Bug#350259: logfile
dmesg > dmesg.txt
Total memory = 512MB; using 1024kB for hash table (at c0400000)
Linux version 2.6.12-1-powerpc (buildd@voltaire) (gcc version 4.0.2 20050917 (prerelease) (Debian 4.0.1-8)) #1 Tue Sep 27 10:28:44 UTC 2005
Pegasos l2cr : L2 cache was not active, activating
PCI bus 0 controlled by pci at 80000000
PCI bus 0 controlled by pci at c0000000
On node 0 totalpages: 131072
DMA zone: 131072 pages, LIFO batch:31
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/hda2
PID hash table entries: 4096 (order: 12, 65536 bytes)
time_init: decrementer frequency = 33.333333 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 512512k available (2268k kernel code, 1152k data, 192k init, 0k highmem)
Calibrating delay loop... 665.60 BogoMIPS (lpj=332800)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1834k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
Thermal assist unit not available
audit: initializing netlink socket (disabled)
audit(1138444974.149:0): initialized
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: No ATY,RefCLK property !
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=200.00 Mhz, System=166.00 MHz
radeonfb: PLL min 20000 max 40000
radeonfb: Monitor 1 type CRT found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
Console: switching to colour frame buffer device 160x64
radeonfb (0001:01:08.0): ATI Radeon Yd
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
input: Macintosh mouse button emulation
Warning: no ADB interface detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 192k init 68k pmac 36k prep
NET: Registered protocol family 1
VP_IDE: IDE controller at PCI slot 0000:00:0c.1
VP_IDE: chipset revision 6
VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci0000:00:0c.1
VP_IDE: 100% native mode on irq 14
ide0: BM-DMA at 0x1020-0x1027, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1028-0x102f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG SP1604N, ATA DISK drive
ide0 at 0x1000-0x1007,0x100e on irq 14
Probing IDE interface ide1...
hda: max request size: 1024KiB
hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: RDSK (512) p1 (LNX^@)(res 2 spb 1) p2 (XFS^@)(res 2 spb 1) p3 (SWP^@)(res 2 spb 1) p4 (EXT^C)(res 2 spb 1)
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
atkbd.c: keyboard reset failed on isa0060/serio1
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:0c.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:0c.2: irq 9, io base 0x00001040
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:0c.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:0c.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:0c.3: irq 9, io base 0x00001060
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: new low speed USB device using uhci_hcd and address 2
input: AT Translated Set 2 keyboard on isa0060/serio0
usbcore: registered new driver hiddev
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-0000:00:0c.2-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Attempting manual resume
swsusp: Suspend partition has wrong signature?
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem hda2
Ending clean XFS mount for filesystem: hda2
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
PCI: Enabling device 0000:00:01.0 (0000 -> 0003)
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[80000000-800007ff] Max Packet=[2048]
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
PCI: Enabling device 0000:00:0d.0 (0000 -> 0003)
eth0: VIA Rhine II at 0x80000800, 00:0b:2f:45:42:c2, IRQ 9.
eth0: MII PHY found at address 16, status 0x786d advertising 01e1 Link 45e1.
MV-643xx 10/100/1000 Ethernet Driver
eth1: port 1 with MAC address 00:00:00:00:00:00
eth1: RX NAPI Enabled
vt596_smbus 0000:00:0c.4: SMBUS: Error: Host SMBus controller not enabled! - upgrade BIOS or use force=1
irda_init()
NET: Registered protocol family 23
PCI: Enabling device 0000:00:0c.6 (0000 -> 0001)
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011060000004b2f]
eth1394: $Rev: 1247 $ Ben Collins <bcollins@debian.org>
eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
VIA 82xx Modem: probe of 0000:00:0c.6 failed with error -13
PCI: Enabling device 0000:00:0c.5 (0000 -> 0001)
Adding 1951888k swap on /dev/hda3. Priority:-1 extents:1
SCSI subsystem initialized
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
XFS mounting filesystem hda4
Ending clean XFS mount for filesystem: hda4
NET: Registered protocol family 17
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925
[drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 SE]
[drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
[drm:drm_unlock] *ERROR* Process 2291 using kernel context 0
Reply to: