Bug#239180: Partitioning Problems with detecting my old paratitions
Package: installation-reports
Debian-installer-version: Install Beta 3 downloaded from http://gluck.debian.org/cdimage/testing/sarge_d-i/i386/beta3/sarge-i386-netinst.iso
uname -a:
Date: 19.03.2004
Method: I tried to install from the Beta 3 Netinst ISO File. At boot prompt I startet only with pressing
the enter-key.
I wanted to install via Net, over my router
Machine: Asus M2400N
Processor: 1.6Ghz Centrino
Memory: 512 MB Shared Ram, only accessable about 500MB
Root Device: IDE /dev/hda1 60 GB
Root Size/partition table:
Command (m for help):
Disk /dev/hda: 60.0 GB, 60011642880 bytes
255 heads, 63 sectors/track, 7296 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 523 4200966 7 HPFS/NTFS
/dev/hda2 524 7296 54404122+ f W95 Ext'd (LBA)
/dev/hda3 2091 2092 16064+ 83 Linux
/dev/hda5 * 524 980 3670821 83 Linux
/dev/hda6 981 1633 5245191 83 Linux
/dev/hda7 1634 2090 3670821 83 Linux
/dev/hda8 2093 2158 530113+ 82 Linux swap
/dev/hda9 2159 4125 15799896 b W95 FAT32
/dev/hda10 4126 7294 25454961 83 Linux
/dev/hda11 7295 7296 16033+ 14 Hidden FAT16 <32M
Command (m for help):
Output of lspci:
this is the output from my working Debian Testing!
00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02)
00:00.1 System peripheral: Intel Corp.: Unknown device 3584 (rev 02)
00:00.3 System peripheral: Intel Corp.: Unknown device 3585 (rev 02)
00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02)
00:02.1 Display controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02)
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 03)
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 03)
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 03)
00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corp. 82801DBM Ultra ATA Storage Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem Controller (rev 03)
01:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9)
01:03.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9)
01:03.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 01)
01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:05.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
There was a problem with partioning my harddisk. My harddrive was partioned with the Acronis Bootseltor
tool, which can also partion a hardisk. Once a time I moved and resized my partions with this tool.
So the install-program didn't find any existing partition. I did not want to kill all datas on this disk, so I abourt the installation.
On my old PIII 600 I tried the Beta 3 also till I came to the partition point. On this maschine is also Acronis Bootselektor running, but theres no problem with the hardisk.
Maybe there could be any difference, because on the PIII I also boot from Acronis Bootselektor, on my Laptop (the PC this install-report belongs to) Lilo is the choice to select the operating system.
I wanted to install via net with my Orinoco Wavelan PCMCI WLAN card. Detecting this tool worked very well. ifconfig was ok, and pinging from another pc worked.
--
GPG Key: http://homepages.hs-bremen.de/~sabe/gpg/SaschaBerkenkamp.gpg
Reply to: