Bug#299466: businesscard with kernel 2.6
Package: installation-reports
Debian-installer-version: sarge-i386-businesscard.iso
uname -a: I couldn't install, so I can't tell. Date: March 11, 2005
Method: Run from CD, used DHCP. No proxy.
Machine: Dell 600M
Processor: Centrino 1.4Ghz
Memory: 512Mb
Root Device: IDE. Samsumg 40Gb.
Root Size/partition table:
Disk /dev/hda: 40.0 GB, 40060403712 bytes
255 heads, 63 sectors/track, 4870 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 974 7823623+ 83 Linux
/dev/hda2 975 1097 987997+ 82 Linux swap /
Solaris
/dev/hda3 1098 4870 30306622+ 5 Extended
/dev/hda5 1098 4137 24418768+ 83 Linux
/dev/hda6 * 4138 4502 2931831 83 Linux <--------
WANTED TO INSTALL DEBIAN HERE.
/dev/hda7 4503 4870 2955928+ 83 Linux
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O
Controller (rev 03)
0000:00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP
Controller (rev 03)
0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M)
USB2 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
0000:00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC
Interface Bridge (rev 01)
0000:00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE
Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corporation
82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250
Lf [FireGL 9000] (rev 01)
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme
BCM5702X Gigabit Ethernet (rev 02)
0000:02:01.0 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus
Controller (rev 20)
0000:02:01.1 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus
Controller (rev 20)
0000:02:03.0 Network controller: Intel Corporation PRO/Wireless LAN 2100
3B Mini PCI Adapter (rev 04)
0000:00:00.0 Class 0600: 8086:3340 (rev 03)
0000:00:01.0 Class 0604: 8086:3341 (rev 03)
0000:00:1d.0 Class 0c03: 8086:24c2 (rev 01)
0000:00:1d.1 Class 0c03: 8086:24c4 (rev 01)
0000:00:1d.2 Class 0c03: 8086:24c7 (rev 01)
0000:00:1d.7 Class 0c03: 8086:24cd (rev 01)
0000:00:1e.0 Class 0604: 8086:2448 (rev 81)
0000:00:1f.0 Class 0601: 8086:24cc (rev 01)
0000:00:1f.1 Class 0101: 8086:24ca (rev 01)
0000:00:1f.5 Class 0401: 8086:24c5 (rev 01)
0000:00:1f.6 Class 0703: 8086:24c6 (rev 01)
0000:01:00.0 Class 0300: 1002:4c66 (rev 01)
0000:02:00.0 Class 0200: 14e4:16a6 (rev 02)
0000:02:01.0 Class 0607: 1217:7113 (rev 20)
0000:02:01.1 Class 0607: 1217:7113 (rev 20)
0000:02:03.0 Class 0280: 8086:1043 (rev 04)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [E]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
The installation failed when running kernel 2.6. It wasn't able to
create the file system. Tried to change partition from logical to
primary. Worked, but got again the same problem.
Restarted with kernel 2.4 and no problem!
Reply to: