Bug#304164: Loose CD to install the basesystem
Package: debian-installer
severity: grave
Debian-installer-version: rc3, 24.03.2005
uname -a: Linux huba 2.4.26-1-386 #1 Thu Jul 22 12:46:23 JST 2004 i686
GNU/Linux
Date: 11.04.2005
Method: sarge-i386-netinst.iso
Machine: noname workstation
Processor: P4 2.8 GHz
Memory: 512 MByte
Root Device: /dev/hda1
Root Size/partition table:
/dev/hda1 on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
/dev/hda3 on /home type ext3 (rw)
/dev/hda4 on /usr/local type ext3 (rw)
usbfs on /proc/bus/usb type usbfs (rw)
Output of lspci and lspci -n:
lspci
0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
0000:00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated Graphics Device (rev 02)
0000:00:03.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to CSA Bridge (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
0000:01:01.0 Ethernet controller: Intel Corp. 82547EI Gigabit Ethernet Controller (LOM)
lspci -n
0000:00:00.0 0600: 8086:2570 (rev 02)
0000:00:02.0 0300: 8086:2572 (rev 02)
0000:00:03.0 0604: 8086:2573 (rev 02)
0000:00:1d.0 0c03: 8086:24d2 (rev 02)
0000:00:1d.1 0c03: 8086:24d4 (rev 02)
0000:00:1d.2 0c03: 8086:24d7 (rev 02)
0000:00:1d.3 0c03: 8086:24de (rev 02)
0000:00:1d.7 0c03: 8086:24dd (rev 02)
0000:00:1e.0 0604: 8086:244e (rev c2)
0000:00:1f.0 0601: 8086:24d0 (rev 02)
0000:00:1f.1 0101: 8086:24db (rev 02)
0000:00:1f.3 0c05: 8086:24d3 (rev 02)
0000:00:1f.5 0401: 8086:24d5 (rev 02)
0000:01:01.0 0200: 8086:1019
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't
try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [E]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
All seems to go well, until the system can't install the Basesystem
from the CD. I check the mountpoint, and see that the CD was well
mounted on /cdrom.
I install with a net-iso from last september and all looks good.
The hardware I use is normal, no raid, sata or anything else.
Wy the Installer loose the CD?
--
Regards
Ralf Springwald
----------------------------------------------
Reply to: