Bug#273824: installation report
Package: installation-reports
INSTALL REPORT
Debian-installer-version: Weekly netinst image dated 20040923, booted using linux26
uname -a: Linux gondolin.lumag.pp.ru 2.6.8-1-386 #1 Mon Sep 13 23:29:55 EDT 2004 i686 GNU/Linux
Date: Mon Sep 27 10:30:01 MSD 2004
Method: Installation from netinst image. No network.
Machine: M/b i815 (Gigabyte GA-6OXC)
Processor: Intel Celeron Coppermine 666Mhz, overclocked to 777Mhz
Memory: 128Mb SDRAM
Root Device: IDE, /dev/hda5
Root Size/partition table:
/dev/hda1 * 1 6 48163+ 83 Linux ext3, /boot
/dev/hda2 7 12 48195 83 Linux unused
/dev/hda3 13 4865 38981722+ 5 Extended
/dev/hda5 13 73 489951 83 Linux reiserfs, /
/dev/hda6 74 243 1365493+ 83 Linux unused
/dev/hda7 244 304 489951 82 Linux swap
/dev/hda8 305 4865 36636201 8e Linux LVM LVM, see below
lvm lvdisplay:
--- Logical volume ---
LV Name /dev/gondolin/usr
VG Name gondolin
LV UUID O3iE3T-2419-oUwJ-r5Ne-PUXj-633U-6mr3PS
LV Write Access read/write
LV Status available
# open 2
LV Size 5.00 GB
Current LE 1280
Segments 1
Allocation inherit
Read ahead sectors 0
Block device 254:0
--- Logical volume ---
LV Name /dev/gondolin/homes
VG Name gondolin
LV UUID B9rhy7-rkok-kXW5-q73a-0eDw-WTnc-02GK8n
LV Write Access read/write
LV Status available
# open 2
LV Size 3.00 GB
Current LE 768
Segments 1
Allocation inherit
Read ahead sectors 0
Block device 254:1
--- Logical volume ---
LV Name /dev/gondolin/tmp
VG Name gondolin
LV UUID l8auHv-cV04-TFEw-mqTD-BQCq-jStu-a7R87A
LV Write Access read/write
LV Status available
# open 2
LV Size 300.00 MB
Current LE 75
Segments 1
Allocation inherit
Read ahead sectors 0
Block device 254:2
--- Logical volume ---
LV Name /dev/gondolin/var
VG Name gondolin
LV UUID B7RTEO-NUey-qhvx-o48V-xcPl-SB6l-0ZP1MW
LV Write Access read/write
LV Status available
# open 2
LV Size 1.00 GB
Current LE 256
Segments 1
Allocation inherit
Read ahead sectors 0
Block device 254:3
Output of lspci and lspci -n:
lspci:
0000:00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
0000:00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02)
0000:00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV6 [Vanta/Vanta LT] (rev 15)
0000:02:05.0 Serial controller: 5610 56K FaxModem 56K FaxModem Model 5610 (rev 01)
0000:02:08.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
0000:02:08.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 04)
0000:02:08.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
lspci -n:
0000:00:00.0 0600: 8086:1130 (rev 02)
0000:00:01.0 0604: 8086:1131 (rev 02)
0000:00:1e.0 0604: 8086:2418 (rev 02)
0000:00:1f.0 0601: 8086:2410 (rev 02)
0000:00:1f.1 0101: 8086:2411 (rev 02)
0000:00:1f.2 0c03: 8086:2412 (rev 02)
0000:00:1f.3 0c05: 8086:2413 (rev 02)
0000:01:00.0 0300: 10de:002c (rev 15)
0000:02:05.0 0700: 12b9:1008 (rev 01)
0000:02:08.0 0401: 1102:0004 (rev 04)
0000:02:08.1 0980: 1102:7003 (rev 04)
0000:02:08.2 0c00: 1102:4001 (rev 04)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [ ]
Config network: [ ]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
First stages (before reboot) were OK.
After reboot, I got cyrillic font in base-config, so I think
bug #258226 should be closed now.
However, during that stage of installation I experienced two problems:
1) discover removed /media/cdrom0 dir, which left me(and apt-cdrom)
with unmountable cdrom (/cdrom -> /media/cdrom -> /media/cdrom0,
which doesn't exist).
2) neither console-cyrillic package wasn't installed, nor console-data*
packages were configured to display cyrillic glyphs, so I got
weird chars in (e.g.) dselect _after_ installation.
Everything else was perfect.
--
With best wishes
Dmitry Baryshkov
Reply to: