Re: sensors
On Fri, Apr 25, 2008 at 08:06:40AM -0400, Lennart Sorensen wrote:
> Oh darn, I better go tell the hardware guys here that the chip we are
> using in our product isn't working. :) We use the W83627HF-AW on
> purpose because it works and is supported.
>
> The chip is supported perfectly, as long as you get the resistor values
> used on each voltage input and which voltage each input is supposed to
> have.
>
> lm-sensors is irrelevant since the driver is actually part of the 2.6
> kernel. lm-sensors just provides the user space tools to easily access
> the data from the driver (although you can get it all through /sys as
> well if you fell like it).
It might be possible if you have a magnifying glass to find the values
of the resistors close to the 83627, in which case it might be possible
to guess what the values should be in sensors.conf.
--
Len Sorensen
Reply to:
- References:
- Re: sensors
- From: Francesco Pietra <chiendarret@yahoo.com>
- Re: sensors
- From: lsorense@csclub.uwaterloo.ca (Lennart Sorensen)