Re: [dvd+rw-tools] "not an MMC unit", Philips PBDV1640P B3.2 and B2.5 via USB2
Upgrading from kernel 2.6.9 to 2.6.10 seems to have fixed the problem.
/dev/null
On Fri, Jan 28, 2005 at 07:54:30PM +0100, /dev/null wrote:
> Hello.
> I have just purchased a Philips DVD writer which identifies
> itself as "PBDV1640P" that growisofs reports as non MMC-compliant.
>
> Since this DVD writer is a recent product, this seems strange.
>
> Furthermore, the kernel says it is "sr0: scsi3-mmc drive: 40x/40x writer
> cd/rw xa/form2 cdda tray".
>
> I use the device via an IDE-to-USB2 external case. I don't know whether
> that is relevant.
>
> # growisofs -Z /dev/sr0 -R -J /my/files
> :-( not an MMC unit!
>
> (/dev/sr0 is a symlink to /dev/scd0)
>
> When I plug the device into the USB port the kernel logs this:
> Jan 28 17:28:10 sputnik kernel: usb 1-4: new high speed USB device using address 4
> Jan 28 17:28:10 sputnik kernel: scsi1 : SCSI emulation for USB Mass Storage devices
> Jan 28 17:28:11 sputnik kernel: Vendor: PHILIPS Model: PBDV1640P Rev: B3.2
> Jan 28 17:28:11 sputnik kernel: Type: CD-ROM ANSI SCSI revision: 02
> Jan 28 17:28:11 sputnik kernel: USB Mass Storage device found at 4
> Jan 28 17:28:13 sputnik kernel: sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
> Jan 28 17:28:13 sputnik kernel: Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>
> This problem happened with the older firmware release B2.5 as well.
>
> I don't think it matters, but the device burns CDs correctly (via cdrecord).
>
> Am I getting something wrong?
>
> TIA,
> /dev/null
Reply to: