[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#279562: install report



Package: installation-reports

INSTALL REPORT

Debian-installer-version: sarge i386 businesscard
uname -a: Linux theia 2.6.8-1-386 #1 Thu Oct 7 02:21:16 EDT 2004 i586
GNU/Linux
Date: 2004/10/26 8:00pm
Method: businesscard image, burnt on CD, booted from CD
Machine: -
Processor: AMD K6-2 500MHz
Memory: 64MB
Root Device: IDE 8GB-HD Seagate ST38410A
Root Size/partition table:

Disk /dev/hda: 8622 MB, 8622931968 bytes
16 heads, 63 sectors/track, 16708 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes

   Device Boot   Start     End   Blocks   Id  System          Mountpoint
/dev/hda1   *        1   16346  8238352+  83  Linux               /
/dev/hda2        16347   16708   182448    f  W95 Ext'd (LBA)
/dev/hda5        16347   16708   182416+  82  Linux swap        none

Output of lspci and lspci -n:
0000:00:00.0 Host bridge: ALi Corporation M1541 (rev 04)
0000:00:01.0 PCI bridge: ALi Corporation M1541 PCI to AGP Controller (rev
04)
0000:00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:03.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin
IV] (rev c3)
0000:00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:00:0f.0 IDE interface: ALi Corporation M5229 IDE (rev c1)
0000:01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev
01)

0000:00:00.0 0600: 10b9:1541 (rev 04)
0000:00:01.0 0604: 10b9:5243 (rev 04)
0000:00:02.0 0c03: 10b9:5237 (rev 03)
0000:00:03.0 0680: 10b9:7101
0000:00:07.0 0601: 10b9:1533 (rev c3)
0000:00:0b.0 0200: 10ec:8139 (rev 10)
0000:00:0f.0 0101: 10b9:5229 (rev c1)
0000:01:00.0 0300: 121a:0005 (rev 01)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems: no problems up to now; hope it stays that way!  :-)


Install logs and other status info is available in
/var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.




Reply to: