Bug#303363: installation-reports
Package: installation-reports
Debian-installer-version: 050331, sarge cd-net-install
uname -a: updated the kernel to 2.6.10-1-686
Date: 050331
Method: used the cd to boot
Machine: Shuttle SG62G2
Processor: Celeron D (533) 2.4ghz
Memory: 1024 pc3200
Root Device: <2 x maxtor 200gb (raid0)>
Root Size/partition table: <2.8gb /boot (hda), 2.8gb swap (hdb), the rest
raided as / using raid0>
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub
Interface (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller
(rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI
#1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI
#2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI
#3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI
#4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI
Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge
(rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA
100 Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller
(rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller (rev 02)
0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device
00f2 (rev a2)
0000:02:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:02:08.0 Ethernet controller: Intel Corp. 82562EZ 10/100 Ethernet
Controller (rev 02)
lspci -n
0000:00:00.0 0600: 8086:2570 (rev 02)
0000:00:01.0 0604: 8086:2571 (rev 02)
0000:00:1d.0 0c03: 8086:24d2 (rev 02)
0000:00:1d.1 0c03: 8086:24d4 (rev 02)
0000:00:1d.2 0c03: 8086:24d7 (rev 02)
0000:00:1d.3 0c03: 8086:24de (rev 02)
0000:00:1d.7 0c03: 8086:24dd (rev 02)
0000:00:1e.0 0604: 8086:244e (rev c2)
0000:00:1f.0 0601: 8086:24d0 (rev 02)
0000:00:1f.1 0101: 8086:24db (rev 02)
0000:00:1f.3 0c05: 8086:24d3 (rev 02)
0000:00:1f.5 0401: 8086:24d5 (rev 02)
0000:01:00.0 0300: 10de:00f2 (rev a2)
0000:02:06.0 0200: 10ec:8139 (rev 10)
0000:02:08.0 0200: 8086:1050 (rev 02)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Create file systems: [E]
Mount partitions: [E]
Install base system: [O]
Install boot loader: [E]
Reboot: [O]
Comments/Problems:
second attempt to install raid0, but this time using ide instead of sata
which should be easier. (got only sata raid0 working on a 2.4.xx kernel)
had some troubles finding info how the partitiontable should look like to
achieve raid0. first, raided everything. got problems all the time with
base system, boot loader, partitiontable and so on.got the idea to create
a /boot on hda where the bootloader was placed and put the swap on hdb,
both ofcause the same size. raided the rest as /.
had also some problems to get the correct drivers to my nvidia GF6600
card. driver "nv" didnt work, had to use vesa until i installed the nvidia
driver available at their site.
thank you for a great dist.!
/axel
Reply to: