Bug#294723: installation-reports
Package: installation-reports
Debian-installer-version: debian sarge rc2 i386 net install
http://www.debian.org/devel/debian-installer/
down loaded on 2005-02-10
uname -a: Linux Pixie248 2.6.8-1-386 #1 Thu Nov 11 12:18:43 EST 2004 i686 GNU/Linux
Date: 2005-02-10 13:00
Method: cd boot of linux26, net install from ftp.uk.debian.org, no proxy
Machine: Dell Dimension 5000
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory: 512 Mb
Root Device: /dev/sda (SATA)
Root Size/partition table:
Disk /dev/sda: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 486 3903763+ 83 Linux /boot
/dev/sda2 19210 19452 1951897+ 82 Linux swap
/dev/sda3 487 19209 150392497+ 83 Linux /
Partition table entries are not in disk order
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 915G/P/GV Processor to I/O Controller (rev 04)
0000:00:01.0 PCI bridge: Intel Corp. 915G/P/GV PCI Express Root Port (rev 04)
0000:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
0000:00:1c.1 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3)
0000:00:1e.2 Multimedia audio controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
0000:00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
0000:00:1f.2 IDE interface: Intel Corp. 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5b60
0000:01:00.1 Display controller: ATI Technologies Inc: Unknown device 5b70
0000:04:03.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
0000:00:00.0 0600: 8086:2580 (rev 04)
0000:00:01.0 0604: 8086:2581 (rev 04)
0000:00:1c.0 0604: 8086:2660 (rev 03)
0000:00:1c.1 0604: 8086:2662 (rev 03)
0000:00:1d.0 0c03: 8086:2658 (rev 03)
0000:00:1d.1 0c03: 8086:2659 (rev 03)
0000:00:1d.2 0c03: 8086:265a (rev 03)
0000:00:1d.3 0c03: 8086:265b (rev 03)
0000:00:1d.7 0c03: 8086:265c (rev 03)
0000:00:1e.0 0604: 8086:244e (rev d3)
0000:00:1e.2 0401: 8086:266e (rev 03)
0000:00:1f.0 0601: 8086:2640 (rev 03)
0000:00:1f.1 0101: 8086:266f (rev 03)
0000:00:1f.2 0101: 8086:2651 (rev 03)
0000:00:1f.3 0c05: 8086:266a (rev 03)
0000:01:00.0 0300: 1002:5b60
0000:01:00.1 0380: 1002:5b70
0000:04:03.0 0200: 14e4:4401 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [E]
Comments/Problems:
config network had to retry at least twice for dhcp to configure it.
reboot failed after real time clock driver message
- seems to be a known problem
- added apci=off to kernel boot options to continue
xserver ati driver did not work with this ati graphics card
(but thats not an install problem ;-)
M.
--
Mark Ferguson
ClearSpeed Technology plc Tel: +44 117 3172000
3110 Great Western Court, Hunts Ground Road Fax: +44 117 3172002
Stoke Gifford, BRISTOL BS34 8HP England http://www.clearspeed.com
Reply to: