Bug#269895: Installation Report amd64(gcc-3.2)
Package: installation-reports
Debian-installer-version: SVN revision 20757
uname -a: 2.6.8-3-amd64
Date: 20040904
Method: grabbed SVN image, built monolithic for
amd64(gcc-3.4), wrote it on a USB stick,
boot using 'expert vga=0x318'
packages grabbed from http://debian-amd64.alioth.debian.org/gcc-3.4/
Machine: Shuttle SN85G4V2
Processor: AMD64 3200+, Newcastle
Memory: 1 GB
Root Device: SATA (sil_sata)
SAMSUNG SP1614C
Root Size/partition table:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 487 3911796 83 Linux
/dev/sda2 488 1461 7823655 83 Linux
/dev/sda3 1462 1705 1959930 82 Linux swap
/dev/sda4 1706 19457 142592940 5 Extended
/dev/sda5 1706 9001 58605088+ 83 Linux
/dev/sda6 9002 19457 83987788+ 83 Linux
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4)
0000:00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6)
0000:00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4)
0000:00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
0000:00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
0000:00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2)
0000:00:05.0 Ethernet controller: nVidia Corporation nForce3 Ethernet (rev a5)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2)
0000:00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5)
0000:00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2)
0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
0000:01:07.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev 01)
0000:02:00.0 VGA compatible controller: nVidia Corporation NV28GL [Quadro4 980 XGL] (rev a1)
0000:00:00.0 0600: 10de:00d1 (rev a4)
0000:00:01.0 0601: 10de:00d0 (rev a6)
0000:00:01.1 0c05: 10de:00d4 (rev a4)
0000:00:02.0 0c03: 10de:00d7 (rev a5)
0000:00:02.1 0c03: 10de:00d7 (rev a5)
0000:00:02.2 0c03: 10de:00d8 (rev a2)
0000:00:05.0 0200: 10de:00d6 (rev a5)
0000:00:06.0 0401: 10de:00da (rev a2)
0000:00:08.0 0101: 10de:00d5 (rev a5)
0000:00:0a.0 0604: 10de:00dd (rev a2)
0000:00:0b.0 0604: 10de:00d2 (rev a4)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:06.0 0c00: 1106:3044 (rev 80)
0000:01:07.0 0104: 1095:3512 (rev 01)
0000:02:00.0 0300: 10de:0288 (rev a1)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
For "Partition disks" there was a popup saying
No partitionable media was found
The driver for my boot disk (sata_sil) was loaded.
And I could see my disk and all partitions in
/dev/disks/disk0
Regards
Harri
Reply to: