Bug#327299: installation report
Package: installation-reports
Debian-installer-version: 06-Sep-2005 from
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/
uname -a: Linux hostname 2.6.8-2-386 #1 Thu May 19 17:40:50 JST 2005
i686 GNU/Linux
Date: 08-Sep-2005
Method: used the debian-installer cd for "testing"
Machine: assembled from parts, uses an Abit AN7 for the main board
Processor: AMD Athlon 3000+ barton core at 333MHz FSB
Memory: 1.5 GB ddr 400 running at 333
Root Device: 60 GB Maxtor IDE drive
Root Size/partition table: hda1:NTFS hda2:ext3(1st debian install)
hda4:ext3(this install) hda5:swap hda6:NTFS
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
version?) (rev c1)
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet
Controller (rev a1)
0000:00:05.0 Multimedia audio controller: nVidia Corporation nForce
Audio Processing Unit (rev a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2
AC97 Audio Controler (MCP) (rev a1)
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
0000:00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire
(IEEE 1394) Controller (rev a3)
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
0000:01:07.0 USB Controller: NEC Corporation USB (rev 41)
0000:01:07.1 USB Controller: NEC Corporation USB (rev 41)
0000:01:07.2 USB Controller: NEC Corporation USB 2.0 (rev 02)
0000:01:08.0 Ethernet controller: Atheros Communications, Inc.:
Unknown device 001a (rev 01)
0000:01:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3112
[SATALink/SATARaid] Serial ATA Controller (rev 02)
0000:02:00.0 VGA compatible controller: ATI Technologies Inc RV350 AR
[Radeon 9600]
0000:02:00.1 Display controller: ATI Technologies Inc RV350 AR [Radeon
9600] (Secondary)
0000:00:00.0 0600: 10de:01e0 (rev c1)
0000:00:00.1 0500: 10de:01eb (rev c1)
0000:00:00.2 0500: 10de:01ee (rev c1)
0000:00:00.3 0500: 10de:01ed (rev c1)
0000:00:00.4 0500: 10de:01ec (rev c1)
0000:00:00.5 0500: 10de:01ef (rev c1)
0000:00:01.0 0601: 10de:0060 (rev a4)
0000:00:01.1 0c05: 10de:0064 (rev a2)
0000:00:02.0 0c03: 10de:0067 (rev a4)
0000:00:02.1 0c03: 10de:0067 (rev a4)
0000:00:02.2 0c03: 10de:0068 (rev a4)
0000:00:04.0 0200: 10de:0066 (rev a1)
0000:00:05.0 0401: 10de:006b (rev a2)
0000:00:06.0 0401: 10de:006a (rev a1)
0000:00:08.0 0604: 10de:006c (rev a3)
0000:00:09.0 0101: 10de:0065 (rev a2)
0000:00:0d.0 0c00: 10de:006e (rev a3)
0000:00:1e.0 0604: 10de:01e8 (rev c1)
0000:01:07.0 0c03: 1033:0035 (rev 41)
0000:01:07.1 0c03: 1033:0035 (rev 41)
0000:01:07.2 0c03: 1033:00e0 (rev 02)
0000:01:08.0 0200: 168c:001a (rev 01)
0000:01:0b.0 0104: 1095:3112 (rev 02)
0000:02:00.0 0300: 1002:4152
0000:02:00.1 0380: 1002:4172
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [ O ]
Configure network HW: [ E ]
Config network: [ E ]
Detect CD: [ O ]
Load installer modules: [ O ]
Detect hard drives: [ O ]
Partition hard drives: [ ]
Create file systems: [ O ]
Mount partitions: [ O ]
Install base system: [ O ]
Install boot loader: [ ]
Reboot: [ O ]
Comments/Problems:
The network installation cd lacked ndiswrapper and wpasupplicant. I
built ndiswrapper using the same kernel the install cd used on my 1st
debian install then copied it and its related files to get wireless
working. I also copied wpasupplicant so I could use the wireless
network. Then I was able to use dhclinet to get an ip address and
dselect to install the rest of the system.
Reply to: