Bug#331685: Package: installation-reports
Package: installation-reports
INSTALL REPORT
Debian-installer-version: Installer supplied with Debian 3.1 (Sarge)
from edmunds-enterprises.com, files dated 06/07/2005 on two DVDs
uname -a: Linux EAK1 2.4.27-2-686 #1 Mon May 16 17:03:22 JST 2005 i686
Date: Installed over several days Sept 2005
Method: Booted from DVD, used installer, auto run
Machine: Self built with Albatron PX845E Pro II motherboard (mostly
Intel chip set)
Processor: Pentium IV 2.4 GHz
Memory: 1GB
Root Device: IDE Maxtor 40 GB, hda
Root Size 20 GB
Output of lspci and lspci -n:
for lspci:
0000:00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host
Bridge (rev 11)
0000:00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP
Bridge (rev 11)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB
2.0 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 81)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) LPC
Bridge (rev 01)
0000:00:1f.1 IDE interface: Intel Corp. 82801DB/DBL (ICH4/ICH4-L)
UltraATA-100 IDE Controller (rev 01)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200
QL [Radeon 8500 LE]
0000:02:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE (CNR)
Ethernet Controller (rev 81)
for lspci-n:
0000:00:00.0 0600: 8086:1a30 (rev 11)
0000:00:01.0 0604: 8086:1a31 (rev 11)
0000:00:1d.0 0c03: 8086:24c2 (rev 01)
0000:00:1d.1 0c03: 8086:24c4 (rev 01)
0000:00:1d.2 0c03: 8086:24c7 (rev 01)
0000:00:1d.7 0c03: 8086:24cd (rev 01)
0000:00:1e.0 0604: 8086:244e (rev 81)
0000:00:1f.0 0601: 8086:24c0 (rev 01)
0000:00:1f.1 0101: 8086:24cb (rev 01)
0000:00:1f.3 0c05: 8086:24c3 (rev 01)
0000:00:1f.5 0401: 8086:24c5 (rev 01)
0000:01:00.0 0300: 1002:514c
0000:02:08.0 0200: 8086:103a (rev 81)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
For the most part, installation was very smooth. One problem was that
the resolution choices are too coarse for my monitor; I need to go back
and try to change this. So far this had not been obvious, as I can get
back to the screen giving me a choice, but the choices do not match what
I have. One good point: even the sound seems to have been set up. It has
been a great help that I have replaceable hard drives (dock mounted) so
I can change them out when needed.
Install logs and other status info is available in
/var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Package: installation-reports
INSTALL REPORT
Debian-installer-version: Installer supplied with Debian 3.1 (Sarge) from edmunds-enterprises.com, files dated 06/07/2005 on two DVDs
uname -a: Linux EAK1 2.4.27-2-686 #1 Mon May 16 17:03:22 JST 2005 i686
Date: Installed over several days Sept 2005
Method: Booted from DVD, used installer, auto run
Machine: Self built with Albatron PX845E Pro II motherboard (mostly Intel chip set)
Processor: Pentium IV 2.4 GHz
Memory: 1GB
Root Device: IDE Maxtor 40 GB, hda
Root Size 20 GB
Output of lspci and lspci -n:
for lspci:
0000:00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 11)
0000:00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 11)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 81)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) LPC Bridge (rev 01)
0000:00:1f.1 IDE interface: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) UltraATA-100 IDE Controller (rev 01)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE]
0000:02:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE (CNR) Ethernet Controller (rev 81)
for lspci-n:
0000:00:00.0 0600: 8086:1a30 (rev 11)
0000:00:01.0 0604: 8086:1a31 (rev 11)
0000:00:1d.0 0c03: 8086:24c2 (rev 01)
0000:00:1d.1 0c03: 8086:24c4 (rev 01)
0000:00:1d.2 0c03: 8086:24c7 (rev 01)
0000:00:1d.7 0c03: 8086:24cd (rev 01)
0000:00:1e.0 0604: 8086:244e (rev 81)
0000:00:1f.0 0601: 8086:24c0 (rev 01)
0000:00:1f.1 0101: 8086:24cb (rev 01)
0000:00:1f.3 0c05: 8086:24c3 (rev 01)
0000:00:1f.5 0401: 8086:24c5 (rev 01)
0000:01:00.0 0300: 1002:514c
0000:02:08.0 0200: 8086:103a (rev 81)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
For the most part, installation was very smooth. One problem was that the resolution choices are too coarse for my monitor; I need to go back and try to change this. So far this had not been obvious, as I can get back to the screen giving me a choice, but the choices do not match what I have. One good point: even the sound seems to have been set up. It has been a great help that I have replaceable hard drives (dock mounted) so I can change them out when needed.
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: