Bug#274946: installation-reports
Package: installation-reports
Debian-installer-version: 1. october 2004
netinst CD image, with Debian base from http://www.debian.org/devel/debian-installer/
uname -a: Linux lp-05499 2.4.27-1-386 #1 Fri Sep 3 06:24:46 UTC 2004 i686 GNU/Linux
Date: 4. october 2004
Method: booting from CD (netinst) installing additional packages by ftp
Machine: IBM Thinkpad R32
Processor: Intel Pentium 4 mobile 1.6 MHz
Memory:256 MB
Root Device: IDE
Root Size/partition table:
proc /proc proc defaults 0 0
/dev/hda6 / ext3 defaults,errors=remount-ro 0 1
/dev/hda7 /home ext3 defaults 0 2
/dev/hda5 none swap sw 0 0
/dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
0000:00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)
0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 42)
0000:00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio Controller (rev 02)
0000:00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem Controller (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY
0000:02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
0000:02:09.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02)
0000:00:00.0 0600: 8086:1a30 (rev 04)
0000:00:01.0 0604: 8086:1a31 (rev 04)
0000:00:1d.0 0c03: 8086:2482 (rev 02)
0000:00:1d.1 0c03: 8086:2484 (rev 02)
0000:00:1d.2 0c03: 8086:2487 (rev 02)
0000:00:1e.0 0604: 8086:2448 (rev 42)
0000:00:1f.0 0601: 8086:248c (rev 02)
0000:00:1f.1 0101: 8086:248a (rev 02)
0000:00:1f.3 0c05: 8086:2483 (rev 02)
0000:00:1f.5 0401: 8086:2485 (rev 02)
0000:00:1f.6 0703: 8086:2486 (rev 02)
0000:01:00.0 0300: 1002:4c59
0000:02:08.0 0200: 8086:1031 (rev 42)
0000:02:09.0 0607: 104c:ac50 (rev 02)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Some dependency problems were discovered during package installation (Desktop system was chosen) when installing packages from base-config.
Reply to: