Bug#329011: Debian Installation Report
Package: installation-reports
Debian-installer-version: Debian Sarge 3.1 DVD, delivered by Linux Magazine
uname -a: Linux antinlinux 2.4.27-2-386 #1 Mon May 16 16:47:51 JST 2005 i686 GNU/Linux
Date: 30.08.2005
Method: Empty and brand new computer, boot from distribution DVD.
Machine: Custom,
Processor: AMD Sempron 2800+
Motherboard: K8Upgrade-1689
Memory: 512MB
Root Device: Unknown
Root Size/partition table: Unknown, how to extract this information?
/dev/hda1/ ext3 185.5GB
tmpfs /dev/shm tmpfs 252MB
Output of lspci and lspci -n:
antti@antinlinux:~$ lspci
0000:00:00.0 Host bridge: ALi Corporation: Unknown device 1689
0000:00:01.0 PCI bridge: ALi Corporation: Unknown device 5246
0000:00:02.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge
0000:00:03.0 ISA bridge: ALi Corporation M1563 HyperTransport South Bridge (rev 70)
0000:00:03.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
0000:00:04.0 Multimedia audio controller: ALi Corporation M5455 PCI AC-Link Controller Audio Device (rev 20)
0000:00:0d.0 Ethernet controller: ALi Corporation: Unknown device 5263 (rev 40)
0000:00:0e.0 IDE interface: ALi Corporation M5229 IDE (rev c7)
0000:00:0e.1 Unknown mass storage controller: ALi Corporation: Unknown device 5289 (rev 10)
0000:00:0f.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:0f.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:0f.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:0f.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
0000:02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
antti@antinlinux:~$ lspci -n
0000:00:00.0 0600: 10b9:1689
0000:00:01.0 0604: 10b9:5246
0000:00:02.0 0604: 10b9:5249
0000:00:03.0 0601: 10b9:1563 (rev 70)
0000:00:03.1 0680: 10b9:7101
0000:00:04.0 0401: 10b9:5455 (rev 20)
0000:00:0d.0 0200: 10b9:5263 (rev 40)
0000:00:0e.0 0101: 10b9:5229 (rev c7)
0000:00:0e.1 0180: 10b9:5289 (rev 10)
0000:00:0f.0 0c03: 10b9:5237 (rev 03)
0000:00:0f.1 0c03: 10b9:5237 (rev 03)
0000:00:0f.2 0c03: 10b9:5237 (rev 03)
0000:00:0f.3 0c03: 10b9:5239 (rev 01)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:00.0 0300: 1002:5159
0000:02:05.0 0200: 10ec:8139 (rev 10)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [E]
Config network: [E]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [E]
Create file systems: [E]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [O]
Reboot: [ ]
Comments/Problems:
Couldn't find integrated network adapter in motherboard.
Problem solved by buying ethernet PCI board.
Custom harddrive partition failed. Then used default partition.
Motherboard integrated sound card is not working.
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
When selection window opened, where system purpose was
selected, I didn't know I should use space bar to select
desired system. I just pressed enter and Debian installed
mail server as default without X. I was pretty confused.
Debian distribution which came with Linux Magazine wasn't
full distribution and I met quite nasty problems.
I would be happy to hear, when ASRock K8Upgrade-1689 motherboard
is fully supported.
Reply to: