[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#222607: (no subject)



Package: installation-reports
Version: daily-2003-11-19
Severity: normal


INSTALL REPORT

Debian-installer-version: 2003-11-19 http://www.mmweg.rwth-aachen.de/~sebastian.ley/d-i/netinst-image-i386/daily-2003-11-19/sarge-i386-netinst.iso 
uname -a: Linux dirk 2.4.22-1-386 #9 Sat Oct 4 14:30:39 EST 2003 i686 GNU/Linux
Date: Mon Dec  1 00:39:50 CST 2003
Method: network install (mirrors.kernel.org), boot from netinst CD (IDE)

Machine: Powerspec PS8420
 Gigabyte GA-8IDML motherboard
 (more details: http://dm93.org/z2001/DirkMachine)
Processor: Pentium 4
Memory: 1GB
Root Device: 30GB IDE disk
Root Size/partition table: 
Disk /dev/hdb: 30.7 GB, 30735581184 bytes
255 heads, 63 sectors/track, 3736 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
 
   Device Boot      Start         End      Blocks   Id  System
/dev/hdb1   *           1           9       72261   83  Linux
/dev/hdb2              10         140     1052257+  83  Linux
/dev/hdb3             141        3736    28884870    5  Extended
/dev/hdb5             141         271     1052226   8e  Linux LVM
/dev/hdb6             272         348      618471   8e  Linux LVM
/dev/hdb7             349         414      530113+  82  Linux swap
/dev/hdb8             415        1720    10490413+  8e  Linux LVM
/dev/hdb9            1721        2693     7815591   83  Linux
/dev/hdb10           2694        3736     8377866   83  Linux

Output of lspci:

00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 12)
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 12)
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12)
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 12)
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 12)
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 12)
01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 MX 100 DDR/200 DDR] (rev b2)
02:00.0 Communication controller: Lucent Microelectronics LT WinModem (rev 02)
02:01.0 Multimedia video controller: Brooktree Corporation Bt848 Video Capture (rev 12)
02:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:0a.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 04)

Base System Installation Checklist:

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [ ]
Create file systems:    [ ]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [ ]
Reboot:                 [E]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:

I tried to actually use the 'sid' option when choosing a mirror.
I guess I shouldn't have expected it to work, but perhaps
some text in the dialog to that effect is in order.

When I rebooted, I couldn't use my USB keyboard to "OK" the
'welcome back' dialog. I had to plug it into the PS/2 port.

I continued adding stuff after the base install that exposed
some hardware issues...

The XFree86 hardware detection *almost* worked; it figured
out I have a NEC LCD1700M+NEC, but it got the HorizSync
wrong, which resulted in skipping the 1024x768 mode
and only using 800x600. Any clues on which package that
bug is in?

Mouse configuration was a pain; I did it pretty much manually,
by copying my /etc/gpm.conf from my sid system.

Sound didn't work out-of-the-box; I discovered the sndconfig
package... it figured out how to play a sound, but esd still
wasn't working... I then remembered to update-modules
and add myself to the audio group.



Those are the problems I ran into. FYI, some more context:

I was playing with grub, LVM, and reiserfs tonight,
as well as debian-installer. They all seem to get along reasonably well:

* This machine has been running debian (sid) for a long time.
Tonight's install was on a 2nd IDE disk.

* I tested some of the components of netinst ala:
  - grab netinst.iso above
  - mount it, using losetup
  - set up tftp and dhcp
  - EtherBoot a Sony Vaio laptop.

That way, I was able to confirm that the 2003-11-19 build is a lot
closer to the Chickenrun[1] than the 9 Nov beta release, just from
the early stages of the install, without modifying my disks at all.

The instructions in
  http://wiki.debian.net/index.cgi?DebianInstallerMknbi
were pretty good; I tweaked them just a bit. (Wiki docs
are great!).

[1] from 
SP - First Look: Next-Generation Debian Installer
Contributed by: Jonathan Oxer 
http://articles.linmagau.org/modules.php?op=modload&name=Sections&file=index&req=viewarticle&artid=455

found from http://www.debian.org/News/weekly/2003/46/

* The first time I actually burned netinst.iso to CD, I got errors
from gtoaster. I tried to use the CD anyway, in case the errors were
spurious. They weren't. The CD was bad. But the debian installer
was fairly robust; it didn't lock up or crash; the diagnostics
it gave when it couldn't read files were pretty reasonable. After
5 or 6 of them, I got the hint that the CD was bad and burned
another one (using cdrecord). Then it worked much better ;-)


* I'm pleased to see LVM and reiserfs support. I started by
reading the LVM-HowTo
  http://tldp.org/HOWTO/LVM-HOWTO/ and using my existing sid
installation to set up a volume group and filesystems to use for my
new /home and /usr. I chickened out when it came to putting / on LVM,
so I didn't really use the LVM configuration installer component.  I
did this install onto 2 partitions: an ext2 /boot and reiserfs /.
Then, after the base install was done, I moved /home and /usr over to
the LVM filesystems (using tar/cpio/etc.). Seems to work now. I intend
to move /var likewise.

* I had some fun with grub too. I didn't use the grub support in the
installer; I installed grub in my sid system, and configured it to
boot from the 2nd disk (that tooks some work: grub complained that
(hd1,0) didn't exist until I got the BIOS to properly recognize the
disk. I hadn't bothered to do that when I put the disk in the
machine.)

* I like the way popularity-contest is integrated into the install,
though I'd rather send just one report a month or one a quarter
than one per week.

It took me a while to figure out how to file this report; it wasn't
until I found a bunch of bugs files against the installation-reports
package that I knew what was going on; in future release announcements
and such, please link directly to
  http://bugs.debian.org/cgi-bin/pkgreport.cgi?which=pkg&data=installation-reports&archive=no
as well as
  http://www.debian.org/doc/FAQ/ch-support.en.html#s-bugreport





-- System Information:
Debian Release: testing/unstable
Architecture: i386
Kernel: Linux dirk 2.4.22-1-386 #9 Sat Oct 4 14:30:39 EST 2003 i686
Locale: LANG=en_US.ISO-8859-1, LC_CTYPE=en_US.ISO-8859-1




Reply to: