Bug#301960: grub installation fails with HP Smart Array 6i (cciss) using rc3 2.6 installer
Package: installation-reports
Debian-installer-version: rc3 for i386 from cdimage.debian.org
uname -a: Linux testi 2.6.8-2-386 #1 Mon Jan 24 03:01:58 EST 2005 i686 unknown
Date: Tue 29 Mar 2005 12:30
Method: Booted from rc3/i386 CD, and ran "linux26" installer.
Machine: HP Proliant DL380 G4 server
Processor: Intel Xeon 3,2 GHz 1MB
Memory: 2 GB ECC
Root Device: HP Smart Array 6i / cciss partition 2 (/dev/cciss/c0d0p2)
Root Size/partition table:
Disk /dev/cciss/c0d0: 35139 cylinders, 255 heads, 32 sectors/track
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/cciss/c0d0p1 * 0+ 31 32- 257008+ 83 Linux
/dev/cciss/c0d0p2 32 517 486 3903795 83 Linux
/dev/cciss/c0d0p3 518 760 243 1951897+ 83 Linux
/dev/cciss/c0d0p4 761 882 122 979965 5 Extended
/dev/cciss/c0d0p5 761+ 882 122- 979933+ 82 Linux swap
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. Server Memory Controller Hub (rev 0c)
0000:00:02.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port A0 (rev 0c)
0000:00:06.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port C0 (rev 0c)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02)
0000:01:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 01)
0000:01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out Processor (rev 01)
0000:02:00.0 PCI bridge: Intel Corp. PCI Bridge Hub A (rev 09)
0000:02:00.2 PCI bridge: Intel Corp. PCI Bridge Hub B (rev 09)
0000:03:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
0000:03:01.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
0000:04:03.0 RAID bus controller: Compaq Computer Corporation Smart Array 64xx (rev 01)
0000:05:00.0 PCI bridge: Intel Corp. PCI Bridge Hub A (rev 09)
0000:05:00.2 PCI bridge: Intel Corp. PCI Bridge Hub B (rev 09)
0000:00:00.0 0600: 8086:3590 (rev 0c)
0000:00:02.0 0604: 8086:3595 (rev 0c)
0000:00:06.0 0604: 8086:3599 (rev 0c)
0000:00:1d.0 0c03: 8086:24d2 (rev 02)
0000:00:1d.1 0c03: 8086:24d4 (rev 02)
0000:00:1d.2 0c03: 8086:24d7 (rev 02)
0000:00:1d.3 0c03: 8086:24de (rev 02)
0000:00:1d.7 0c03: 8086:24dd (rev 02)
0000:00:1e.0 0604: 8086:244e (rev c2)
0000:00:1f.0 0601: 8086:24d0 (rev 02)
0000:00:1f.1 0101: 8086:24db (rev 02)
0000:01:03.0 0300: 1002:4752 (rev 27)
0000:01:04.0 0880: 0e11:b203 (rev 01)
0000:01:04.2 0880: 0e11:b204 (rev 01)
0000:02:00.0 0604: 8086:0329 (rev 09)
0000:02:00.2 0604: 8086:032a (rev 09)
0000:03:01.0 0200: 14e4:1648 (rev 10)
0000:03:01.1 0200: 14e4:1648 (rev 10)
0000:04:03.0 0104: 0e11:0046 (rev 01)
0000:05:00.0 0604: 8086:0329 (rev 09)
0000:05:00.2 0604: 8086:032a (rev 09)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [E]
Reboot: [O]
Comments/Problems:
Grub installation fails. The error from third console (alt+f3) is:
"file /boot/grub/stage1 not read correctly"
When installing with 2.4 kernel (the default) grub installs OK and works OK.
Reply to: