Bug#352662: installation-reports
Package: installation-reports
Boot method: network
Image version: 2006/02/10
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso
Date: 2006/02/11
Machine: Epson Direct Endeavor 5000 (Laptop Model)
Processor: Mobile Pentium4 1.7GHz
Memory: 1GB
Partitions: 6GB /, 32GB /home, 1.5GB swap
Output of lspci and lspci -n:
lspci
0000:00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale)
Chipset Host Bridge (rev 04)
0000:00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset
AGP Bridge (rev 04)
0000:00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1)
(rev 02)
0000:00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2)
(rev 02)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
0000:00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC)
(rev 02)
0000:00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 02)
0000:00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM
AC'97 Audio Controller (rev 02)
0000:00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller
(rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon
Mobility M7 LW [Radeon Mobility 7500]
0000:02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:02:07.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8)
0000:02:07.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8)
0000:02:07.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394
Controller
lspci -n
0000:00:00.0 0600: 8086:1a30 (rev 04)
0000:00:01.0 0604: 8086:1a31 (rev 04)
0000:00:1d.0 0c03: 8086:2482 (rev 02)
0000:00:1d.1 0c03: 8086:2484 (rev 02)
0000:00:1e.0 0604: 8086:2448 (rev 42)
0000:00:1f.0 0601: 8086:248c (rev 02)
0000:00:1f.1 0101: 8086:248a (rev 02)
0000:00:1f.3 0c05: 8086:2483 (rev 02)
0000:00:1f.5 0401: 8086:2485 (rev 02)
0000:00:1f.6 0703: 8086:2486 (rev 02)
0000:01:00.0 0300: 1002:4c57
0000:02:05.0 0200: 10ec:8139 (rev 10)
0000:02:07.0 0607: 1180:0476 (rev a8)
0000:02:07.1 0607: 1180:0476 (rev a8)
0000:02:07.2 0c00: 1180:0552
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
I'm quite fond of this distribution.
Some minor problems
Time setting is incorrect. At first, the clock was set to 9 hours
advanced to JST (it shouls be +9:00GMT).
During the X window installation process, the installer asked the
resolution of the display (a laptop panel). I'v selected some
resolution, but no selection is written in xorg.conf file (only
640x480 is in the file).
The holizontal/vertical reflesh rates in the original file also are
not proper. It seems to correspond to a low resolution CRT display.
It was neccessery to change xorg.conf file after installation.
After changing the xorg.conf file, I can get correct resolution
(UXGA, 24bit)
In GNOME desktop, Japanese keyboard layout seems to be pertly
incorrect.
Some keys (such as ']', '}', '_') are not effective in the original
setting. This problem can be avoided by changing keyboard layout
from pc105/Japanese-variation to jp106, using the GNOME preference
utility.
Using locale ja_JP.UTF-8, mlterm cannot display Japanese characters
correctly. In the ja_JP.EUC-JP locale, this problem does not occur.
Error message is sown when I launch mlterm from another terminal.
font -efont-fixed medium-r-normal--16-*-iso10646-1 couldn't be loaded
OSS sound (default setting) did not work, ALSA works pretty well.
--
Teruo KOYAMA
mail: t_koyama<at>.nii.ac.jp
Reply to: