Bug#259876: Installer Report
Package: installation-reports
INSTALL REPORT
Debian-installer-version:
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/20040716/sarge-i386-netinst.iso
uname -a: Linux pitr.localdomain.bogus 2.6.6-1-k7 #1 Wed May 12 18:19:40
EST 2004 i686 GNU/Linux
Date: July 16, 2004
Method: Net Install after booting from CDROM. Installed from
mirror.peer1.net
Machine: Homemade based on GIgaByte GA-K8VNXP
Processor: AMD Athlon64 3200+ (Installed 32 bit version)
Memory: 1GB
Root Device: IDE HDD (hda)
Root Size/partition table: Disk /dev/hda: 163.9 GB, 163928604672 bytes
255 heads, 63 sectors/track, 19929 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 4278 34363003+ c W95 FAT32
(LBA) (Windows ME)
/dev/hda2 4279 6711 19543072+ 5 Extended (Ext)
/dev/hda3 6712 17654 87899647+ 83 Linux (/home)
/dev/hda4 17655 19929 18273937+ 83 Linux (SuSE
9.1 /)
/dev/hda5 4279 4522 1959898+ 82 Linux swap
/dev/hda6 4523 6711 17583111 83 Linux
(Debian testing /)
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP]
Host Bridge (rev 01)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge
[K8T800 South]
0000:00:0d.0 Multimedia video controller: Brooktree Corporation Bt878
Video Capture (rev 02)
0000:00:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 02)
0000:00:0f.0 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:10.5 Network controller: VIA Technologies, Inc. VT8237
Integrated Fast Ethernet Controller
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
[K8T800 South]
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102
[Rhine-II] (rev 78)
0000:00:14.0 FireWire (IEEE 1394): Texas Instruments TSB82AA2 IEEE-1394b
Link Layer Controller (rev 01)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: nVidia Corporation NV15DDR
[GeForce2 Ti] (rev a4)
0000:00:00.0 Class 0600: 1106:3188 (rev 01)
0000:00:01.0 Class 0604: 1106:b188
0000:00:0d.0 Class 0400: 109e:036e (rev 02)
0000:00:0d.1 Class 0480: 109e:0878 (rev 02)
0000:00:0f.0 Class 0101: 1106:0571 (rev 06)
0000:00:10.0 Class 0c03: 1106:3038 (rev 81)
0000:00:10.1 Class 0c03: 1106:3038 (rev 81)
0000:00:10.2 Class 0c03: 1106:3038 (rev 81)
0000:00:10.3 Class 0c03: 1106:3038 (rev 81)
0000:00:10.4 Class 0c03: 1106:3104 (rev 86)
0000:00:10.5 Class 0280: 1106:d104
0000:00:11.0 Class 0601: 1106:3227
0000:00:11.5 Class 0401: 1106:3059 (rev 60)
0000:00:12.0 Class 0200: 1106:3065 (rev 78)
0000:00:14.0 Class 0c00: 104c:8025 (rev 01)
0000:00:18.0 Class 0600: 1022:1100
0000:00:18.1 Class 0600: 1022:1101
0000:00:18.2 Class 0600: 1022:1102
0000:00:18.3 Class 0600: 1022:1103
0000:01:00.0 Class 0300: 10de:0151 (rev a4)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [ ]
Config network: [ ]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
I was never asked if I wanted to manually configure network settings.
It just used DHCP.
It looks much better than boot-floppies
--
Shawn D'Alimonte shawnd@mycybernet.net
Reply to: