Bug#351487: installation-report
Package: installation-reports
Boot method: CD
Image version: debian-testing-i386-netinst.iso
Date: Feburary 5, 2006
Machine: custom build
Processor: Athlon64 3200+ socket939 winchester 2000Mhz
Memory: 1GB pc3200 cas2
Partitions: Not Detected
Output of lspci and lspci -n: chris@mosfet:~/Desktop$ lspci
0000:00:00.0 Host bridge: ALi Corporation: Unknown device 1695
0000:00:01.0 PCI bridge: ALi Corporation: Unknown device 524b
0000:00:02.0 PCI bridge: ALi Corporation: Unknown device 524c
0000:00:04.0 Host bridge: ALi Corporation: Unknown device 1689
0000:00:05.0 PCI bridge: ALi Corporation: Unknown device 5246
0000:00:06.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge
0000:00:07.0 ISA bridge: ALi Corporation M1563 HyperTransport South Bridge (rev 70)
0000:00:07.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
0000:00:11.0 Ethernet controller: ALi Corporation: Unknown device 5263 (rev 40)
0000:00:12.0 IDE interface: ALi Corporation M5229 IDE (rev c7)
0000:00:12.1 IDE interface: ALi Corporation: Unknown device 5289 (rev 10)
0000:00:13.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:13.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:13.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:13.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:03:00.0 VGA compatible controller: nVidia Corporation NV40 OS1RT00B30 (rev a1)
0000:04:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
0000:04:06.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)
0000:04:07.0 Multimedia audio controller: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller (rev 01)
chris@mosfet:~/Desktop$ lspci-n
bash: lspci-n: command not found
chris@mosfet:~/Desktop$ lspci -n
0000:00:00.0 0600: 10b9:1695
0000:00:01.0 0604: 10b9:524b
0000:00:02.0 0604: 10b9:524c
0000:00:04.0 0600: 10b9:1689
0000:00:05.0 0604: 10b9:5246
0000:00:06.0 0604: 10b9:5249
0000:00:07.0 0601: 10b9:1563 (rev 70)
0000:00:07.1 0680: 10b9:7101
0000:00:11.0 0200: 10b9:5263 (rev 40)
0000:00:12.0 0101: 10b9:5229 (rev c7)
0000:00:12.1 0101: 10b9:5289 (rev 10)
0000:00:13.0 0c03: 10b9:5237 (rev 03)
0000:00:13.1 0c03: 10b9:5237 (rev 03)
0000:00:13.2 0c03: 10b9:5237 (rev 03)
0000:00:13.3 0c03: 10b9:5239 (rev 01)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:03:00.0 0300: 10de:0041 (rev a1)
0000:04:05.0 0200: 10ec:8169 (rev 10)
0000:04:06.0 0280: 1814:0201 (rev 01)
0000:04:07.0 0401: 1412:1724 (rev 01)
chris@mosfet:~/Desktop$
## this is from my Ubuntu install. I could not detect a disk in the installer.
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems: Installer failed to recognize my SATA disk. sata-uli is the correct module. Installer asked me to choose the module for me drive. I tried all sata modules, and libata, and ahci. None of these worked. The drive is detected in Ubuntu and Gentoo. Sadly, I don't have the time right now to find a workaround and will have to try a different distro or go back to gentoo.
Reply to: