Bug#351487: installation-report
chris@mosfet:~/Desktop$ dmesg
ata2: dev 0 configured for UDMA/133
[4294673.140000] scsi1 : sata_uli
[4294673.140000] Vendor: ATA Model: Maxtor 7L250S0 Rev: BANC
[4294673.140000] Type:
Direct-Access
ANSI SCSI revision: 05
[4294673.147000] ALI15X3: IDE controller at PCI slot 0000:00:12.0
[4294673.147000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 19 (level, low) -> IRQ 19
[4294673.147000] ALI15X3: chipset revision 199
[4294673.147000] ALI15X3: not 100% native mode: will probe irqs later
[4294673.147000] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
[4294673.147000] ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:pio, hdd:pio
[4294673.147000] Probing IDE interface ide0...
[4294673.819000] hda: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive
[4294674.431000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294674.431000] Probing IDE interface ide1...
[4294674.950000] Probing IDE interface ide1...
[4294675.468000] Probing IDE interface ide2...
[4294675.980000] Probing IDE interface ide3...
[4294676.492000] Probing IDE interface ide4...
[4294677.004000] Probing IDE interface ide5...
[4294677.520000] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[4294677.520000] Uniform CD-ROM driver Revision: 3.20
[4294677.524000] SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
[4294677.524000] SCSI device sda: drive cache: write back
[4294677.524000] SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
[4294677.524000] SCSI device sda: drive cache: write back
[4294677.524000] /dev/scsi/host1/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 >
[4294677.586000] Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
[4294677.809000] Attempting manual resume
[4294677.809000] swsusp: Suspend partition has wrong signature?
[4294677.861000] Linux Tulip driver version 1.1.13 (May 11, 2002)
[4294677.861000] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 17 (level, low) -> IRQ 17
[4294677.880000] tulip0: EEPROM default media type Autosense.
[4294677.880000] tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
[4294677.880000] tulip0: Index #1 - Media 10baseT (#0) described by a <unknown> (128) block.
[4294677.880000] tulip0: Index #2 - Media 10baseT (#0) described by a 21140 non-MII (0) block.
[4294677.880000] tulip0: Index #3 - Media 10base2 (#1) described by a 21140 non-MII (0) block.
[4294677.880000] tulip0: Index #4 - Media 10baseT-FDX (#4) described by a 21140 non-MII (0) block.
[4294677.880000] tulip0: Index #5 - Media 100baseTx-FDX (#5) described by a 21140 non-MII (0) block.
[4294677.882000] tulip0: MII transceiver #1 config 1000 status 7849 advertising 01e1.
[4294677.909000] eth0: ULi M5261/M5263 rev 64 at 0001e800, 00:13:8F:36:47:ED, IRQ 17.
[4294677.929000] usbcore: registered new driver usbfs
[4294677.929000] usbcore: registered new driver hub
[4294677.930000] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[4294677.930000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 20 (level, low) -> IRQ 20
[4294677.930000] ohci_hcd 0000:00:13.0: ALi Corporation USB 1.1 Controller
[4294677.941000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[4294677.941000] ohci_hcd 0000:00:13.0: irq 20, io mem 0xfebfe000
[4294677.994000] hub 1-0:1.0: USB hub found
[4294677.994000] hub 1-0:1.0: 3 ports detected
[4294677.997000] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 21 (level, low) -> IRQ 21
[4294677.997000] ohci_hcd 0000:00:13.1: ALi Corporation USB 1.1 Controller (#2)
[4294678.008000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[4294678.008000] ohci_hcd 0000:00:13.1: irq 21, io mem 0xfebfd000
[4294678.061000] hub 2-0:1.0: USB hub found
[4294678.061000] hub 2-0:1.0: 3 ports detected
[4294678.064000] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 22 (level, low) -> IRQ 22
[4294678.064000] ohci_hcd 0000:00:13.2: ALi Corporation USB 1.1 Controller (#3)
[4294678.075000] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[4294678.075000] ohci_hcd 0000:00:13.2: irq 22, io mem 0xfebfc000
[4294678.128000] hub 3-0:1.0: USB hub found
[4294678.128000] hub 3-0:1.0: 3 ports detected
[4294678.150000] ACPI: PCI Interrupt 0000:00:13.3[D] -> GSI 23 (level, low) -> IRQ 23
[4294678.150000] ehci_hcd 0000:00:13.3: ALi Corporation USB 2.0 Controller
[4294678.150000] ehci_hcd 0000:00:13.3: debug port 1
[4294678.171000] ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
[4294678.171000] ehci_hcd 0000:00:13.3: irq 23, io mem 0xfebff800
[4294678.171000] ehci_hcd 0000:00:13.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
[4294678.171000] hub 4-0:1.0: USB hub found
[4294678.171000] hub 4-0:1.0: 8 ports detected
[4294678.227000] r8169 Gigabit Ethernet driver 2.2LK loaded
[4294678.227000] ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 20 (level, low) -> IRQ 20
[4294678.228000] eth1: Identified chip type is 'RTL8169s/8110s'.
[4294678.228000] eth1: RTL8169 at 0xf8892c00, 00:e0:4c:77:2a:5c, IRQ 20
[4294678.801000] usb 1-3: new full speed USB device using ohci_hcd and
address 3[4294679.120000] usb 2-1: new low speed USB device using
ohci_hcd and address 2
[4294680.338000] usbcore: registered new driver hiddev
[4294680.346000] input: USB HID v1.00 Mouse [Cypress Sem PS2/USB Browser Combo Mouse] on usb-0000:00:13.1-1
[4294680.346000] usbcore: registered new driver usbhid
[4294680.346000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
[4294680.876000] ACPI: CPU0 (power states: C1[C1])
[4294681.136000] Attempting manual resume
[4294681.136000] swsusp: Suspend partition has wrong signature?
[4294681.140000] ReiserFS: sda6: found reiserfs format "3.6" with standard journal
[4294682.755000] ReiserFS: sda6: using ordered data mode
[4294682.767000] ReiserFS: sda6: journal params: device sda6, size
8192, journal first block 18, max trans len 1024, max batch 900, max
commit age 30, max trans age 30
[4294682.767000] ReiserFS: sda6: checking transaction log (sda6)
[4294682.789000] ReiserFS: sda6: replayed 5 transactions in 0 seconds
[4294682.911000] ReiserFS: sda6: Using r5 hash to sort names
[4294683.625000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294686.622000] Adding 2096472k swap on /dev/sda3. Priority:-1 extents:1
[4294691.112000] parport: PnPBIOS parport detected.
[4294691.112000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[4294691.196000] lp0: using parport0 (interrupt-driven).
[4294691.220000] mice: PS/2 mouse device common for all mice
[4294694.359000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294695.102000] cdrom: open failed.
[4294758.140000] NTFS driver 2.1.22 [Flags: R/O MODULE].
[4294758.196000] NTFS volume version 3.1.
[4294758.206000] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
[4294758.207000] ReiserFS: sda7: using ordered data mode
[4294758.207000] ReiserFS: sda7: journal params: device sda7, size
8192, journal first block 18, max trans len 1024, max batch 900, max
commit age 30, max trans age 30
[4294758.208000] ReiserFS: sda7: checking transaction log (sda7)
[4294758.223000] ReiserFS: sda7: Using r5 hash to sort names
[4294759.252000] Linux agpgart interface v0.101 (c) Dave Jones
[4294759.258000] agpgart: Unsupported ALi chipset (device id: 1689)
[4294759.319000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294759.329000] shpchp: shpc_init : shpc_cap_offset == 0
[4294759.329000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294759.428000] agpgart: Detected AGP bridge 20
[4294759.428000] Setting up ULi AGP.
[4294759.435000] agpgart: AGP aperture is 64M @ 0xdc000000
[4294759.592000] ali1563: SMBus control = 0403
[4294759.604000] ali1563_probe: Returning 0
[4294759.672000] ali15x3_smbus 0000:00:07.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
[4294759.672000] ali15x3_smbus 0000:00:07.1: ALI15X3 not detected, module not inserted.
[4294759.710000] ali1535_smbus 0000:00:07.1: ALI1535_smb region uninitialized - upgrade BIOS?
[4294759.710000] ali1535_smbus 0000:00:07.1: ALI1535 not detected, module not inserted.
[4294760.200000] ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 21 (level, low) -> IRQ 21
[4294760.201000] rt2500 1.1.0 CVS 2005/07/10 http://rt2x00.serialmonkey.com
[4294760.431000] ACPI: PCI Interrupt 0000:04:07.0[A] -> GSI 22 (level, low) -> IRQ 22
[4294760.439000] ice1724: Invalid EEPROM version 1
[4294761.933000] Bluetooth: Core ver 2.7
[4294761.933000] NET: Registered protocol family 31
[4294761.933000] Bluetooth: HCI device and connection manager initialized
[4294761.933000] Bluetooth: HCI socket layer initialized
[4294761.937000] Bluetooth: HCI USB driver ver 2.8
[4294761.945000] usbcore: registered new driver hci_usb
[4294762.372000] Real Time Clock Driver v1.12
[4294762.416000] input: PC Speaker
[4294762.464000] irda_init()
[4294762.464000] NET: Registered protocol family 23
[4294763.006000] ts: Compaq touchscreen protocol output
[4294763.341000] r8169: eth1: link up
[4294763.353000] NET: Registered protocol family 17
[4294767.509000] NET: Registered protocol family 10
[4294767.509000] Disabled Privacy Extensions on device c02eb280(lo)
[4294767.509000] IPv6 over IPv4 tunneling driver
[4294768.589000] ACPI: Power Button (FF) [PWRF]
[4294768.589000] ACPI: Power Button (CM) [PWRB]
[4294768.629000] ibm_acpi: ec object not found
[4294772.907000] nvidia: module license 'NVIDIA' taints kernel.
[4294772.916000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294772.916000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7667 Fri Jun 17 07:01:04 PDT 2005
[4294773.243000] agpgart: Found an AGP 3.0 compliant device at 0000:00:04.0.
[4294773.243000] agpgart: Putting AGP V3 device at 0000:00:04.0 into 8x mode
[4294773.243000] agpgart: Putting AGP V3 device at 0000:03:00.0 into 8x mode
[4294773.606000] agpgart: Found an AGP 3.0 compliant device at 0000:00:04.0.
[4294773.606000] agpgart: Putting AGP V3 device at 0000:00:04.0 into 8x mode
[4294773.606000] agpgart: Putting AGP V3 device at 0000:03:00.0 into 8x mode
[4294774.418000] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[4294774.418000] apm: overridden by ACPI.
[4294774.718000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.4)
[4294774.719000] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6 (1400 mV)
[4294774.719000] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 (1350 mV)
[4294774.719000] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0xa (1300 mV)
[4294774.719000] cpu_init done, current fid 0xc, vid 0x6
[4294774.932000] Bluetooth: L2CAP ver 2.7
[4294774.932000] Bluetooth: L2CAP socket layer initialized
[4294774.970000] Bluetooth: RFCOMM ver 1.5
[4294774.970000] Bluetooth: RFCOMM socket layer initialized
[4294774.970000] Bluetooth: RFCOMM TTY layer initialized
[4294777.911000] eth1: no IPv6 routers present
# this is my full dmesg, it seems the sata is pretty much at the very top.
On 2/5/06, Christian Perrier <bubulle@debian.org
> wrote:Quoting Chris Stahl (thechris.ieee@gmail.com
):
> chris@mosfet:~/Desktop$ dmesg | grep sata
> [4294673.140000] scsi1 : sata_uli
>
> And the mobo is a ULI based one. there is a Jmicron sata2 controller on it
> as well, but it is not supported. only the southbridge (uli) sata ports are
> supported in linux as far as i can tell. I am 100% positive that sata_uli
> is the correct module for the sata1 ports on the motherboard, it is what i
Sure. But my problem is being sure that this module has to be loaded
for the 10b9:5289 PCI device.
For the installer to recognize this device and load the driver, I have
to put the module in a PCI<->modules map in discover1-data and, among
all PCI IDs of your system, I need to find THE one for the SATA
controller.
Could you paste the messages from dmesg that ar eimmediately before
and after the above line, please?
Reply to: