Bug#246975: Beta4 i386 netboot install OK
Package: installation-reports
INSTALL REPORT
Debian-installer-version: http://people.debian.org/~joeyh/d-i/images/daily/netboot/
dated 01-MAY-2004 (the files from
http.us.debian.org/debian/dists/testing/main/installer-i386/current/images/
date 29-APR-2004 seemed to be pre-beta4)
uname -a: Linux gustav 2.4.26-1-k7 #3 Sun Apr 18 21:43:29 EST 2004 i686 GNU/Linux
Date: 2004-05-02 13:30 CEST
Method: PXE netboot install (2.4)
getting packages from ftp2.d.debian.org via http, locally proxied
Machine: from components
Processor: K7 1200 MHz
Memory: 512 MByyte
Root Device: /dev/hda
Root Size/partition table:
Disk /dev/hda: 10.2 GB, 10260710400 bytes
255 heads, 63 sectors/track, 1247 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 510 4096543+ b W95 FAT32
/dev/hda2 511 1152 5156865 5 Extended
/dev/hda5 511 767 2064321 b W95 FAT32
/dev/hda6 1145 1152 64228+ 82 Linux swap
/dev/hda7 * 768 803 289138+ 83 Linux
/dev/hda8 804 1144 2739051 83 Linux
Partition table entries are not in disk order
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev
40)
0000:00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev
16)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev
16)
0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio
Controller (rev 50)
0000:00:09.0 Non-VGA unclassified device: LSI Logic / Symbios Logic 53c810 (rev 01)
0000:00:0c.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF/SG AGP
0000:00:00.0 Class 0600: 1106:0305 (rev 03)
0000:00:01.0 Class 0604: 1106:8305
0000:00:07.0 Class 0601: 1106:0686 (rev 40)
0000:00:07.1 Class 0101: 1106:0571 (rev 06)
0000:00:07.2 Class 0c03: 1106:3038 (rev 16)
0000:00:07.3 Class 0c03: 1106:3038 (rev 16)
0000:00:07.4 Class 0680: 1106:3057 (rev 40)
0000:00:07.5 Class 0401: 1106:3058 (rev 50)
0000:00:09.0 Class 0000: 1000:0001 (rev 01)
0000:00:0c.0 Class 0200: 8086:1229 (rev 08)
0000:01:00.0 Class 0300: 1002:5246
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
No problems up to and including reboot.
After reboot, some messages were not translated to german.
In tasksel, I choose: german environment, X, C/C++ devel.
X would benefit from some tweaks (e.g. choosing the right
keyboard layout) but was otherwise usable.
For such a standard hardware, d-i looks like ready for release.
Reply to: