Bug#280612: installation-reports
Package: installation-reports
INSTALL REPORT
Debian-installer-version: <Fill in date and from where you got the image>
uname -a: Linux valhalla 2.6.8-1-686 #1 Thu Oct 7 03:15:25 EDT 2004 i686 GNU/Linux
Date: 10 November, 2004
Method: i386-business card, expert26 mode, network installation
Machine: Fujitsu-Siemens AMILO D-Series
Processor: Pentium4 3GHz
Memory: 512 Mb
Root Device: IDE device /dev/hda1
Root Size/partition table:
This is the df output:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda1 1372508 67816 1231463 6% /
tmpfs 258152 0 258152 0% /dev/shm
/dev/hda6 22457256 420 22456836 1% /home
/dev/hda2 12684992 111236 12573756 1% /usr
/dev/hda3 971936 46656 925280 5% /var
/dev/sda1 38448276 5973164 30522012 17% /media/usb0
the root partition is ext3, the other partitions are formatted xfs
Feel free to paste the full partition
table, with notes on which partitions are mounted where.
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS 645xx (rev 51)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS]: Unknown device 0003
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 14)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
0000:00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
0000:00:09.0 CardBus bridge: O2 Micro, Inc. OZ711M1 SmartCardBus MultiMediaBay Controller (rev 20)
0000:00:09.1 CardBus bridge: O2 Micro, Inc. OZ711M1 SmartCardBus MultiMediaBay Controller (rev 20)
0000:00:09.2 System peripheral: O2 Micro, Inc. OZ711Mx MultiMediaBay Accelerator
0000:00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8180L 802.11b MAC (rev 20)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
0000:00:00.0 0600: 1039:0648 (rev 51)
0000:00:01.0 0604: 1039:0003
0000:00:02.0 0601: 1039:0963 (rev 14)
0000:00:02.1 0c05: 1039:0016
0000:00:02.3 0c00: 1039:7007
0000:00:02.5 0101: 1039:5513
0000:00:02.6 0703: 1039:7013 (rev a0)
0000:00:02.7 0401: 1039:7012 (rev a0)
0000:00:03.0 0c03: 1039:7001 (rev 0f)
0000:00:03.1 0c03: 1039:7001 (rev 0f)
0000:00:03.2 0c03: 1039:7001 (rev 0f)
0000:00:03.3 0c03: 1039:7002
0000:00:04.0 0200: 1039:0900 (rev 91)
0000:00:09.0 0607: 1217:7114 (rev 20)
0000:00:09.1 0607: 1217:7114 (rev 20)
0000:00:09.2 0880: 1217:7110
0000:00:0b.0 0200: 10ec:8180 (rev 20)
0000:01:00.0 0300: 1002:4e50
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
During the installation process i had not problem with partioning the hard disk, but after rebooting each time i try to launch cfdisk i get this error:
FATAL ERROR: Bad logical partition 6: enlarged logical partition overlap.
Then cfdisk exit. I also had other problems with the partitioner on another computer, i could create the filesystem but the partition size were wrong.
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: