Package: s390-dasd Severity: normal I see a loop in s390-dasd, it asks me if I want to format device 0120, I say yet, it formats it and asks me again. Over and over. If I say no, it just asks me again. The back button has no effect. I've tried to run the dasdfmt command by hand, and it succeeds. ~ # cat /proc/dasd/devices 0120(ECKD) at ( 94: 0) is dasda : active at blocksize: 4096, 216000 blocks, 843 MB ~ # dmesg |tail dasd(eckd): /dev/dasda ( 94: 0),0120@01: volume analysis returned unformatted disk dasd: waiting for responses... dasd(eckd): /dev/dasda ( 94: 0),0120@01: (4kB blks): 864000kB at 48kB/trk compatible disk layout Partition check: /dev/dasd/0120:(nonl)/ : p1 /dev/dasd/0120:VOL1/ LX0120: dasd: waiting for responses... dasd(eckd): /dev/dasda ( 94: 0),0120@01: (4kB blks): 864000kB at 48kB/trk compatible disk layout /dev/dasd/0120:(nonl)/ : p1 /dev/dasd/0120:VOL1/ LX0120: ~ # cat /proc/subchannels Device sch. Dev Type/Model CU in use PIM PAM POM CHPIDs --------------------------------------------------------------------- 000C 0000 3505/01 2821/01 80 80 FF 00000000 00000000 0120 0001 3390/06 3990/C2 yes 80 80 FF 01000000 00000000 0A00 0002 3088/01 3088/08 yes 80 80 FF 0A000000 00000000 0A01 0003 3088/01 3088/08 yes 80 80 FF 0A000000 00000000 I'm installing in hercules, configured as follows: CPUSERIAL 002623 CPUMODEL 3090 MAINSIZE 64 CODEPAGE default XPNDSIZE 0 #CNSLPORT 3270 #HTTPPORT 8081 noauth userid password #HTTPROOT /usr/share/hercules/ NUMCPU 1 LOADPARM 0120.... OSTAILOR LINUX PANRATE SLOW ARCHMODE ESA/390 000C 3505 /home/joey/kernel.debian /home/joey/parmfile.debian /home/joey/initrd.debian autopad eof 0120 3390 /home/joey/html/d-i/state/hercules-hercules-common.img 0A00 3088 CTCI /dev/net/tun 1500 192.168.42.1 192.168.42.2 255.255.255.0 0A01 3088 CTCI /dev/net/tun 1500 192.168.42.1 192.168.42.2 255.255.255.0 My dasd file was created with the command dasdinit file 3390-1 root 200. I'm installing with the udebs from testing. -- see shy jo
Attachment:
signature.asc
Description: Digital signature