[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: iconnect installer support



I grabbed a copy of the newest installer daily snapshot form wheezy

still not working, I read something that it is the debian installer

Is it possible to have a sanpshot of the squeeze installer with usb to lan driver pegass II compiled in?

here my dmesg output

BusyBox v1.18.5 (Debian 1:1.18.5-1) built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ # dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-1-kirkwood (Debian 3.0.0-1) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-4) ) #1 Mon Jul 25 07:04:14 UTC 2011 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: Marvell RD-88F6281 Reference Board
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat c042abbc, node_mem_map c0492000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65024 pages, LIFO batch:15
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyS0,115200n8 base-installer/initramfs-tools/driver-policy=most
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 251092k/251092k available, 11052k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
[    0.000000]     vmalloc : 0xd0800000 - 0xfe800000   ( 736 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .init : 0xc0008000 - 0xc002a000   ( 136 kB)
[    0.000000]       .text : 0xc002a000 - 0xc03f7eb0   (3896 kB)
[    0.000000]       .data : 0xc03f8000 - 0xc042cd10   ( 212 kB)
[    0.000000]        .bss : 0xc042cd34 - 0xc049120c   ( 402 kB)
[    0.000000] NR_IRQS:114
[ 0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
[    0.000000] Console: colour dummy device 80x30
[   17.306485] Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064)
[   17.346346] pid_max: default: 32768 minimum: 301
[   17.346483] Security Framework initialized
[   17.346506] SELinux:  Disabled at boot.
[   17.346575] Mount-cache hash table entries: 512
[   17.346963] Initializing cgroup subsys cpuacct
[   17.346991] Initializing cgroup subsys memory
[   17.347021] Initializing cgroup subsys devices
[   17.347033] Initializing cgroup subsys freezer
[   17.347044] Initializing cgroup subsys net_cls
[   17.347055] Initializing cgroup subsys blkio
[   17.347156] CPU: Testing write buffer coherency: ok
[   17.348408] devtmpfs: initialized
[   17.350242] print_constraints: dummy:
[   17.350496] NET: Registered protocol family 16
[   17.351278] Kirkwood: MV88F6281-A0, TCLK=200000000.
[   17.351294] Feroceon L2: Enabling L2
[   17.351335] Feroceon L2: Cache support initialised.
[ 17.351924] initial MPP regs: 21111111 00003311 33331100 33333333 00000333 00000000 00000000 [ 17.351950] final MPP regs: 21111111 00003311 33331100 33303333 00000333 00000000 00000000
[   17.352735] Kirkwood PCIe port 0:
[   17.352743] link up
[   17.352752] PCI: bus0 uses PCIe port 0
[   17.352905] pci 0000:00:00.0: [11ab:6281] type 0 class 0x000580
[ 17.352933] pci 0000:00:00.0: reg 10: [mem 0xf1000000-0xf10fffff 64bit pref]
[   17.352951] pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0fffffff]
[   17.352989] pci 0000:00:00.0: supports D1 D2
[   17.353035] pci 0000:00:01.0: [168c:002b] type 0 class 0x000280
[ 17.353067] pci 0000:00:01.0: reg 10: [mem 0x40000000-0x4000ffff 64bit]
[   17.353146] pci 0000:00:01.0: supports D1
[   17.353158] pci 0000:00:01.0: PME# supported from D0 D1 D3hot D3cold
[   17.353172] pci 0000:00:01.0: PME# disabled
[   17.353222] PCI: bus0: Fast back to back transfers disabled
[ 17.353493] pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit] [ 17.353518] pci 0000:00:01.0: BAR 0: set to [mem 0xe0000000-0xe000ffff 64bit] (PCI address [0xe0000000-0xe000ffff])
[   17.355245] bio: create slab <bio-0> at 0
[   17.355653] vgaarb: loaded
[   17.356179] Switching to clocksource orion_clocksource
[   17.356346] Switched to NOHz mode on CPU #0
[   17.371218] NET: Registered protocol family 2
[ 17.371442] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 17.372160] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 17.372381] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[   17.372496] TCP: Hash tables configured (established 8192 bind 8192)
[   17.372507] TCP reno registered
[   17.372519] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   17.372546] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   17.372832] NET: Registered protocol family 1
[   17.372887] PCI: CLS 32 bytes, default 32
[   17.373072] Unpacking initramfs...
[   17.740755] Freeing initrd memory: 4084K
[ 17.740772] NetWinder Floating Point Emulator V0.97 (double precision)
[   17.741378] audit: initializing netlink socket (disabled)
[   17.741419] type=2000 audit(0.420:1): initialized
[   17.747293] VFS: Disk quotas dquot_6.5.2
[ 17.747393] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 17.747512] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[   17.747895] msgmni has been set to 498
[   17.749551] alg: No test for stdrng (krng)
[ 17.749680] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[   17.749696] io scheduler noop registered
[   17.749706] io scheduler deadline registered
[   17.749756] io scheduler cfq registered (default)
[   17.749871] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
[   17.749909] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
[   17.786248] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[   17.826244] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
[   17.866244] mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
[   17.906243] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
[   17.906706] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 17.927257] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[   18.392949] console [ttyS0] enabled
[   18.397482] ONFI flash detected
[ 18.400806] NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit)
[   18.409321] Scanning device for bad blocks
[   18.430494] Bad eraseblock 292 at 0x000002480000
[   18.656707] Creating 3 MTD partitions on "orion_nand":
[   18.661876] 0x000000000000-0x000000100000 : "u-boot"
[   18.667821] 0x000000100000-0x000000300000 : "uImage"
[   18.673674] 0x000000300000-0x000020000000 : "root"
[   18.680687] mousedev: PS/2 mouse device common for all mice
[   18.686717] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
[   18.692670] i2c /dev entries driver
[   18.696442] cpuidle: using governor ladder
[   18.700698] cpuidle: using governor menu
[   18.705557] TCP cubic registered
[   18.708825] NET: Registered protocol family 17
[   18.713308] Registering the dns_resolver key type
[   18.718098] Gating clock of unused units
[   18.718109] before: 0x00dfc3dd
[   18.718117]  after: 0x00cfc1dd
[   18.718592] registered taskstats version 1
[ 18.723269] rtc-mv rtc-mv: setting system clock to 2011-09-07 21:18:47 UTC (1315430327)
[   18.731337] Initializing network drop monitor service
[   18.736660] Freeing init memory: 136K
[ 18.876009] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[   19.003966] mv643xx_eth smi: probed
[ 19.031764] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:d0:b8:0d:2d:b5 [ 19.044962] mmc0: mvsdio driver initialized, using GPIO 28 for card detection
[   19.063527] usbcore: registered new interface driver usbfs
[   19.102738] usbcore: registered new interface driver hub
[ 19.125166] mv643xx_eth_port mv643xx_eth_port.1: eth1: port 0 with MAC address 00:50:43:5a:1a:2d
[   19.145410] usbcore: registered new device driver usb
[ 19.174255] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   19.214742] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 19.241133] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[   19.306378] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[   19.329238] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 19.335265] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 19.342126] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   19.349396] usb usb1: Product: Marvell Orion EHCI
[   19.354126] usb usb1: Manufacturer: Linux 3.0.0-1-kirkwood ehci_hcd
[   19.360439] usb usb1: SerialNumber: orion-ehci.0
[   19.377384] hub 1-0:1.0: USB hub found
[   19.381172] hub 1-0:1.0: 1 port detected
[ 19.696233] usb 1-1: new high speed USB device number 2 using orion-ehci [ 19.846618] usb 1-1: New USB device found, idVendor=058f, idProduct=6254 [ 19.853356] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   19.863986] hub 1-1:1.0: USB hub found
[   19.874127] hub 1-1:1.0: 4 ports detected
[ 20.156390] usb 1-1.1: new high speed USB device number 3 using orion-ehci [ 20.288611] usb 1-1.1: New USB device found, idVendor=0951, idProduct=1653 [ 20.295522] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   20.302882] usb 1-1.1: Product: DT 100 G2
[   20.306942] usb 1-1.1: Manufacturer: Kingston
[   20.311319] usb 1-1.1: SerialNumber: 00142225A589AAC035150058
[ 20.416538] usb 1-1.3: new high speed USB device number 4 using orion-ehci [ 20.557121] usb 1-1.3: New USB device found, idVendor=17e9, idProduct=02a9 [ 20.557142] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   20.557156] usb 1-1.3: Product: LILLIPUT USB Monitor
[   20.557167] usb 1-1.3: Manufacturer: DisplayLink
[   20.557177] usb 1-1.3: SerialNumber: 87990920
[ 20.609561] udlfb: DisplayLink LILLIPUT USB Monitor - serial #87990920 [ 20.609582] udlfb: vid_17e9&pid_02a9&rev_0124 driver's dlfb_data struct at ce8b6000
[   20.609593] udlfb: console enable=0
[   20.609601] udlfb: fb_defio enable=0
[ 20.609786] udlfb: vendor descriptor length:17 data:17 5f 01 0015 05 00 01 03 00 04
[   20.609805] udlfb: DL chip limited to 700000 pixel modes
[   20.610285] udlfb: allocated 4 65024 byte urbs
[ 20.656380] usb 1-1.4: new low speed USB device number 5 using orion-ehci
[   20.690901] udlfb: 800x480 valid mode
[   20.690917] udlfb: Reallocating framebuffer. Addresses will change!
[   20.692377] udlfb: 800x480 valid mode
[   20.692388] udlfb: set_par mode 800x480
[ 20.718544] udlfb: DisplayLink USB device /dev/fb0 attached. 800x480 resolution. Using 1504K framebuffer memory
[   20.719426] usbcore: registered new interface driver udlfb
[ 20.792495] usb 1-1.4: New USB device found, idVendor=0603, idProduct=00f2 [ 20.792515] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   20.792529] usb 1-1.4: Product: USB Keyboard
[   20.792539] usb 1-1.4: Manufacturer: NOVATEK
[ 20.841433] input: NOVATEK USB Keyboard as /devices/platform/orion-ehci.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input0 [ 20.841952] generic-usb 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-orion-ehci.0-1.4/input0 [ 20.849408] input: NOVATEK USB Keyboard as /devices/platform/orion-ehci.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input1 [ 20.849924] generic-usb 0003:0603:00F2.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-orion-ehci.0-1.4/input1
[   20.850009] usbcore: registered new interface driver usbhid
[   20.850020] usbhid: USB HID core driver
[ 37.512982] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 38.735748] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 52.829104] mv643xx_eth_port mv643xx_eth_port.1: eth1: link up, 100 Mb/s, full duplex, flow control disabled [ 75.289797] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 81.695569] mv643xx_eth_port mv643xx_eth_port.1: eth1: link up, 100 Mb/s, full duplex, flow control disabled [ 85.197457] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 90.914851] mv643xx_eth_port mv643xx_eth_port.1: eth1: link up, 100 Mb/s, full duplex, flow control disabled
~ #


On Wed, 07 Sep 2011 21:03:56 +0200, Richard wrote:
Hi,

I have setup a page about the iomega connect, to install debian on it.

http://www.kroonen.eu/wiki

I can get almost everything to work only the installer is not so
nice. I'm using the installer of openrd and
the problem is when detecting the networkcard everything works, but
it forces itself to 1gb fixed.

So you need to install debian on the iomega iconnect and 1gb switch.

here the output

iconnect:~# ethtool eth0
Settings for eth0:
Supported ports: [ MII ]
Supported link modes:
Supports auto-negotiation: No
Advertised link modes:  Not reported
Advertised auto-negotiation: No
Speed: 1000Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: off
Link detected: yes

iconnect:~# dmesg

Linux version 2.6.32.21 (kelly@speedy) (gcc version 4.4.3 (Sourcery G++
MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
net eth0: port 0 with MAC address 00:d0:b8:0c:a4:b1
net eth1: port 0 with MAC address 00:50:43:5a:1a:2d
eth0: link up, 1000 Mb/s, full duplex, flow control disabled



Now I hope that there are people who can solve this, because when I
run my custom kernel, the driver of the lan works as expected, so also
100mb auto etc

root@iconnect3:~# ethtool eth0
Settings for eth0:
Supported ports: [ TP AUI BNC MII FIBRE ]
Supported link modes:   10baseT/Half 10baseT/Full
                        100baseT/Half 100baseT/Full
                        1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes:  10baseT/Half 10baseT/Full
                        100baseT/Half 100baseT/Full
                        1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 11
Transceiver: external
Auto-negotiation: on
Link detected: yes


dmesg output

mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address
00:d0:b8:0d:2d:b5
[   35.311370] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   37.064142] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up,
100 Mb/s, full duplex, flow control disabled


Could this be a problem with the 2.6.32 driver of the installer?

I also want to have an extra driver, how can I do that (I want an usb
to lan Pegausus II) to be added to the installer. How can I do that?


regards Richard


Reply to: