Re: arm, both disk able to boot (raid1)
On 10/10/2012 11:07 AM, Björn Wetterbom wrote:
I have a raid1 setup on my ts-209 (from the original install). See my
If your raid1 setup is done, just update your fstab and run
"update-initramfs -u && flash-kernel" to update the initramfs with the
new fstab and install the initramfs to flash. I'd advice you to have a
serial console in case something goes wrong.
Thanks. I've no experience with a serial console. Tutorials on the web
seems to edit also the grub files, which aren't on this ARM install.
What should be done different on a ARM in comparison with this method
--- 8< ----
$ cat /etc/fstab
# /etc/fstab: static file system information.
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults
/dev/md0 / ext3 noatime,errors=remount-ro
/dev/md2 /home ext3 noatime
/dev/md1 none swap sw
none /proc/bus/usb usbfs defaults
--- >8 ---
On Wed, Oct 10, 2012 at 10:53 AM, rosea.grammostola
<email@example.com <mailto:firstname.lastname@example.org>> wrote:
On 10/10/2012 06:53 AM, Johnson Chetty wrote:
you need u-boot to set up the environment for the
u-boot will then load the kernel..
Thanks. Do you've pointers for how to do this?
To UNSUBSCRIBE, email to debian-arm-REQUEST@lists.__debian.org
with a subject of "unsubscribe". Trouble? Contact