Frans Pop wrote:
tags 308236 - patch thanks On Monday 09 May 2005 00:45, Patrick Donker wrote:I have installed from the 10 may 2005 daily build on a generic P3-866 system with a Compaq 3200 Disk Array controller. Everything went well, until the system booted into the newly installed Deb. While starting rcS.d it got to S30checkfs.sh. The check returned /dev/ida/c0d0p1 is not a valid block device.[...]I have renamed S40hotplug to S29hotplug and rebooted, to find that everything ran smoothly; the error as above didnt occur any longer.The better short term solution would be to add the module(s) needed for that drive in your /etc/modules instead of waiting for hotplug to load it.I think the real problem is that the initrd is supposed to load all modules needed to mount partitions used for your system. However, I may be wrong about that and in that case discover should take care of it. So the bug is either in initrd-tools or discover1-data.Could you please send us the output of 'lspci' and 'lspci -n' for your system so we may check if your controller is listed in discover's hardware database?Cheers, FJP
Hi Joris, Herewith the lspci and lspci -n output you requested. There must have been a radical change in the installer between D-I rc2 and rc3 because I had this exact hardware installed and running using some daily rc2 build. Problem is that I cant remember which one. I moved the hardware to another casing that could hold more disks, so I did a reinstall. Now, using the build I filed the bug report against, I run into this problem. If you need more info, pls let me know. Cheers, Patrick lspci: 0000:00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02) 0000:00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset GraphicsController] (rev 02) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 11) 0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 11) 0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 11) 0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 11) 0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 11) 0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 11) 0000:01:08.0 Ethernet controller: Intel Corp. 82801BA/BAM/CA/CAM Ethernet Controller (rev 03) 0000:01:0b.0 PCI bridge: IBM IBM27-82351 (rev 07) 0000:02:00.0 Unknown mass storage controller: Compaq Computer Corporation Smart-2/P RAID Controller (rev 04) lspci -n: 0000:00:00.0 0600: 8086:1130 (rev 02) 0000:00:02.0 0300: 8086:1132 (rev 02) 0000:00:1e.0 0604: 8086:244e (rev 11) 0000:00:1f.0 0601: 8086:2440 (rev 11) 0000:00:1f.1 0101: 8086:244b (rev 11) 0000:00:1f.2 0c03: 8086:2442 (rev 11) 0000:00:1f.3 0c05: 8086:2443 (rev 11) 0000:00:1f.4 0c03: 8086:2444 (rev 11) 0000:01:08.0 0200: 8086:2449 (rev 03) 0000:01:0b.0 0604: 1014:0022 (rev 07) 0000:02:00.0 0180: 0e11:ae10 (rev 04)