uname -a: Linux debby 2.4.24-1-386 # 1 Wed Feb 18 19:44:56 EST 2004 i686
Date: 01.03.2004 12:00
Method: Network install, direct connect
Machine: Fujitsu Siemens Primergy P200
Processor: 2x PIII 1GHz
Root Device: Raid Mylex
Root Size/partition table:
9GB / ext3
20GB /home ext3
Output of lspci:
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [E]
Install boot loader: [ ]
Reboot: [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Reading Package Lists...
Building Dependency Tree...
lilo kernel-doc-2.4.24 kernel-pcmcia-modules-2.4.24-1-386
The following NEW packages will be installed:
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/10.6MB of archives.
After unpacking 28.6MB of additional disk space will be used.
Selecting previously deselected package kernel-image-2.4.24-1-386.
(Reading database ... 7172 files and directories currently installed.)
Unpacking kernel-image-2.4.24-1-386 (from
Setting up kernel-image-2.4.24-1-386 (2.4.24-3) ...
You are attempting to install a kernel version that is the same as
the version you are currently running (version 2.4.24-1-386). The modules
list is quite likely to have been changed, and the modules dependency
file /lib/modules/2.4.24-1-386/modules.dep needs to be re-built. It can
not be built correctly right now, since the module list for the
running kernel are likely to be different from the kernel installed.
I am creating a new modules.dep file, but that may not be
correct. It shall be regenerated correctly at next reboot.
I repeat: you have to reboot in order for the modules file to be
created correctly. Until you reboot, it may be impossible to load
some modules. Reboot as soon as this install is finished (Do not
reboot right now, since you may not be able to boot back up until
installation is over, but boot immediately after). I can not stress
that too much. You need to reboot soon.
Please Hit return to continue. /usr/sbin/mkinitrd: constituent device
/dev/rd/disc0/part2 does not exist
Failed to create initrd image.
dpkg: error processing kernel-image-2.4.24-1-386 (--configure):
subprocess post-installation script returned error exit status 1
Errors were encountered while processing:
E: Sub-process /usr/bin/dpkg returned an error code (1)