Re: Problem configuring Saned
On Sat, Dec 08, 2007 at 12:25:48AM +0100, Olivier Heinry wrote:
> I've sucessfully installed an Epson DX6050 onto my Slug. The printer
> side works in a perfect manner with Cups since i downgraded gs-esp to
> the sarge version.
> Now, i'd like to have the scanner work, I did the same step as described
> here, http://www.nslu2-linux.org/wiki/HowTo/SetUpAScannerServerWithSANE
> Sane-find-scanner says:
> found USB scanner (vendor=0x04b8, product=0x082e) at libusb:003:003
> scanimage -L returns:
Did you do that as root or a regular user? It might only work as root
unless you tell udev that the device should have access to users in the
scanner group. And of course your user would have to be a member of the
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).
> I've edited the /etc/sane.d/epson.conf as follows:
> usb 0x4b8 0x82e
> Same setup works on my i686 Laptop running lenny.
> Any help welcome :-)
Well certainly the sane page says the DX6000 with the same usb id should
work with the epson backend (as of version 0.2.42).