[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#288049: installation-reports: LSI MegaRAID 467 (aka Dell PERC2/DC) not detected, was detected in RC1 w/2.6 kernel



Package: installation-reports
Version: 2004-12-30 i386 netinst iso
Severity: important


Filing report per joeyh request in #debian-boot

Dell PowerEdge 6400
Dell PERC 2D/DC (aka LSI MegaRAID 467)

Controller not detected in latest nightly d-i
Controller was detected in d-i RC1

Here is lspci and lspci -n info:

0000:00:00.0 Host bridge: ServerWorks CNB20HE Host Bridge (rev 21)
0000:00:00.1 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
0000:00:00.2 Host bridge: ServerWorks CNB20HE Host Bridge
0000:00:00.3 Host bridge: ServerWorks CNB20HE Host Bridge
0000:00:04.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC (rev 7a)
0000:00:05.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
0000:00:05.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
0000:00:08.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
0000:00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 50)
0000:00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller
0000:00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 04)
0000:03:09.0 PCI bridge: Intel Corp. 80960RP [i960 RP Microprocessor/Bridge] (rev 02)
0000:03:09.1 I2O: Intel Corp. 80960RP [i960RP Microprocessor] (rev 02)
0000:03:0b.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)

0000:00:00.0 0600: 1166:0008 (rev 21)
0000:00:00.1 0600: 1166:0008 (rev 01)
0000:00:00.2 0600: 1166:0006
0000:00:00.3 0600: 1166:0006
0000:00:04.0 0300: 1002:4759 (rev 7a)
0000:00:05.0 0100: 9005:00cf (rev 01)
0000:00:05.1 0100: 9005:00cf (rev 01)
0000:00:08.0 0200: 8086:1229 (rev 08)
0000:00:0f.0 0601: 1166:0200 (rev 50)
0000:00:0f.1 0101: 1166:0211
0000:00:0f.2 0c03: 1166:0220 (rev 04)
0000:03:09.0 0604: 8086:0964 (rev 02)
0000:03:09.1 0e00: 8086:1960 (rev 02)
0000:03:0b.0 0200: 8086:1229 (rev 08)

processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 10
model name	: Pentium III (Cascades)
stepping	: 1
cpu MHz		: 699.331
cache size	: 1024 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 1395.91

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 10
model name	: Pentium III (Cascades)
stepping	: 1
cpu MHz		: 699.331
cache size	: 1024 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 1395.91

processor	: 2
vendor_id	: GenuineIntel
cpu family	: 6
model		: 10
model name	: Pentium III (Cascades)
stepping	: 1
cpu MHz		: 699.331
cache size	: 1024 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 1395.91

processor	: 3
vendor_id	: GenuineIntel
cpu family	: 6
model		: 10
model name	: Pentium III (Cascades)
stepping	: 1
cpu MHz		: 699.331
cache size	: 1024 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips	: 1395.91

        total:    used:    free:  shared: buffers:  cached:
Mem:  1058357248 589602816 468754432        0 103206912 264413184
Swap: 1003474944        0 1003474944
MemTotal:      1033552 kB
MemFree:        457768 kB
MemShared:           0 kB
Buffers:        100788 kB
Cached:         258216 kB
SwapCached:          0 kB
Active:         162816 kB
Inactive:       227288 kB
HighTotal:      131064 kB
HighFree:         2044 kB
LowTotal:       902488 kB
LowFree:        455724 kB
SwapTotal:      979956 kB
SwapFree:       979956 kB
           CPU0       CPU1       CPU2       CPU3       
  0:      33290      54626      54317      54125    IO-APIC-edge  timer
  1:         64        887       4829       2845    IO-APIC-edge  keyboard
  2:          0          0          0          0          XT-PIC  cascade
  8:          0          2          0          2    IO-APIC-edge  rtc
 14:          4          4          1          2    IO-APIC-edge  ide0
 17:         16         18          9         15   IO-APIC-level  aic7xxx
 18:         13         13          3          1   IO-APIC-level  aic7xxx
 23:       5851      17391       6733       2488   IO-APIC-level  megaraid
 26:     677291         15         23         19   IO-APIC-level  eth0
 31:          0          0          0          0   IO-APIC-level  usb-ohci
NMI:          0          0          0          0 
LOC:     196211     196222     196221     196221 
ERR:          0
MIS:          0
v2.10.3 (Release Date: Thu Apr  8 16:16:05 EDT 2004)
Controller Type: 438/466/467/471/493/518/520/531/532
Controller is not using 64-bit memory addressing
Base = f89fa000, Irq = 23, Initial Logical Drives = 2, Channels = 2
Version =1.01:1p00, DRAM = 128Mb
Controller Queue Depth = 254, Driver Queue Depth = 126
support_ext_cdb    = 0
support_random_del = 0
boot_ldrv_enabled  = 1
boot_ldrv          = 0
boot_pdrv_enabled  = 0
boot_pdrv_ch       = 0
boot_pdrv_tgt      = 0
quiescent          = 0
has_cluster        = 0

Module Parameters:
max_cmd_per_lun    = 63
max_sectors_per_io = 128

0000:00:00.0 Host bridge: ServerWorks CNB20HE Host Bridge (rev 21)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

0000:00:00.1 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 32, Cache Line Size: 0x08 (32 bytes)

0000:00:00.2 Host bridge: ServerWorks CNB20HE Host Bridge
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-

0000:00:00.3 Host bridge: ServerWorks CNB20HE Host Bridge
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-

0000:00:04.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC (rev 7a) (prog-if 00 [VGA])
	Subsystem: Dell: Unknown device 009c
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min), Cache Line Size: 0x08 (32 bytes)
	Region 0: Memory at fc000000 (32-bit, prefetchable) [size=16M]
	Region 1: I/O ports at ec00 [size=256]
	Region 2: Memory at fbeff000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [5c] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:05.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
	Subsystem: Dell: Unknown device 009c
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 0x08 (32 bytes)
	Interrupt: pin A routed to IRQ 17
	BIST result: 00
	Region 0: I/O ports at e800 [disabled] [size=256]
	Region 1: Memory at fbefe000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at fbf00000 [disabled] [size=128K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:05.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
	Subsystem: Dell: Unknown device 009c
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 0x08 (32 bytes)
	Interrupt: pin B routed to IRQ 18
	BIST result: 00
	Region 0: I/O ports at e400 [disabled] [size=256]
	Region 1: Memory at fbefd000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at fbf00000 [disabled] [size=128K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:08.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
	Subsystem: Dell PowerEdge 2550
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 0x08 (32 bytes)
	Interrupt: pin A routed to IRQ 26
	Region 0: Memory at fbefc000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at e0c0 [size=64]
	Region 2: Memory at fbd00000 (32-bit, non-prefetchable) [size=1M]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-

0000:00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 50)
	Subsystem: ServerWorks OSB4 South Bridge
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

0000:00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller (prog-if 8a [Master SecP PriP])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Region 4: I/O ports at 08b0 [size=16]

0000:00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 04) (prog-if 10 [OHCI])
	Subsystem: ServerWorks OSB4/CSB5 OHCI USB Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (20000ns max), Cache Line Size: 0x08 (32 bytes)
	Interrupt: pin A routed to IRQ 31
	Region 0: Memory at fbefb000 (32-bit, non-prefetchable) [size=4K]

0000:03:09.0 PCI bridge: Intel Corp. 80960RP [i960 RP Microprocessor/Bridge] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, Cache Line Size: 0x08 (32 bytes)
	Bus: primary=03, secondary=04, subordinate=04, sec-latency=32
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge: fff00000-000fffff
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [68] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:03:09.1 I2O: Intel Corp. 80960RP [i960RP Microprocessor] (rev 02) (prog-if 01)
	Subsystem: Dell PowerEdge Expandable RAID Controller 2/DC
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 0x08 (32 bytes)
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at fdc00000 (32-bit, prefetchable) [size=4M]
	Expansion ROM at <unassigned> [disabled] [size=32K]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:03:0b.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
	Subsystem: Intel Corp. EtherExpress PRO/100+ Server Adapter (PILA8470B)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 0x08 (32 bytes)
	Interrupt: pin A routed to IRQ 25
	Region 0: Memory at fabff000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at ccc0 [size=64]
	Region 2: Memory at faa00000 (32-bit, non-prefetchable) [size=1M]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-



-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.4.27-2-686-smp
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)



Reply to: