Bug#274563: Package: installation-reports
Package: installation-reports
Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/i386/pre-rc2/sarge-i386-businesscard.iso
uname -a: Linux dhcppc0 2.4.27-1-686 #1 Fri Sep 3 06:28:00 UTC 2004 i686 GNU/Linux
Date: 2004-10-02 16:30 CET
Method: Booted via Businesscard-ISO (burned on a CD-RW), plus network install (without proxy) via http://ftp2.de.debian.org
Machine: Desktop with Mainboard ASUS P4B266-E ACPI BIOS Revision 1003
Processor: Intel Pentium IV (Northwood) 1,8 GHz
Memory: 256 MB
Root Device: IDE (Hitachi Deskstar 60 GB Model: IC35L060AVV207-0)
Root Size/partition table:
Device Boot Start End Blocks Id System
/dev/hda1 * 1 7380 59279818+ 83 Linux
/dev/hda2 7381 7476 771120 f W95 Ext'd (LBA)
/dev/hda5 7381 7476 771088+ 82 Linux swap
Output of lspci and lspci -n:
dhcppc0:/etc/apt# lspci
0000:00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
0000:00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 05)
0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 05)
0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 05)
0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 05)
0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 05)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV200 QW [Radeon 7500]
0000:02:03.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
0000:02:04.0 USB Controller: NEC Corporation USB (rev 41)
0000:02:04.1 USB Controller: NEC Corporation USB (rev 41)
0000:02:04.2 USB Controller: NEC Corporation USB 2.0 (rev 02)
0000:02:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
dhcppc0:/etc/apt# lspci -n
0000:00:00.0 0600: 8086:1a30 (rev 04)
0000:00:01.0 0604: 8086:1a31 (rev 04)
0000:00:1e.0 0604: 8086:244e (rev 05)
0000:00:1f.0 0601: 8086:2440 (rev 05)
0000:00:1f.1 0101: 8086:244b (rev 05)
0000:00:1f.2 0c03: 8086:2442 (rev 05)
0000:00:1f.4 0c03: 8086:2444 (rev 05)
0000:01:00.0 0300: 1002:5157
0000:02:03.0 0401: 13f6:0111 (rev 10)
0000:02:04.0 0c03: 1033:0035 (rev 41)
0000:02:04.1 0c03: 1033:0035 (rev 41)
0000:02:04.2 0c03: 1033:00e0 (rev 02)
0000:02:0c.0 0200: 10ec:8139 (rev 10)
dhcppc0:/etc/apt#
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Everything worked quite well! I didn't have any problems during the installation with the pre-rc2 businesscard-ISO - I hope sarge will soon release - it is great :-)
Reply to: