Bug#269585: Installation report
Package: installation-reports
INSTALL REPORT
Debian-installer-version: release candidate 1
uname -a: 2.6.8
Date: 2004-08-29
Method: netinst CD image and network install from ftp.debian.skynet.be
(no Proxy)
Machine: Fujitsu/Siemens Amilo M 6500
Processor: Pentium III
Memory: 256 MB
Root Device: IDE FUJITSU MHM2200AT, ATA DISK
Root Size/partition table:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda3 none swap sw 0 0
/dev/hda2 / ext3 defaults,errors=remount-ro 0 1
/dev/hdb /media/cdrom auto ro,user,noauto 0 0
/dev/fd0 /media/floppy auto rw,user,noauto,fmask=0133,dmask=0022 0 0
/dev/sda /media/usb auto rw,user,noauto,fmask=0133,dmask=0022 0 0
Output of lspci:
0000:00:00.0 Host bridge: Intel Corp. 82440MX Host Bridge (rev 01)
0000:00:00.1 Multimedia audio controller: Intel Corp. 82440MX AC'97
Audio Controller
0000:00:00.2 Modem: Intel Corp. 82440MX AC'97 Modem Controller
0000:00:02.0 VGA compatible controller: Silicon Motion, Inc. SM720
Lynx3DM (rev b1)
0000:00:07.0 ISA bridge: Intel Corp. 82440MX ISA Bridge (rev 01)
0000:00:07.1 IDE interface: Intel Corp. 82440MX EIDE Controller
0000:00:07.2 USB Controller: Intel Corp. 82440MX USB Universal Host
Controller
0000:00:07.3 Bridge: Intel Corp. 82440MX Power Management Controller
0000:00:0a.0 CardBus bridge: Texas Instruments PCI1420
0000:00:0a.1 CardBus bridge: Texas Instruments PCI1420
Output of lspci -n:
0000:00:00.0 0600: 8086:7194 (rev 01)
0000:00:00.1 0401: 8086:7195
0000:00:00.2 0703: 8086:7196
0000:00:02.0 0300: 126f:0720 (rev b1)
0000:00:07.0 0601: 8086:7198 (rev 01)
0000:00:07.1 0101: 8086:7199
0000:00:07.2 0c03: 8086:719a
0000:00:07.3 0680: 8086:719b
0000:00:0a.0 0607: 104c:ac51
0000:00:0a.1 0607: 104c:ac51
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [E]
I got a kernel panic with 2.6 flavour, so I repeated the
installation with the 2.4 flavour which processed fine.
Comments/Problems:
I was unable to load the belgian keymap during the first stage of the
installation. I used the french one instead. On this topic, there are
two different begian keymaps (be-latin1.kmap.gz and
be2-latin1.kmap.gz). Does the Debian-Installer support both of them?
Configuration of my PCMCIA ethernet card and network installation
processed very fine: congratulations :-)
Not really an installation issue:
I post-installed a kernel 2.6.8 and was faced with the TCP window
scaling/broken routers problem. Be aware of it if you are planning to
use this kernel version in the future.
Bye
Reply to: