Bug#332663: INSTALL REPORT
Package: installation-reports
INSTALL REPORT
Debian-installer-version: 6 October 2005, cdimage.debian.org
uname -a: Linux triceps 2.6.8-2-386 #1 Thu May 19 17:40:50 JST 2005 i686 GNU/Linux
Date: 6 October 2005, 2:00 pm
Method: How did you install? Network Install
What did you boot off? CDROM
If network install, from where? debian.mirrors.tds.net
Proxied? No
Machine: Dell Poweredge 1300
Processor: Pentium 2
Memory: 64 MB
Root Device: SCSI (Perc 2/SC, MegaRaid driver), /dev/sda
Root Size/partition table:
Disk /dev/sda: 4559 MB, 4559208448 bytes
255 heads, 63 sectors/track, 554 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 524 554 249007+ 82 Linux swap / Solaris
/dev/sda2 * 1 523 4200966 83 Linux
/dev/sda2 mounted root
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
0000:00:02.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:0d.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC AGP (rev 7a)
0000:02:09.0 PCI bridge: Intel Corp. 80960RP [i960 RP Microprocessor/Bridge] (rev 03)
0000:02:09.1 SCSI storage controller: Intel Corp. 80960RP [i960RP Microprocessor] (rev 03)
0000:02:0b.0 SCSI storage controller: Adaptec AHA-2940U2/U2W / 7890/7891 (rev 01)
0000:00:00.0 0600: 8086:7190 (rev 03)
0000:00:01.0 0604: 8086:7191 (rev 03)
0000:00:02.0 0604: 1011:0024 (rev 03)
0000:00:07.0 0601: 8086:7110 (rev 02)
0000:00:07.1 0101: 8086:7111 (rev 01)
0000:00:07.2 0c03: 8086:7112 (rev 01)
0000:00:07.3 0680: 8086:7113 (rev 02)
0000:00:0d.0 0200: 8086:1229 (rev 05)
0000:01:00.0 0300: 1002:4757 (rev 7a)
0000:02:09.0 0604: 8086:0960 (rev 03)
0000:02:09.1 0100: 8086:1960 (rev 03)
0000:02:0b.0 0100: 9005:001f (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
I had to manually load the megaraid and sd_mod modules before the
installer would recognize the disk drives. The aic7xxx module, on
which the perc2/sc controller depends was loaded correctly. No
other significant problems.
Install logs and other status info is available
in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: