hp dx5150 install successful
Hi,
I've recently bought a hp dx5150, and I am trying to get
it up and running the amd64 port.
d-i netinst CD with 2.6.12 from http://tinyplanet.ca/~lsorense/amd64
worked, except for
1. it booted in text mode, so I couldn't see anything Japanese, so
had to install in English
2. did not autodetect sata_sil, I modprobe'd it manually in VT2.
X seems a bit shakey, so I will probably need to explore a bit more.
regards,
junichi
cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 31
model name : AMD Athlon(tm) 64 Processor 3500+
stepping : 0
cpu MHz : 2193.698
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow lahf_lm
bogomips : 4308.99
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp
lspci:
0000:00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
0000:00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f
0000:00:05.0 PCI bridge: ATI Technologies Inc: Unknown device 5a37
0000:00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller
0000:00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
0000:00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
0000:00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
0000:00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 10)
0000:00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI
0000:00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
0000:00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
0000:00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 01)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
0000:01:05.0 VGA compatible controller: ATI Technologies Inc RS480 [Radeon Xpress 200G Series]
0000:01:05.1 Display controller: ATI Technologies Inc: Unknown device 5854
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 20)
lspci-n:
0000:00:00.0 0600: 1002:5950 (rev 01)
0000:00:01.0 0604: 1002:5a3f
0000:00:05.0 0604: 1002:5a37
0000:00:12.0 0101: 1002:4379
0000:00:13.0 0c03: 1002:4374
0000:00:13.1 0c03: 1002:4375
0000:00:13.2 0c03: 1002:4373
0000:00:14.0 0c05: 1002:4372 (rev 10)
0000:00:14.1 0101: 1002:4376
0000:00:14.3 0601: 1002:4377
0000:00:14.4 0604: 1002:4371
0000:00:14.5 0401: 1002:4370 (rev 01)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:05.0 0300: 1002:5954
0000:01:05.1 0380: 1002:5854
0000:02:00.0 0200: 14e4:1677 (rev 20)
meminfo:
MemTotal: 961684 kB
MemFree: 843340 kB
Buffers: 22940 kB
Cached: 63176 kB
SwapCached: 0 kB
Active: 61920 kB
Inactive: 36120 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 961684 kB
LowFree: 843340 kB
SwapTotal: 2811332 kB
SwapFree: 2811332 kB
Dirty: 192 kB
Writeback: 0 kB
Mapped: 17048 kB
Slab: 12120 kB
CommitLimit: 3292172 kB
Committed_AS: 26408 kB
PageTables: 840 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 1624 kB
VmallocChunk: 34359736723 kB
dmesg:
Bootdata ok (command line is root=/dev/sda1 ro )
Linux version 2.6.12-1-amd64-generic (buildd@athlon.lowpingbastards.de) (gcc version 4.0.2 20050806 (prerelease) (Debian 4.0.1-4)) #1 Thu Aug 18 02:39:46 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS)
BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
ACPI: RSDP (v000 HP ) @ 0x00000000000f8600
ACPI: RSDT (v001 HP AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef3040
ACPI: FADT (v002 HP AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef30c0
ACPI: ASF! (v016 HP AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef64c0
ACPI: MCFG (v001 HP AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef6580
ACPI: MADT (v001 HP AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003bef6400
ACPI: DSDT (v001 HP AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
On node 0 totalpages: 245488
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 241392 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 3bf00000 (gap: 3bf00000:a4100000)
Checking aperture...
CPU 0: aperture @ 6426000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
Built 1 zonelists
Kernel command line: root=/dev/sda1 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 2193.698 MHz processor.
time.c: Using PIT/TSC based timekeeping.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 961012k/981952k available (1857k kernel code, 20028k reserved, 1017k data, 148k init)
Calibrating delay loop... 4308.99 BogoMIPS (lpj=2154496)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: AMD Athlon(tm) 64 Processor 3500+ stepping 00
Using local APIC timer interrupts.
Detected 12.464 MHz APIC timer.
testing NMI watchdog ... OK.
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 3 of device 0000:00:00.0
PCI: Cannot allocate resource region 0 of device 0000:02:00.0
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
PCI-DMA: Disabling IOMMU.
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:00' and the driver 'system'
pnp: 00:00: ioport range 0x228-0x22f has been reserved
pnp: 00:00: ioport range 0x40b-0x40b has been reserved
pnp: 00:00: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:00: ioport range 0xc00-0xc01 has been reserved
pnp: 00:00: ioport range 0xc14-0xc14 has been reserved
pnp: 00:00: ioport range 0xc50-0xc52 has been reserved
pnp: 00:00: ioport range 0xc6c-0xc6d has been reserved
pnp: 00:00: ioport range 0xc6f-0xc6f has been reserved
pnp: match found with the PnP device '00:05' and the driver 'system'
pnp: match found with the PnP device '00:09' and the driver 'system'
pnp: match found with the PnP device '00:0a' and the driver 'system'
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1126164059.147:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
PCI: 0000:00:05.0 has unsupported PM cap regs version (3)
PCI: Setting latency timer of device 0000:00:05.0 to 64
pcie_portdrv_probe->Dev[5a37:1002] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Linux agpgart interface v0.101 (c) Dave Jones
pnp: the driver 'i8042 kbd' has been registered
pnp: the driver 'i8042 aux' has been registered
pnp: the driver 'i8042 kbd' has been unregistered
pnp: the driver 'i8042 aux' has been unregistered
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:07' and the driver 'serial'
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI wakeup devices:
PCI0 USB0 USB1 USB2 AUDO P2P MAC UAR1
ACPI: (supports S0 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 1464KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
VFS: Mounted root (cramfs filesystem) readonly.
input: AT Translated Set 2 keyboard on isa0060/serio0
Freeing unused kernel memory: 148k freed
NET: Registered protocol family 1
SCSI subsystem initialized
libata version 1.11 loaded.
sata_sil version 0.9
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
ata1: SATA max UDMA/100 cmd 0xFFFFC20000002080 ctl 0xFFFFC2000000208A bmdma 0xFFFFC20000002000 irq 23
ata2: SATA max UDMA/100 cmd 0xFFFFC200000020C0 ctl 0xFFFFC200000020CA bmdma 0xFFFFC20000002008 irq 23
ata1: dev 0 cfg 49:2f00 82:7869 83:7f09 84:4633 85:7869 86:3e01 87:4623 88:203f
ata1: dev 0 ATA, max UDMA/100, 488397168 sectors: lba48
ata1: dev 0 configured for UDMA/100
scsi0 : sata_sil
ata2: no device found (phy stat 00000000)
scsi1 : sata_sil
Vendor: ATA Model: Maxtor 7L250S0 Rev: BANC
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0: p1 p2 < p5 p6 > p3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: sda1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 580610
ext3_orphan_cleanup: deleting unreferenced inode 693578
ext3_orphan_cleanup: deleting unreferenced inode 306494
ext3_orphan_cleanup: deleting unreferenced inode 354877
ext3_orphan_cleanup: deleting unreferenced inode 354833
ext3_orphan_cleanup: deleting unreferenced inode 354839
ext3_orphan_cleanup: deleting unreferenced inode 354841
ext3_orphan_cleanup: deleting unreferenced inode 354844
ext3_orphan_cleanup: deleting unreferenced inode 354845
ext3_orphan_cleanup: deleting unreferenced inode 354847
ext3_orphan_cleanup: deleting unreferenced inode 354849
EXT3-fs: sda1: 11 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2811332k swap on /dev/sda5. Priority:-1 extents:1
EXT3 FS on sda1, internal journal
Probing IDE interface ide0...
hda: HL-DT-STDVDRRW GWA-4166B, ATAPI CD/DVD-ROM drive
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device
scsi2 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: HL-DT-ST Model: DVDRRW GWA-4166B Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 5
Real Time Clock Driver v1.12
Generic RTC Driver v1.07
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
tg3.c:v3.31 (June 8, 2005)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Tigon3 [partno(BCM95751) rev 4200 PHY(5750)] (PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:13:d3:4f:52:a2
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: PCI device 1002:4374 (ATI Technologies Inc)
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02e000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: PCI device 1002:4375 (ATI Technologies Inc)
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02d000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: PCI device 1002:4373 (ATI Technologies Inc)
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02c000
ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ATIIXP: port 0x01f0 already claimed by ide0
ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide1...
ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
input: PC Speaker
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:08' and the driver 'parport_pc'
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff8039a820(lo)
IPv6 over IPv4 tunneling driver
[drm] Initialized drm 1.0.0 20040925
Linux video capture interface: v1.00
eth0: no IPv6 routers present
Reply to: