Re: trouble burning DVD+R on a Pioneer drive
On Sat, Jan 22, 2005 at 09:45:22AM -0500, Bill Davidsen wrote:
> Felix Breuer wrote:
> >Hello!
> >
> >I am having trouble buring a DVD+R on a Pioneer drive. Doing
> >
> > ./growisofs -use-the-force-luke=dao -Z /dev/sr0=/mnt/data/f.iso
> >
> >I get
> >
> >...
> >3866591232/3870259200 (99.9%) @1.6x, remaining 0:01
> >builtin_dd: 1889776*2KB out @ average 1.5x1385KBps
> >/dev/sr0: flushing cache
> >/dev/sr0: closing track
> >/dev/sr0: closing disc
> >:-[ CLOSE SESSION failed with SK=2h/ASC=04h/ACQ=07h]: Resource temporarily
> >unavailable
> >/dev/sr0: reloading tray
> >
> >Before I fried several media by using variations of the command line,
> >including automatic generation of the iso image. Afterwards
> >
> > ./dvd+rw-mediainfo /dev/sr0
> >
> >shows:
> >
> >INQUIRY: [PIONEER ][DVD-RW DVR-K14L][1.00]
> >GET [CURRENT] CONFIGURATION:
> >Mounted Media: 1Bh, DVD+R
> >Current Write Speed: 4.0x1385=5540KB/s
> >Write Speed #0: 4.0x1385=5540KB/s
> >Write Speed #1: 2.4x1385=3324KB/s
> >Speed Descriptor#0: 00/2295103 R@1.0x1385=1385KB/s W@4.0x1385=5540KB/s
> >Speed Descriptor#1: 00/2295103 R@1.0x1385=1385KB/s W@2.4x1385=3324KB/s
> >READ DVD STRUCTURE[#0h]:
> >Media Book Type: A1h, DVD+R book [revision 1]
> >Media ID: RITEK/R02
> >Legacy lead-out at: 2295104*2KB=4700372992
> >READ DISC INFORMATION:
> >Disc status: appendable
> >Number of Sessions: 1
> >State of Last Session: incomplete
> >"Next" Track: 1
> >Number of Tracks: 2
> >READ TRACK INFORMATION[#1]:
> >Track State: partial/complete
> >Track Start Address: 0*2KB
> >Free Blocks: 0*2KB
> >Track Size: 1889776*2KB
> >READ TRACK INFORMATION[#2]:
> >Track State: blank
> >Track Start Address: 1889792*2KB
> >Next Writable Address: 1889792*2KB
> >Free Blocks: 405312*2KB
> >Track Size: 405312*2KB
> >READ CAPACITY: 1*2048=2048
> >
I am running Rubyx Linux ( Linux Kernel version 2.6.10 ), I have
cdrecord 2.01 installed and I am trying dvd+rw-tools-5.21.4.10.8.
I am using a Bullman Notebook with a Intel Pentium M (Dothan) processor,
1 GB of RAM and 2 GB swap space. The output of lspci is as follows:
00:00.0 Host bridge: Intel Corp.: Unknown device 3340 (rev 21)
00:01.0 PCI bridge: Intel Corp.: Unknown device 3341 (rev 21)
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 03)
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 03)
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 03)
00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corp.: Unknown device 24cc (rev 03)
00:1f.1 IDE interface: Intel Corp.: Unknown device 24ca (rev 03)
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio
(rev 03)
00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device
4e50
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169
(rev 10)
02:02.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21
IEEE-1394a-2000 Controller (PHY/Link)
02:03.0 Network controller: Intel Corp.: Unknown device 4220 (rev 05)
02:09.0 CardBus bridge: Texas Instruments: Unknown device ac54 (rev 01)
02:09.1 CardBus bridge: Texas Instruments: Unknown device ac54 (rev 01)
02:09.2 System peripheral: Texas Instruments: Unknown device 8201 (rev
01)
I am using the ide-scsi kernel module (built into the kernel) to run my
dvd burner.
If you require any more information, I will be happy to provide it.
Please tell me what exactly you want to know.
Reply to: