Bug#254555: installation-reports
Package: installation-reports
INSTALL REPORT
Debian-installer-version: 15-06-2004 02:30
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/tc1/sarge-i386-netinst.iso
uname -a: Linux sarge 2.4.26-1-386
Date: 15-06-2004 03:00.00
Method: Network install from ftp.nl.debian.org
Machine: Dell PowerEdge 1600SC IDE
Processor: Pentium Xeon 2,4 Ghz
Memory: 1024 Mb
Root Device: IDE Seagate 120 Gb
Sec. Hdd: IDE Seagate 120 Gb
Root Size/partition table:
sarge:~# fdisk -l /dev/hda
Disk /dev/hda: 120.0 GB, 120000000000 bytes
255 heads, 63 sectors/track, 14589 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 4 32098+ de Dell Utility
/dev/hda2 * 5 10 48195 83 Linux
/dev/hda3 11 132 979965 83 Linux
/dev/hda4 133 14589 116125852+ 5 Extended
/dev/hda5 133 740 4883728+ 83 Linux
/dev/hda6 741 1348 4883728+ 83 Linux
/dev/hda7 1349 1470 979933+ 83 Linux
/dev/hda8 1471 2199 5855661 83 Linux
/dev/hda9 2200 2321 979933+ 82 Linux swap
/dev/hda10 2322 12047 78124063+ 83 Linux
/dev/hda11 12048 13263 9767488+ 83 Linux
/dev/hda12 13264 14589 10651063+ 83 Linux
Output of lspci:
sarge:~# lspci
0000:00:00.0 Host bridge: ServerWorks GCNB-LE Host Bridge (rev 32)
0000:00:00.1 Host bridge: ServerWorks GCNB-LE Host Bridge
0000:00:02.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02)
0000:00:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d)
0000:00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:00:0f.0 Host bridge: ServerWorks CSB5 South Bridge (rev 93)
0000:00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93)
0000:00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 05)
0000:00:0f.3 ISA bridge: ServerWorks CSB5 LPC bridge
0000:00:10.0 Host bridge: ServerWorks CIOB-X2 (rev 05)
0000:00:10.2 Host bridge: ServerWorks CIOB-X2 (rev 05)
0000:01:04.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
First install:
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
I had a little worries about the gigabit nic since i had trouble with it in the past.
No troubles found, nice job dudes
Regards,
Michel van der Klei
Reply to: