Bug#287587: installation-reports: MSI K8N Neo2 Platinum, install failed with SATA-devices Samsung SP1213C 120GB
Package: installation-reports
Severity: normal
an-installer-version:http://debian-amd64.alioth.debian.org/debian-installer/2004-12-26/netboot/netboot.tar.gz
uname -a: Linux aphrodite 2.6.8-9-amd64-k8 #1 Sat Dec 4 23:16:23 CET
2004 x86_64 GNU/Linux
Date: 2004-12-28
Method: network install, local intranet-tftp netboot.tar.gz, 2004-12-26
Machine: MSI K8N Neo2 Platinum (NVIDIA nForce3 chipset)
Processor: AMD Athlon(tm) 64 Processor 3500+, 2210 MHz
Memory: 1023788 kB RAM (2x Corsair CMX512-3200C2)
Root Device: IDE /dev/hda1 (Model=WDC WD800JB-00ETA0, FwRev=77.07W77,
SerialNo=WD-WCAHL5101468)
Root Size/partition table:
/dev/hda3 78005608 1339788 76665820 2% /
tmpfs 511892 0 511892 0% /dev/shm
/dev/hda1 90297 10713 74767 13% /boot
/dev 78005608 1339788 76665820 2% /.dev
none 5120 716 4404 14% /dev
Output of lspci and lspci -n:
lspci
0000:00:00.0 Host bridge: nVidia Corporation: Unknown device 00e1 (rev
a1)
0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 00e0 (rev
a2)
0000:00:01.1 SMBus: nVidia Corporation: Unknown device 00e4 (rev a1)
0000:00:02.0 USB Controller: nVidia Corporation: Unknown device
00e7 (rev a1)
0000:00:02.1 USB Controller: nVidia Corporation: Unknown device
00e7 (rev a1)
0000:00:02.2 USB Controller: nVidia Corporation: Unknown device
00e8 (rev a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation:
Unknown device 00ea (rev a1)
0000:00:08.0 IDE interface: nVidia Corporation: Unknown device
00e5 (rev a2)
0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device
00e2 (rev a2)
0000:00:0e.0 PCI bridge: nVidia Corporation: Unknown device
00ed (rev a2)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
NorthBridge
0000:01:00.0 VGA compatible controller: ATI Technologies
Inc RV350 AP [Radeon 9600]
0000:01:00.1 Display controller: ATI Technologies Inc
RV350 AP [Radeon 9600] (Secondary)
0000:02:0d.0 Ethernet controller: Realtek
Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev
10)
lspci -n
0000:00:00.0 0600: 10de:00e1 (rev a1)
0000:00:01.0 0601: 10de:00e0 (rev a2)
0000:00:01.1 0c05: 10de:00e4 (rev a1)
0000:00:02.0 0c03: 10de:00e7 (rev a1)
0000:00:02.1 0c03: 10de:00e7 (rev a1)
0000:00:02.2 0c03: 10de:00e8 (rev a2)
0000:00:06.0 0401: 10de:00ea (rev a1)
0000:00:08.0 0101: 10de:00e5 (rev a2)
0000:00:0b.0 0604: 10de:00e2 (rev a2)
0000:00:0e.0 0604: 10de:00ed (rev a2)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:00.0 0300: 1002:4150
0000:01:00.1 0380: 1002:4170
0000:02:0d.0 0200: 10ec:8169 (rev 10)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Create file systems: [O]
Mount partitions: [O]
Install base system: [E]
Install boot loader: [E]
Reboot: [E]
Comments/Problems:
- BIOS Version 1.4 (Award), 12/2004
Installation with SATA-devices Samsung SP1213C 120GB
7200U/min 8.9ms 8MB didn't work,
- tried SATA1 / SATA2 with Software-RAID
- tried SATA1 with single Installation, both extf3 or
xfs
- all installation interrupted with Segmentation
fault
- debian-amd64/pure-amd64 interrupted with
SATA1-drive in each time (segmentation fault)
- sarge-installation interrupted with
SATA1-drive in each time
- all install setting tried, acpi=force,
acpi=off, lacpi=aoff (misc bios
settings), nothing help
Solution:
- sarge netinst-rc2 was okay with
single drive SATA1
- debian-amd64/pure-amd64 was okay
with IDE-install to /dev/hda1
WD800JB-00ETA0
- support of nv-ata must be
buggy with MSI Neo2 Platinum
Debian Release: 3.1
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.8-9-amd64-k8
Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro (charmap=ISO-8859-15)
Reply to: