Re: thecus n2100 armel lenny upgrade, won't boot
* Joost Yervante Damad <firstname.lastname@example.org> [2008-08-28 19:39]:
> Begin: Mounting root file system ...
> Begin: Running /scripts/local-top ...
> Begin: Loading MD modules ...
> [ 12.660000] md: raid1 personality registered for level 1
> Success: loaded module raid1.
> Begin: Assembling all MD arrays ...
> [ 12.720000] md: md0 stopped.
> mdadm: no devices found for /dev/md0
> Failure: failed to assemble all arrays.
I saw something similar recently with md on a USB stick, and was told
to use rootdelay. But I think your situation is different in that
it's SATA and so it should work. Maybe maks will see from your logs
> Gave up waiting for root device. Common problems:
> - Boot args (cat /proc/cmdline)
> - Check rootdelay= (did the system wait long enough?)
Well, can you try to add rootdelay=10 to see if that helps?
But imho md on SATA should work without rootdelay. And it worked
before since you made an upgrade, right?