Debian Boot fails SCSI detect (AIC7902 Relion 240)
I got a machine supplied with RedHat.
I don't want RedHat (obviously).
I have tried booting the standard and compact kernels.
No SCSI devices are detected so I cannot continue the install.
(I was planning on setting up Software Raid (md) like the below config)
The dmesg output from RedHat is provided...
A little push in the right direction would be helpful.
dmesg:
DE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
ICH3: chipset revision 2
ICH3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: SAMSUNG CD-ROM SC-152A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide-floppy driver 0.99.newide
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 65536 buckets, 512Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 283k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
aic79xx: PCI4:2:1 MEM region 0x0 unavailable. Cannot memory map device.
nvram_scb == 0xfe
SCBPTR == 0xff
Signature = BIOS
aic79xx: PCI4:2:0 MEM region 0x0 unavailable. Cannot memory map device.
nvram_scb == 0xfe
SCBPTR == 0xff
Signature = BIOS
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.0.0
<Adaptec aic7902 Ultra320 SCSI adapter>
aic7902: Ultra320 WideChannel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.0.0
<Adaptec aic7902 Ultra320 SCSI adapter>
aic7902: Ultra320 WideChannel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
Vendor: SEAGATE Model: ST318453LC Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:3:0: Tagged Queuing enabled. Depth 253
Vendor: SEAGATE Model: ST318453LC Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
Vendor: SEAGATE Model: ST318453LC Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
Vendor: SEAGATE Model: ST318453LC Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
Reply to: