Bug#279493: installation-reports
Package: installation-reports
Debian-installer-version: 29-10-2004
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc1/sarge-i386-netinst.iso
uname -a: Linux paretux 2.6.8-1-686 #1 Thu Oct 7 03:15:25 EDT 2004 i686
GNU/Linux
Date: 30-10-2004
Method: In AMD Athlon XP 1600+ with ADSL connection.
Machine: AMD Athlon XP 1600+
Processor: 1.4 GHz
Memory: 256 MB SDRAM
Root Device: IDE
Root Size/partition table: root /
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365
[KT133/KM133] (rev81)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365
[KT133/KM133 AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
South] (rev 40)
0000:00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 1d)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 1d)
0000:00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev 40)
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc.
VT82C686 AC97 Audio Controller (rev 50)
0000:00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:00:0f.0 Modem: PCTel Inc HSP MicroModem 56 (rev 02)
0000:01:00.0 VGA compatible controller: S3 Inc. ProSavage KM133 (rev 03)
0000:00:00.0 0600: 1106:0305 (rev 81)
0000:00:01.0 0604: 1106:8305
0000:00:07.0 0601: 1106:0686 (rev 40)
0000:00:07.1 0101: 1106:0571 (rev 06)
0000:00:07.2 0c03: 1106:3038 (rev 1d)
0000:00:07.3 0c03: 1106:3038 (rev 1d)
0000:00:07.4 0c05: 1106:3057 (rev 40)
0000:00:07.5 0401: 1106:3058 (rev 50)
0000:00:0e.0 0200: 10ec:8139 (rev 10)
0000:00:0f.0 0703: 134d:7892 (rev 02)
0000:01:00.0 0300: 5333:8a26 (rev 03)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [OK]
Configure network HW: [OK]
Config network: [E]
Detect CD: [OK]
Load installer modules: [OK]
Detect hard drives: [OK]
Partition hard drives: [OK]
Create file systems: [OK]
Mount partitions: [OK]
Install base system: [OK]
Install boot loader: [OK]
Reboot: [OK]
Comments/Problems:
I had to boot the CD with the option "linux26" because
with the default option, the network wasn't configured.
This CD is a great work! Congratulations!
Reply to: