Bug#260153: installation-reports everything went fine
Package: installation-reports
INSTALL REPORT
Debian-installer-version: official mirror (gd.tuwien.ac.at)
uname -a:Linux aptiva 2.6.6-1-686 #1 Wed May 12 14:57:57 EST 2004 i686
GNU/Linux
Date: 2004-06-30 18:46
Method: Downloaded Sarge Beta 4, 110 Mbytes ISO image
Machine: IBM Aptiva
Processor: Celeron 433 MHz
Memory: 192M
Root Device: /dev/hda
Root Size/partition table:
/dev/hda5 on / type unknown (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
/dev/hda1 on /boot type ext3 (rw)
/dev/hda3 on /var/log type ext3 (rw)
usbfs on /proc/bus/usb type usbfs (rw)
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 82810 GMCH [Graphics Memory
Controller Hub] (rev 03)
0000:00:01.0 VGA compatible controller: Intel Corp. 82810 CGC [Chipset
Graphics Controller] (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
0000:00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02)
0000:00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02)
0000:01:04.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX
[Cyclone] (rev 30)
0000:00:00.0 Class 0600: 8086:7120 (rev 03)
0000:00:01.0 Class 0300: 8086:7121 (rev 03)
0000:00:1e.0 Class 0604: 8086:2418 (rev 02)
0000:00:1f.0 Class 0601: 8086:2410 (rev 02)
0000:00:1f.1 Class 0101: 8086:2411 (rev 02)
0000:00:1f.2 Class 0c03: 8086:2412 (rev 02)
0000:01:04.0 Class 0200: 10b7:9055 (rev 30)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
user interface for LVM and partitioning confusing, I prefer manual
partitioning
LVM on root (/) not supported.
Please cater for a separate /var/log partition in the default partition
schema!
Get over kernel 2.4.* and install 2.6.* I would suggest... (I know there
are problems on misc architectures)
WISHLIST: SW-RAID within Installer, on root (/)
Reply to: