Bug#949021: xserver-xorg-video-intel: i915 Intel Iris Plus G7 (rev 07) hang & reset under load
Package: xserver-xorg-video-intel
Version: 2:2.99.917+git20190815-1
Severity: important
Tags: upstream
Under GPU load, X hangs, then resets; after this reset, the system is responsive but hardly workable (massive input lag). A reboot is needed.
Dmesg shows that i915 hangs, then resets (causing steam to segfault, in this case):
[ 706.762555] perf: interrupt took too long (2524 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[ 878.147587] perf: interrupt took too long (3241 > 3155), lowering kernel.perf_event_max_sample_rate to 61500
[ 1091.099151] perf: interrupt took too long (4106 > 4051), lowering kernel.perf_event_max_sample_rate to 48500
[ 1325.609741] perf: interrupt took too long (5182 > 5132), lowering kernel.perf_event_max_sample_rate to 38500
[ 1602.725312] perf: interrupt took too long (6736 > 6477), lowering kernel.perf_event_max_sample_rate to 29500
[ 1612.531293] perf: interrupt took too long (8769 > 8420), lowering kernel.perf_event_max_sample_rate to 22750
[ 1612.916769] Asynchronous wait on fence i915:cinnamon[1250]:1643a timed out (hint:intel_atomic_commit_ready+0x0/0x50 [i915])
[ 1613.840431] i915 0000:00:02.0: Resetting rcs0 for preemption time out
[ 1616.132812] i915 0000:00:02.0: GPU HANG: ecode 11:1:0x86d7fffd, in cinnamon [1250], stopped heartbeat on rcs0
[ 1616.132872] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[ 1616.132873] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[ 1616.132873] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[ 1616.132873] The GPU crash dump is required to analyze GPU hangs, so please always attach it.
[ 1616.132899] GPU crash dump saved to /sys/class/drm/card0/error
[ 1616.237695] i915 0000:00:02.0: Resetting rcs0 for stopped heartbeat on rcs0
[ 1616.240203] i915 0000:00:02.0: Resetting rcs0 for preemption time out
[ 1616.246717] i915 0000:00:02.0: Resetting chip for stopped heartbeat on rcs0
[ 1616.449034] i915 0000:00:02.0: Failed to reset chip
[ 1619.235971] perf: interrupt took too long (12434 > 10961), lowering kernel.perf_event_max_sample_rate to 16000
[ 1624.484008] broken atomic modeset userspace detected, disabling atomic
[ 1626.701976] show_signal_msg: 15 callbacks suppressed
[ 1626.702056] steam[1992]: segfault at 17 ip 00000000ea71a81f sp 00000000ff96d270 error 6 in steamclient.so[ea281000+190a000]
[ 1626.702196] Code: 47 14 89 44 24 2c 89 41 08 8d 04 1d b4 30 00 00 e8 b6 01 c9 ff 89 c6 8b 00 85 c0 0f 84 6a 01 00 00 25 ff ff ff 1f 89 c5 31 c0 <f0> 0f b1 2f 85 c0 89 c1 89 c2 0f 84 88 00 00 00 25 ff ff ff 1f 39
[ 1626.984687] steam[1992]: segfault at 17 ip 00000000ea71a81f sp 00000000ff96d270 error 6 in steamclient.so[ea281000+190a000]
[ 1626.985066] Code: 47 14 89 44 24 2c 89 41 08 8d 04 1d b4 30 00 00 e8 b6 01 c9 ff 89 c6 8b 00 85 c0 0f 84 6a 01 00 00 25 ff ff ff 1f 89 c5 31 c0 <f0> 0f b1 2f 85 c0 89 c1 89 c2 0f 84 88 00 00 00 25 ff ff ff 1f 39
[ 1635.525918] perf: interrupt took too long (15684 > 15542), lowering kernel.perf_event_max_sample_rate to 12750
[ 1784.579838] perf: interrupt took too long (22575 > 19605), lowering kernel.perf_event_max_sample_rate to 8750
This bug is reported upstream at https://gitlab.freedesktop.org/mesa/mesa/issues/2352.
-- Package-specific info:
/etc/X11/X does not exist.
/etc/X11/X is not a symlink.
/etc/X11/X is not executable.
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Iris Plus Graphics G7 [8086:8a52] (rev 07)
/etc/X11/xorg.conf does not exist.
Contents of /etc/X11/xorg.conf.d:
---------------------------------
total 0
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 5.5.0-rc5-amd64 (debian-kernel@lists.debian.org) (gcc version 9.2.1 20200104 (Debian 9.2.1-22)) #1 SMP Debian 5.5~rc5-1~exp1 (2020-01-06)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 35954 Jan 16 08:17 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 13.220]
X.Org X Server 1.20.7
X Protocol Version 11, Revision 0
[ 13.220] Build Operating System: Linux 4.19.0-6-amd64 x86_64 Debian
[ 13.220] Current Operating System: Linux Nesbitt 5.5.0-rc5-amd64 #1 SMP Debian 5.5~rc5-1~exp1 (2020-01-06) x86_64
[ 13.220] Kernel command line: BOOT_IMAGE=/vmlinuz-5.5.0-rc5-amd64 root=/dev/mapper/NESBITT-ROOT ro quiet
[ 13.220] Build Date: 14 January 2020 10:13:49AM
[ 13.220] xorg-server 2:1.20.7-2 (https://www.debian.org/support)
[ 13.220] Current version of pixman: 0.36.0
[ 13.220] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.220] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.220] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 16 08:17:03 2020
[ 13.221] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.221] (==) No Layout section. Using the first Screen section.
[ 13.221] (==) No screen section available. Using defaults.
[ 13.221] (**) |-->Screen "Default Screen Section" (0)
[ 13.221] (**) | |-->Monitor "<default monitor>"
[ 13.222] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 13.222] (==) Automatically adding devices
[ 13.222] (==) Automatically enabling devices
[ 13.222] (==) Automatically adding GPU devices
[ 13.222] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 13.224] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/cyrillic,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 13.224] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.224] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 13.224] (II) Loader magic: 0x5622ddd84e40
[ 13.224] (II) Module ABI versions:
[ 13.224] X.Org ANSI C Emulation: 0.4
[ 13.224] X.Org Video Driver: 24.1
[ 13.224] X.Org XInput driver : 24.1
[ 13.224] X.Org Server Extension : 10.0
[ 13.224] (++) using VT number 7
[ 13.224] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 13.225] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.231] (--) PCI:*(0@0:2:0) 8086:8a52:17aa:3801 rev 7, Mem @ 0x601c000000/16777216, 0x4000000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[ 13.231] (II) LoadModule: "glx"
[ 13.231] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.235] (II) Module glx: vendor="X.Org Foundation"
[ 13.235] compiled for 1.20.7, module version = 1.0.0
[ 13.235] ABI class: X.Org Server Extension, version 10.0
[ 13.235] (==) Matched modesetting as autoconfigured driver 0
[ 13.235] (==) Matched fbdev as autoconfigured driver 1
[ 13.235] (==) Matched vesa as autoconfigured driver 2
[ 13.235] (==) Assigned the driver to the xf86ConfigLayout
[ 13.235] (II) LoadModule: "modesetting"
[ 13.235] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 13.235] (II) Module modesetting: vendor="X.Org Foundation"
[ 13.235] compiled for 1.20.7, module version = 1.20.7
[ 13.235] Module class: X.Org Video Driver
[ 13.235] ABI class: X.Org Video Driver, version 24.1
[ 13.235] (II) LoadModule: "fbdev"
[ 13.235] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 13.235] (II) Module fbdev: vendor="X.Org Foundation"
[ 13.235] compiled for 1.20.0, module version = 0.5.0
[ 13.235] Module class: X.Org Video Driver
[ 13.235] ABI class: X.Org Video Driver, version 24.0
[ 13.235] (II) LoadModule: "vesa"
[ 13.236] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 13.236] (II) Module vesa: vendor="X.Org Foundation"
[ 13.236] compiled for 1.20.4, module version = 2.4.0
[ 13.236] Module class: X.Org Video Driver
[ 13.236] ABI class: X.Org Video Driver, version 24.0
[ 13.236] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 13.236] (II) FBDEV: driver for framebuffer: fbdev
[ 13.236] (II) VESA: driver for VESA chipsets: vesa
[ 13.263] (II) modeset(0): using drv /dev/dri/card0
[ 13.263] (WW) Falling back to old probe method for fbdev
[ 13.263] (II) Loading sub module "fbdevhw"
[ 13.263] (II) LoadModule: "fbdevhw"
[ 13.263] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 13.264] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 13.264] compiled for 1.20.7, module version = 0.0.2
[ 13.264] ABI class: X.Org Video Driver, version 24.1
[ 13.264] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.264] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 13.264] (==) modeset(0): RGB weight 888
[ 13.264] (==) modeset(0): Default visual is TrueColor
[ 13.264] (II) Loading sub module "glamoregl"
[ 13.264] (II) LoadModule: "glamoregl"
[ 13.264] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 13.268] (II) Module glamoregl: vendor="X.Org Foundation"
[ 13.268] compiled for 1.20.7, module version = 1.0.1
[ 13.268] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.296] (II) modeset(0): glamor X acceleration enabled on Mesa DRI Intel(R) Iris(R) Plus Graphics (Ice Lake 8x8 GT2)
[ 13.296] (II) modeset(0): glamor initialized
[ 13.297] (II) modeset(0): Output eDP-1 has no monitor section
[ 13.297] (II) modeset(0): Output DP-1 has no monitor section
[ 13.297] (II) modeset(0): Output DP-2 has no monitor section
[ 13.297] (II) modeset(0): Output DP-3 has no monitor section
[ 13.299] (II) modeset(0): EDID for output eDP-1
[ 13.299] (II) modeset(0): Manufacturer: BOE Model: 821 Serial#: 0
[ 13.299] (II) modeset(0): Year: 2018 Week: 1
[ 13.299] (II) modeset(0): EDID Version: 1.4
[ 13.299] (II) modeset(0): Digital Display Input
[ 13.299] (II) modeset(0): 10 bits per channel
[ 13.299] (II) modeset(0): Digital interface is DisplayPort
[ 13.299] (II) modeset(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 13.299] (II) modeset(0): Gamma: 2.20
[ 13.299] (II) modeset(0): No DPMS capabilities specified
[ 13.299] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 13.299] (II) modeset(0): First detailed timing is preferred mode
[ 13.299] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 13.299] (II) modeset(0): Display is continuous-frequency
[ 13.299] (II) modeset(0): redX: 0.667 redY: 0.331 greenX: 0.270 greenY: 0.661
[ 13.299] (II) modeset(0): blueX: 0.142 blueY: 0.062 whiteX: 0.312 whiteY: 0.328
[ 13.299] (II) modeset(0): Manufacturer's mask: 0
[ 13.299] (II) modeset(0): Supported detailed timing:
[ 13.299] (II) modeset(0): clock: 533.3 MHz Image Size: 309 x 174 mm
[ 13.299] (II) modeset(0): h_active: 3840 h_sync: 3888 h_sync_end 3920 h_blank_end 4000 h_border: 0
[ 13.299] (II) modeset(0): v_active: 2160 v_sync: 2163 v_sync_end 2168 v_blanking: 2222 v_border: 0
[ 13.299] (II) modeset(0): Unknown vendor-specific block 0
[ 13.299] (II) modeset(0): BOE HF
[ 13.299] (II) modeset(0): NV140QUM-N54
[ 13.299] (II) modeset(0): Number of EDID sections to follow: 1
[ 13.299] (II) modeset(0): EDID (in hex):
[ 13.299] (II) modeset(0): 00ffffffffffff0009e5210800000000
[ 13.299] (II) modeset(0): 011c0104b51f117803f170aa5445a924
[ 13.299] (II) modeset(0): 0f505400000001010101010101010101
[ 13.299] (II) modeset(0): 01010101010150d000a0f0703e803020
[ 13.299] (II) modeset(0): 350035ae1000001a0000000000000000
[ 13.299] (II) modeset(0): 0000000000000000001a000000fe0042
[ 13.299] (II) modeset(0): 4f452048460a202020202020000000fe
[ 13.299] (II) modeset(0): 004e5631343051554d2d4e35340a014a
[ 13.299] (II) modeset(0): 02030f00e3058000e60605016a6a2400
[ 13.299] (II) modeset(0): 00000000000000000000000000000000
[ 13.299] (II) modeset(0): 00000000000000000000000000000000
[ 13.299] (II) modeset(0): 00000000000000000000000000000000
[ 13.299] (II) modeset(0): 00000000000000000000000000000000
[ 13.299] (II) modeset(0): 00000000000000000000000000000000
[ 13.299] (II) modeset(0): 00000000000000000000000000000000
[ 13.299] (II) modeset(0): 0000000000000000000000000000009a
[ 13.299] (II) modeset(0): Printing probed modes for output eDP-1
[ 13.299] (II) modeset(0): Modeline "3840x2160"x60.0 533.28 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[ 13.299] (II) modeset(0): EDID for output DP-1
[ 13.299] (II) modeset(0): EDID for output DP-2
[ 13.299] (II) modeset(0): EDID for output DP-3
[ 13.299] (II) modeset(0): Output eDP-1 connected
[ 13.299] (II) modeset(0): Output DP-1 disconnected
[ 13.299] (II) modeset(0): Output DP-2 disconnected
[ 13.299] (II) modeset(0): Output DP-3 disconnected
[ 13.299] (II) modeset(0): Using exact sizes for initial modes
[ 13.299] (II) modeset(0): Output eDP-1 using initial mode 3840x2160 +0+0
[ 13.299] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.299] (==) modeset(0): DPI set to (96, 96)
[ 13.299] (II) Loading sub module "fb"
[ 13.299] (II) LoadModule: "fb"
[ 13.299] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.300] (II) Module fb: vendor="X.Org Foundation"
[ 13.300] compiled for 1.20.7, module version = 1.0.0
[ 13.300] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.300] (II) UnloadModule: "fbdev"
[ 13.300] (II) Unloading fbdev
[ 13.300] (II) UnloadSubModule: "fbdevhw"
[ 13.300] (II) Unloading fbdevhw
[ 13.300] (II) UnloadModule: "vesa"
[ 13.300] (II) Unloading vesa
[ 13.307] (==) modeset(0): Backing store enabled
[ 13.307] (==) modeset(0): Silken mouse enabled
[ 13.380] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 13.380] (==) modeset(0): DPMS enabled
[ 13.381] (II) modeset(0): [DRI2] Setup complete
[ 13.381] (II) modeset(0): [DRI2] DRI driver: i965
[ 13.381] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 13.381] (II) Initializing extension Generic Event Extension
[ 13.381] (II) Initializing extension SHAPE
[ 13.381] (II) Initializing extension MIT-SHM
[ 13.381] (II) Initializing extension XInputExtension
[ 13.384] (II) Initializing extension XTEST
[ 13.384] (II) Initializing extension BIG-REQUESTS
[ 13.385] (II) Initializing extension SYNC
[ 13.385] (II) Initializing extension XKEYBOARD
[ 13.385] (II) Initializing extension XC-MISC
[ 13.385] (II) Initializing extension SECURITY
[ 13.385] (II) Initializing extension XFIXES
[ 13.385] (II) Initializing extension RENDER
[ 13.386] (II) Initializing extension RANDR
[ 13.386] (II) Initializing extension COMPOSITE
[ 13.386] (II) Initializing extension DAMAGE
[ 13.386] (II) Initializing extension MIT-SCREEN-SAVER
[ 13.386] (II) Initializing extension DOUBLE-BUFFER
[ 13.386] (II) Initializing extension RECORD
[ 13.387] (II) Initializing extension DPMS
[ 13.387] (II) Initializing extension Present
[ 13.387] (II) Initializing extension DRI3
[ 13.387] (II) Initializing extension X-Resource
[ 13.387] (II) Initializing extension XVideo
[ 13.387] (II) Initializing extension XVideo-MotionCompensation
[ 13.387] (II) Initializing extension SELinux
[ 13.387] (II) SELinux: Disabled on system
[ 13.387] (II) Initializing extension GLX
[ 13.395] (II) AIGLX: Loaded and initialized i965
[ 13.395] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 13.395] (II) Initializing extension XFree86-VidModeExtension
[ 13.395] (II) Initializing extension XFree86-DGA
[ 13.396] (II) Initializing extension XFree86-DRI
[ 13.396] (II) Initializing extension DRI2
[ 13.405] (II) modeset(0): Damage tracking initialized
[ 13.405] (II) modeset(0): Setting screen physical size to 1016 x 571
[ 13.446] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 13.446] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 13.446] (II) LoadModule: "libinput"
[ 13.446] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 13.449] (II) Module libinput: vendor="X.Org Foundation"
[ 13.449] compiled for 1.20.4, module version = 0.29.0
[ 13.449] Module class: X.Org XInput Driver
[ 13.449] ABI class: X.Org XInput driver, version 24.1
[ 13.449] (II) Using input driver 'libinput' for 'Power Button'
[ 13.449] (**) Power Button: always reports core events
[ 13.449] (**) Option "Device" "/dev/input/event3"
[ 13.449] (**) Option "_source" "server/udev"
[ 13.452] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 13.452] (II) event3 - Power Button: device is a keyboard
[ 13.452] (II) event3 - Power Button: device removed
[ 13.476] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 13.476] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 13.476] (**) Option "xkb_model" "pc105"
[ 13.476] (**) Option "xkb_layout" "be"
[ 13.497] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 13.497] (II) event3 - Power Button: device is a keyboard
[ 13.497] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 13.497] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 13.497] (II) Using input driver 'libinput' for 'Video Bus'
[ 13.497] (**) Video Bus: always reports core events
[ 13.497] (**) Option "Device" "/dev/input/event4"
[ 13.497] (**) Option "_source" "server/udev"
[ 13.498] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 13.498] (II) event4 - Video Bus: device is a keyboard
[ 13.498] (II) event4 - Video Bus: device removed
[ 13.540] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 13.540] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 13.540] (**) Option "xkb_model" "pc105"
[ 13.540] (**) Option "xkb_layout" "be"
[ 13.541] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 13.541] (II) event4 - Video Bus: device is a keyboard
[ 13.542] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 13.542] (II) No input driver specified, ignoring this device.
[ 13.542] (II) This device may have been added with another device file.
[ 13.543] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 13.543] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 13.543] (II) Using input driver 'libinput' for 'Power Button'
[ 13.543] (**) Power Button: always reports core events
[ 13.543] (**) Option "Device" "/dev/input/event2"
[ 13.543] (**) Option "_source" "server/udev"
[ 13.544] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 13.544] (II) event2 - Power Button: device is a keyboard
[ 13.544] (II) event2 - Power Button: device removed
[ 13.568] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 13.568] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 13.568] (**) Option "xkb_model" "pc105"
[ 13.568] (**) Option "xkb_layout" "be"
[ 13.569] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 13.569] (II) event2 - Power Button: device is a keyboard
[ 13.571] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event11)
[ 13.571] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[ 13.571] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'
[ 13.571] (**) Integrated Camera: Integrated C: always reports core events
[ 13.571] (**) Option "Device" "/dev/input/event11"
[ 13.571] (**) Option "_source" "server/udev"
[ 13.572] (II) event11 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[ 13.572] (II) event11 - Integrated Camera: Integrated C: device is a keyboard
[ 13.572] (II) event11 - Integrated Camera: Integrated C: device removed
[ 13.604] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input21/event11"
[ 13.604] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 9)
[ 13.604] (**) Option "xkb_model" "pc105"
[ 13.604] (**) Option "xkb_layout" "be"
[ 13.606] (II) event11 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[ 13.606] (II) event11 - Integrated Camera: Integrated C: device is a keyboard
[ 13.607] (II) config/udev: Adding input device Wacom HID 51E3 Pen (/dev/input/event9)
[ 13.607] (**) Wacom HID 51E3 Pen: Applying InputClass "libinput tablet catchall"
[ 13.607] (**) Wacom HID 51E3 Pen: Applying InputClass "Wacom USB tablet class"
[ 13.607] (**) Wacom HID 51E3 Pen: Applying InputClass "Wacom tablet class"
[ 13.607] (II) LoadModule: "wacom"
[ 13.607] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 13.610] (II) Module wacom: vendor="X.Org Foundation"
[ 13.610] compiled for 1.20.4, module version = 0.34.99
[ 13.611] Module class: X.Org XInput Driver
[ 13.611] ABI class: X.Org XInput driver, version 24.1
[ 13.611] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire,
Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8,
Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8,
Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660,
CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L,
CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12,
Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800,
PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931,
DTU2231, DTU1631, Intuos2 4x5, Intuos2 6x8, Intuos2 9x12,
Intuos2 12x12, Intuos2 12x18, Intuos2 6x8 , Volito, PenStation,
Volito2 4x5, Volito2 2x3, PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6,
Bamboo1 5x8, Intuos3 4x5, Intuos3 6x8, Intuos3 9x12, Intuos3 12x12,
Intuos3 12x19, Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9,
Intuos4 8x13, Intuos4 12x19, Intuos4 WL USB Endpoint,
Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M,
Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M,
Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2,
Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer),
Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, Mobilestudio Pro 13,
MobileStudio Pro 16, MobileStudio Pro 13, MobileStudio Pro 16,
Cintiq 13 FHD Pro, Cintiq 16 UHD Pro, Cintiq 13 FHD Pro,
Cintiq 16 UHD Pro, TabletPC 0x90, TabletPC 0x93, TabletPC 0x97,
TabletPC 0x9A, CapPlus 0x9F, TabletPC 0xE2, TabletPC 0xE3,
TabletPC 0xE5, TabletPC 0xE6, TabletPC 0xEC, TabletPC 0xED,
TabletPC 0xEF, TabletPC 0x100, TabletPC 0x101, TabletPC 0x10D,
TabletPC 0x116, TabletPC 0x12C, TabletPC 0x4001, TabletPC 0x4004,
TabletPC 0x5000, TabletPC 0x5002, usb:172f:0024, usb:172f:0025,
usb:172f:0026, usb:172f:0027, usb:172f:0028, usb:172f:0030,
usb:172f:0031, usb:172f:0032, usb:172f:0033, usb:172f:0034,
usb:172f:0035, usb:172f:0036, usb:172f:0037, usb:172f:0038,
usb:172f:0039, usb:172f:0051, usb:172f:0052, usb:172f:0053,
usb:172f:0054, usb:172f:0055, usb:172f:0056, usb:172f:0057,
usb:172f:0058, usb:172f:0500, usb:172f:0501, usb:172f:0502,
usb:172f:0503, usb:1b96:0001, usb:17ef:6004
[ 13.612] (II) Using input driver 'wacom' for 'Wacom HID 51E3 Pen'
[ 13.612] (**) Wacom HID 51E3 Pen: always reports core events
[ 13.612] (**) Option "Device" "/dev/input/event9"
[ 13.612] (II) Wacom HID 51E3 Pen: type not specified, assuming 'stylus'.
[ 13.612] (II) Wacom HID 51E3 Pen: other types will be automatically added.
[ 13.612] (--) Wacom HID 51E3 Pen stylus: using pressure threshold of 851 for button 1
[ 13.612] (--) Wacom HID 51E3 Pen stylus: maxX=30931 maxY=17399 maxZ=4095 resX=100000 resY=100000 tilt=enabled
[ 13.612] (II) Wacom HID 51E3 Pen stylus: hotplugging dependent devices.
[ 13.612] (EE) Wacom HID 51E3 Pen stylus: Invalid type 'cursor' for this device.
[ 13.612] (EE) Wacom HID 51E3 Pen stylus: Invalid type 'touch' for this device.
[ 13.612] (EE) Wacom HID 51E3 Pen stylus: Invalid type 'pad' for this device.
[ 13.612] (II) Wacom HID 51E3 Pen stylus: hotplugging completed.
[ 13.652] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-WCOM51E3:00/0018:056A:51E3.0001/input/input18/event9"
[ 13.652] (II) XINPUT: Adding extended input device "Wacom HID 51E3 Pen stylus" (type: STYLUS, id 10)
[ 13.652] (**) Wacom HID 51E3 Pen stylus: (accel) keeping acceleration scheme 1
[ 13.652] (**) Wacom HID 51E3 Pen stylus: (accel) acceleration profile 0
[ 13.652] (**) Wacom HID 51E3 Pen stylus: (accel) acceleration factor: 2.000
[ 13.652] (**) Wacom HID 51E3 Pen stylus: (accel) acceleration threshold: 4
[ 13.653] (II) config/udev: Adding input device Wacom HID 51E3 Pen (/dev/input/mouse2)
[ 13.653] (II) No input driver specified, ignoring this device.
[ 13.653] (II) This device may have been added with another device file.
[ 13.654] (II) config/udev: Adding input device Wacom HID 51E3 Finger (/dev/input/event10)
[ 13.654] (**) Wacom HID 51E3 Finger: Applying InputClass "libinput touchscreen catchall"
[ 13.654] (**) Wacom HID 51E3 Finger: Applying InputClass "Wacom USB touchscreen class"
[ 13.654] (**) Wacom HID 51E3 Finger: Applying InputClass "Wacom touchscreen class"
[ 13.654] (II) Using input driver 'wacom' for 'Wacom HID 51E3 Finger'
[ 13.654] (**) Wacom HID 51E3 Finger: always reports core events
[ 13.654] (**) Option "Device" "/dev/input/event10"
[ 13.654] (EE) Wacom HID 51E3 Finger: Invalid type 'stylus' for this device.
[ 13.654] (EE) Wacom HID 51E3 Finger: Invalid type 'eraser' for this device.
[ 13.654] (EE) Wacom HID 51E3 Finger: Invalid type 'cursor' for this device.
[ 13.654] (II) Wacom HID 51E3 Finger: type not specified, assuming 'touch'.
[ 13.654] (II) Wacom HID 51E3 Finger: other types will be automatically added.
[ 13.654] (--) Wacom HID 51E3 Finger touch: maxX=12372 maxY=6960 maxZ=0 resX=40000 resY=40000
[ 13.654] (II) Wacom HID 51E3 Finger touch: hotplugging dependent devices.
[ 13.654] (EE) Wacom HID 51E3 Finger touch: Invalid type 'stylus' for this device.
[ 13.654] (EE) Wacom HID 51E3 Finger touch: Invalid type 'eraser' for this device.
[ 13.654] (EE) Wacom HID 51E3 Finger touch: Invalid type 'cursor' for this device.
[ 13.654] (EE) Wacom HID 51E3 Finger touch: Invalid type 'pad' for this device.
[ 13.654] (II) Wacom HID 51E3 Finger touch: hotplugging completed.
[ 13.692] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-WCOM51E3:00/0018:056A:51E3.0001/input/input19/event10"
[ 13.692] (II) XINPUT: Adding extended input device "Wacom HID 51E3 Finger touch" (type: TOUCH, id 11)
[ 13.692] (**) Wacom HID 51E3 Finger touch: (accel) keeping acceleration scheme 1
[ 13.692] (**) Wacom HID 51E3 Finger touch: (accel) acceleration profile 0
[ 13.692] (**) Wacom HID 51E3 Finger touch: (accel) acceleration factor: 2.000
[ 13.692] (**) Wacom HID 51E3 Finger touch: (accel) acceleration threshold: 4
[ 13.693] (II) config/udev: Adding input device Wacom HID 51E3 Finger (/dev/input/mouse3)
[ 13.693] (II) No input driver specified, ignoring this device.
[ 13.693] (II) This device may have been added with another device file.
[ 13.694] (II) config/udev: Adding input device SYNA2B31:00 06CB:CD3E Mouse (/dev/input/event7)
[ 13.694] (**) SYNA2B31:00 06CB:CD3E Mouse: Applying InputClass "libinput pointer catchall"
[ 13.694] (II) Using input driver 'libinput' for 'SYNA2B31:00 06CB:CD3E Mouse'
[ 13.694] (**) SYNA2B31:00 06CB:CD3E Mouse: always reports core events
[ 13.694] (**) Option "Device" "/dev/input/event7"
[ 13.694] (**) Option "_source" "server/udev"
[ 13.695] (II) event7 - SYNA2B31:00 06CB:CD3E Mouse: is tagged by udev as: Mouse
[ 13.696] (II) event7 - SYNA2B31:00 06CB:CD3E Mouse: device is a pointer
[ 13.696] (II) event7 - SYNA2B31:00 06CB:CD3E Mouse: device removed
[ 13.740] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-15/i2c-SYNA2B31:00/0018:06CB:CD3E.0002/input/input15/event7"
[ 13.740] (II) XINPUT: Adding extended input device "SYNA2B31:00 06CB:CD3E Mouse" (type: MOUSE, id 12)
[ 13.740] (**) Option "AccelerationScheme" "none"
[ 13.740] (**) SYNA2B31:00 06CB:CD3E Mouse: (accel) selected scheme none/0
[ 13.740] (**) SYNA2B31:00 06CB:CD3E Mouse: (accel) acceleration factor: 2.000
[ 13.740] (**) SYNA2B31:00 06CB:CD3E Mouse: (accel) acceleration threshold: 4
[ 13.742] (II) event7 - SYNA2B31:00 06CB:CD3E Mouse: is tagged by udev as: Mouse
[ 13.742] (II) event7 - SYNA2B31:00 06CB:CD3E Mouse: device is a pointer
[ 13.743] (II) config/udev: Adding input device SYNA2B31:00 06CB:CD3E Mouse (/dev/input/mouse0)
[ 13.743] (II) No input driver specified, ignoring this device.
[ 13.743] (II) This device may have been added with another device file.
[ 13.744] (II) config/udev: Adding input device SYNA2B31:00 06CB:CD3E Touchpad (/dev/input/event8)
[ 13.744] (**) SYNA2B31:00 06CB:CD3E Touchpad: Applying InputClass "libinput touchpad catchall"
[ 13.744] (II) Using input driver 'libinput' for 'SYNA2B31:00 06CB:CD3E Touchpad'
[ 13.744] (**) SYNA2B31:00 06CB:CD3E Touchpad: always reports core events
[ 13.744] (**) Option "Device" "/dev/input/event8"
[ 13.744] (**) Option "_source" "server/udev"
[ 13.746] (II) event8 - SYNA2B31:00 06CB:CD3E Touchpad: is tagged by udev as: Touchpad
[ 13.747] (II) event8 - SYNA2B31:00 06CB:CD3E Touchpad: device is a touchpad
[ 13.747] (II) event8 - SYNA2B31:00 06CB:CD3E Touchpad: device removed
[ 13.788] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-15/i2c-SYNA2B31:00/0018:06CB:CD3E.0002/input/input16/event8"
[ 13.788] (II) XINPUT: Adding extended input device "SYNA2B31:00 06CB:CD3E Touchpad" (type: TOUCHPAD, id 13)
[ 13.790] (**) Option "AccelerationScheme" "none"
[ 13.790] (**) SYNA2B31:00 06CB:CD3E Touchpad: (accel) selected scheme none/0
[ 13.790] (**) SYNA2B31:00 06CB:CD3E Touchpad: (accel) acceleration factor: 2.000
[ 13.790] (**) SYNA2B31:00 06CB:CD3E Touchpad: (accel) acceleration threshold: 4
[ 13.792] (II) event8 - SYNA2B31:00 06CB:CD3E Touchpad: is tagged by udev as: Touchpad
[ 13.793] (II) event8 - SYNA2B31:00 06CB:CD3E Touchpad: device is a touchpad
[ 13.794] (II) config/udev: Adding input device SYNA2B31:00 06CB:CD3E Touchpad (/dev/input/mouse1)
[ 13.794] (II) No input driver specified, ignoring this device.
[ 13.794] (II) This device may have been added with another device file.
[ 13.795] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event5)
[ 13.795] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[ 13.795] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[ 13.795] (**) Ideapad extra buttons: always reports core events
[ 13.795] (**) Option "Device" "/dev/input/event5"
[ 13.795] (**) Option "_source" "server/udev"
[ 13.796] (II) event5 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 13.796] (II) event5 - Ideapad extra buttons: device is a keyboard
[ 13.796] (II) event5 - Ideapad extra buttons: device removed
[ 13.844] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5/event5"
[ 13.844] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 14)
[ 13.844] (**) Option "xkb_model" "pc105"
[ 13.844] (**) Option "xkb_layout" "be"
[ 13.845] (II) event5 - Ideapad extra buttons: is tagged by udev as: Keyboard
[ 13.845] (II) event5 - Ideapad extra buttons: device is a keyboard
[ 13.846] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 13.846] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 13.846] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 13.846] (**) AT Translated Set 2 keyboard: always reports core events
[ 13.846] (**) Option "Device" "/dev/input/event0"
[ 13.846] (**) Option "_source" "server/udev"
[ 13.847] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 13.848] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 13.848] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 13.876] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 13.876] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 13.876] (**) Option "xkb_model" "pc105"
[ 13.876] (**) Option "xkb_layout" "be"
[ 13.877] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 13.878] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 13.879] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 13.879] (II) No input driver specified, ignoring this device.
[ 13.879] (II) This device may have been added with another device file.
[ 13.897] (**) Wacom HID 51E3 Pen eraser: Applying InputClass "libinput tablet catchall"
[ 13.897] (**) Wacom HID 51E3 Pen eraser: Applying InputClass "Wacom USB tablet class"
[ 13.897] (**) Wacom HID 51E3 Pen eraser: Applying InputClass "Wacom tablet class"
[ 13.897] (II) Using input driver 'wacom' for 'Wacom HID 51E3 Pen eraser'
[ 13.897] (**) Wacom HID 51E3 Pen eraser: always reports core events
[ 13.897] (**) Option "Device" "/dev/input/event9"
[ 13.897] (**) Option "Type" "eraser"
[ 13.897] (--) Wacom HID 51E3 Pen eraser: maxX=30931 maxY=17399 maxZ=4095 resX=100000 resY=100000 tilt=enabled
[ 13.916] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-WCOM51E3:00/0018:056A:51E3.0001/input/input18/event9"
[ 13.916] (II) XINPUT: Adding extended input device "Wacom HID 51E3 Pen eraser" (type: ERASER, id 16)
[ 13.916] (**) Wacom HID 51E3 Pen eraser: (accel) keeping acceleration scheme 1
[ 13.916] (**) Wacom HID 51E3 Pen eraser: (accel) acceleration profile 0
[ 13.916] (**) Wacom HID 51E3 Pen eraser: (accel) acceleration factor: 2.000
[ 13.916] (**) Wacom HID 51E3 Pen eraser: (accel) acceleration threshold: 4
[ 14.466] (II) modeset(0): EDID vendor "BOE", prod id 2081
[ 14.466] (II) modeset(0): Printing DDC gathered Modelines:
[ 14.466] (II) modeset(0): Modeline "3840x2160"x0.0 533.28 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[ 14.477] (II) modeset(0): EDID vendor "BOE", prod id 2081
[ 14.477] (II) modeset(0): Printing DDC gathered Modelines:
[ 14.477] (II) modeset(0): Modeline "3840x2160"x0.0 533.28 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[ 14.489] (II) modeset(0): EDID vendor "BOE", prod id 2081
[ 14.489] (II) modeset(0): Printing DDC gathered Modelines:
[ 14.489] (II) modeset(0): Modeline "3840x2160"x0.0 533.28 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[ 14.500] (II) modeset(0): EDID vendor "BOE", prod id 2081
[ 14.500] (II) modeset(0): Printing DDC gathered Modelines:
[ 14.500] (II) modeset(0): Modeline "3840x2160"x0.0 533.28 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[ 14.529] (II) modeset(0): EDID vendor "BOE", prod id 2081
[ 14.529] (II) modeset(0): Printing DDC gathered Modelines:
[ 14.529] (II) modeset(0): Modeline "3840x2160"x0.0 533.28 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[ 15.152] (II) modeset(0): EDID vendor "BOE", prod id 2081
[ 15.152] (II) modeset(0): Printing DDC gathered Modelines:
[ 15.152] (II) modeset(0): Modeline "3840x2160"x0.0 533.28 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[ 16.023] (II) modeset(0): EDID vendor "BOE", prod id 2081
[ 16.023] (II) modeset(0): Printing DDC gathered Modelines:
[ 16.023] (II) modeset(0): Modeline "3840x2160"x0.0 533.28 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[ 16.287] (II) modeset(0): EDID vendor "BOE", prod id 2081
[ 16.287] (II) modeset(0): Printing DDC gathered Modelines:
[ 16.287] (II) modeset(0): Modeline "3840x2160"x0.0 533.28 3840 3888 3920 4000 2160 2163 2168 2222 +hsync -vsync (133.3 kHz eP)
[ 19.564] (II) config/udev: Adding input device M720 Triathlon Mouse (/dev/input/mouse4)
[ 19.564] (II) No input driver specified, ignoring this device.
[ 19.564] (II) This device may have been added with another device file.
[ 19.614] (II) config/udev: Adding input device M720 Triathlon Mouse (/dev/input/event13)
[ 19.614] (**) M720 Triathlon Mouse: Applying InputClass "libinput pointer catchall"
[ 19.614] (II) Using input driver 'libinput' for 'M720 Triathlon Mouse'
[ 19.614] (**) M720 Triathlon Mouse: always reports core events
[ 19.614] (**) Option "Device" "/dev/input/event13"
[ 19.614] (**) Option "_source" "server/udev"
[ 19.615] (II) event13 - M720 Triathlon Mouse: is tagged by udev as: Mouse
[ 19.615] (II) event13 - M720 Triathlon Mouse: device is a pointer
[ 19.615] (II) event13 - M720 Triathlon Mouse: device removed
[ 19.676] (**) Option "config_info" "udev:/sys/devices/virtual/misc/uhid/0005:046D:B015.0005/input/input23/event13"
[ 19.676] (II) XINPUT: Adding extended input device "M720 Triathlon Mouse" (type: MOUSE, id 17)
[ 19.677] (**) Option "AccelerationScheme" "none"
[ 19.679] (**) M720 Triathlon Mouse: (accel) selected scheme none/0
[ 19.679] (**) M720 Triathlon Mouse: (accel) acceleration factor: 2.000
[ 19.679] (**) M720 Triathlon Mouse: (accel) acceleration threshold: 4
[ 19.680] (II) event13 - M720 Triathlon Mouse: is tagged by udev as: Mouse
[ 19.680] (II) event13 - M720 Triathlon Mouse: device is a pointer
[ 19.682] (II) config/udev: Adding input device M720 Triathlon Keyboard (/dev/input/event12)
[ 19.682] (**) M720 Triathlon Keyboard: Applying InputClass "libinput keyboard catchall"
[ 19.682] (II) Using input driver 'libinput' for 'M720 Triathlon Keyboard'
[ 19.682] (**) M720 Triathlon Keyboard: always reports core events
[ 19.682] (**) Option "Device" "/dev/input/event12"
[ 19.682] (**) Option "_source" "server/udev"
[ 19.684] (II) event12 - M720 Triathlon Keyboard: is tagged by udev as: Keyboard
[ 19.684] (II) event12 - M720 Triathlon Keyboard: device is a keyboard
[ 19.684] (II) event12 - M720 Triathlon Keyboard: device removed
[ 19.708] (**) Option "config_info" "udev:/sys/devices/virtual/misc/uhid/0005:046D:B015.0005/input/input22/event12"
[ 19.708] (II) XINPUT: Adding extended input device "M720 Triathlon Keyboard" (type: KEYBOARD, id 18)
[ 19.708] (**) Option "xkb_model" "pc105"
[ 19.708] (**) Option "xkb_layout" "be"
[ 19.708] (WW) Option "xkb_variant" requires a string value
[ 19.708] (WW) Option "xkb_options" requires a string value
[ 19.710] (II) event12 - M720 Triathlon Keyboard: is tagged by udev as: Keyboard
[ 19.710] (II) event12 - M720 Triathlon Keyboard: device is a keyboard
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
E: SUBSYSTEM=input
E: PRODUCT=19/0/1/0
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PROP=0
E: EV=3
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: USEC_INITIALIZED=1171106
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: TAGS=:seat:
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
N: input/event3
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event3
E: MAJOR=13
E: MINOR=67
E: USEC_INITIALIZED=10002601
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: XKBMODEL=pc105
E: XKBLAYOUT=be
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/1:LNXPWRBN/button
E: TAGS=:power-switch:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
E: SUBSYSTEM=input
E: PRODUCT=19/0/6/0
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PROP=0
E: EV=3
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: USEC_INITIALIZED=1373490
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: ID_FOR_SEAT=input-acpi-LNXVIDEO_00
E: TAGS=:seat:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4
N: input/event4
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event4
E: MAJOR=13
E: MINOR=68
E: USEC_INITIALIZED=9996465
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: XKBMODEL=pc105
E: XKBLAYOUT=be
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/6:LNXVIDEO/video
E: TAGS=:power-switch:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1b/PNP0C09:00/PNP0C0D:00/input/input1
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1b/PNP0C09:00/PNP0C0D:00/input/input1
E: SUBSYSTEM=input
E: PRODUCT=19/0/5/0
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PROP=0
E: EV=21
E: SW=1
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: USEC_INITIALIZED=1170405
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: ID_FOR_SEAT=input-acpi-PNP0C0D_00
E: TAGS=:seat:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1b/PNP0C09:00/PNP0C0D:00/input/input1/event1
N: input/event1
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1b/PNP0C09:00/PNP0C0D:00/input/input1/event1
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event1
E: MAJOR=13
E: MINOR=65
E: USEC_INITIALIZED=10026581
E: ID_INPUT=1
E: ID_INPUT_SWITCH=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: LIBINPUT_DEVICE_GROUP=19/0/5:PNP0C0D/button
E: TAGS=:power-switch:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
E: SUBSYSTEM=input
E: PRODUCT=19/0/1/0
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PROP=0
E: EV=3
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: USEC_INITIALIZED=1170779
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: TAGS=:seat:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2
N: input/event2
L: 0
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event2
E: MAJOR=13
E: MINOR=66
E: USEC_INITIALIZED=10042458
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: XKBMODEL=pc105
E: XKBLAYOUT=be
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/1:PNP0C0C/button
E: TAGS=:power-switch:
P: /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input21
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input21
E: SUBSYSTEM=input
E: PRODUCT=3/13d3/56b2/1711
E: NAME="Integrated Camera: Integrated C"
E: PHYS="usb-0000:00:14.0-1/button"
E: PROP=0
E: EV=3
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v13D3p56B2e1711-e0,1,kD4,ramlsfw
E: USEC_INITIALIZED=11304301
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=SunplusIT_Inc
E: ID_VENDOR_ENC=SunplusIT\x20Inc
E: ID_VENDOR_ID=13d3
E: ID_MODEL=Integrated_Camera
E: ID_MODEL_ENC=Integrated\x20Camera
E: ID_MODEL_ID=56b2
E: ID_REVISION=1711
E: ID_SERIAL=SunplusIT_Inc_Integrated_Camera
E: ID_TYPE=video
E: ID_BUS=usb
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=uvcvideo
E: ID_PATH=pci-0000:00:14.0-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_1_0
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_1_1_0
E: TAGS=:seat:
P: /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input21/event11
N: input/event11
L: 0
S: input/by-path/pci-0000:00:14.0-usb-0:1:1.0-event
S: input/by-id/usb-SunplusIT_Inc_Integrated_Camera-event-if00
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input21/event11
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event11
E: MAJOR=13
E: MINOR=75
E: USEC_INITIALIZED=11354518
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=SunplusIT_Inc
E: ID_VENDOR_ENC=SunplusIT\x20Inc
E: ID_VENDOR_ID=13d3
E: ID_MODEL=Integrated_Camera
E: ID_MODEL_ENC=Integrated\x20Camera
E: ID_MODEL_ID=56b2
E: ID_REVISION=1711
E: ID_SERIAL=SunplusIT_Inc_Integrated_Camera
E: ID_TYPE=video
E: ID_BUS=usb
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=uvcvideo
E: ID_PATH=pci-0000:00:14.0-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_1_0
E: XKBMODEL=pc105
E: XKBLAYOUT=be
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=3/13d3/56b2:usb-0000:00:14.0-1/button
E: DEVLINKS=/dev/input/by-path/pci-0000:00:14.0-usb-0:1:1.0-event /dev/input/by-id/usb-SunplusIT_Inc_Integrated_Camera-event-if00
E: TAGS=:power-switch:
P: /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-WCOM51E3:00/0018:056A:51E3.0001/input/input18
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-WCOM51E3:00/0018:056A:51E3.0001/input/input18
E: SUBSYSTEM=input
E: PRODUCT=18/56a/51e3/100
E: NAME="Wacom HID 51E3 Pen"
E: PHYS="i2c-WCOM51E3:00"
E: UNIQ=""
E: PROP=2
E: EV=1b
E: KEY=1e03 0 0 0 0 0
E: ABS=1000d000003
E: MSC=1
E: MODALIAS=input:b0018v056Ap51E3e0100-e0,1,3,4,k140,141,149,14A,14B,14C,ra0,1,18,1A,1B,28,m0,lsfw
E: USEC_INITIALIZED=11041447
E: ID_INPUT=1
E: ID_INPUT_TABLET=1
E: ID_SERIAL=noserial
E: ID_PATH=pci-0000:00:15.0-platform-i2c_designware.0
E: ID_PATH_TAG=pci-0000_00_15_0-platform-i2c_designware_0
E: ID_FOR_SEAT=input-pci-0000_00_15_0-platform-i2c_designware_0
E: TAGS=:seat:
P: /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-WCOM51E3:00/0018:056A:51E3.0001/input/input18/event9
N: input/event9
L: 0
S: input/by-path/pci-0000:00:15.0-platform-i2c_designware.0-event-mouse
E: DEVPATH=/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-WCOM51E3:00/0018:056A:51E3.0001/input/input18/event9
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event9
E: MAJOR=13
E: MINOR=73
E: USEC_INITIALIZED=11129841
E: ID_INPUT=1
E: ID_INPUT_TABLET=1
E: ID_INPUT_WIDTH_MM=309
E: ID_INPUT_HEIGHT_MM=173
E: ID_SERIAL=noserial
E: ID_PATH=pci-0000:00:15.0-platform-i2c_designware.0
E: ID_PATH_TAG=pci-0000_00_15_0-platform-i2c_designware_0
E: LIBINPUT_DEVICE_GROUP=18/56a/51e3:i2c-WCOM51E3:00
E: DEVLINKS=/dev/input/by-path/pci-0000:00:15.0-platform-i2c_designware.0-event-mouse
P: /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-WCOM51E3:00/0018:056A:51E3.0001/input/input18/mouse2
N: input/mouse2
L: 0
S: input/by-path/pci-0000:00:15.0-platform-i2c_designware.0-mouse
E: DEVPATH=/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-WCOM51E3:00/0018:056A:51E3.0001/input/input18/mouse2
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/mouse2
E: MAJOR=13
E: MINOR=34
E: USEC_INITIALIZED=11042698
E: ID_INPUT=1
E: ID_INPUT_TABLET=1
E: ID_SERIAL=noserial
E: ID_PATH=pci-0000:00:15.0-platform-i2c_designware.0
E: ID_PATH_TAG=pci-0000_00_15_0-platform-i2c_designware_0
E: DEVLINKS=/dev/input/by-path/pci-0000:00:15.0-platform-i2c_designware.0-mouse
P: /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-WCOM51E3:00/0018:056A:51E3.0001/input/input19
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-WCOM51E3:00/0018:056A:51E3.0001/input/input19
E: SUBSYSTEM=input
E: PRODUCT=18/56a/51e3/100
E: NAME="Wacom HID 51E3 Finger"
E: PHYS="i2c-WCOM51E3:00"
E: UNIQ=""
E: PROP=2
E: EV=b
E: KEY=400 0 0 0 0 0
E: ABS=260800000000003
E: MODALIAS=input:b0018v056Ap51E3e0100-e0,1,3,k14A,ra0,1,2F,35,36,39,mlsfw
E: USEC_INITIALIZED=11041512
E: ID_INPUT=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_PATH=pci-0000:00:15.0-platform-i2c_designware.0
E: ID_PATH_TAG=pci-0000_00_15_0-platform-i2c_designware_0
E: ID_FOR_SEAT=input-pci-0000_00_15_0-platform-i2c_designware_0
E: TAGS=:seat:
P: /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-WCOM51E3:00/0018:056A:51E3.0001/input/input19/event10
N: input/event10
L: 0
S: input/by-path/pci-0000:00:15.0-platform-i2c_designware.0-event
E: DEVPATH=/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-WCOM51E3:00/0018:056A:51E3.0001/input/input19/event10
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event10
E: MAJOR=13
E: MINOR=74
E: USEC_INITIALIZED=11200561
E: ID_INPUT=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_INPUT_WIDTH_MM=309
E: ID_INPUT_HEIGHT_MM=174
E: ID_PATH=pci-0000:00:15.0-platform-i2c_designware.0
E: ID_PATH_TAG=pci-0000_00_15_0-platform-i2c_designware_0
E: LIBINPUT_DEVICE_GROUP=18/56a/51e3:i2c-WCOM51E3:00
E: LIBINPUT_FUZZ_35=4
E: LIBINPUT_FUZZ_36=4
E: DEVLINKS=/dev/input/by-path/pci-0000:00:15.0-platform-i2c_designware.0-event
P: /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-WCOM51E3:00/0018:056A:51E3.0001/input/input19/mouse3
N: input/mouse3
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-WCOM51E3:00/0018:056A:51E3.0001/input/input19/mouse3
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/mouse3
E: MAJOR=13
E: MINOR=35
E: USEC_INITIALIZED=11042546
E: ID_INPUT=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_PATH=pci-0000:00:15.0-platform-i2c_designware.0
E: ID_PATH_TAG=pci-0000_00_15_0-platform-i2c_designware_0
P: /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-15/i2c-SYNA2B31:00/0018:06CB:CD3E.0002/input/input15
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-15/i2c-SYNA2B31:00/0018:06CB:CD3E.0002/input/input15
E: SUBSYSTEM=input
E: PRODUCT=18/6cb/cd3e/100
E: NAME="SYNA2B31:00 06CB:CD3E Mouse"
E: PHYS="i2c-SYNA2B31:00"
E: UNIQ=""
E: PROP=0
E: EV=17
E: KEY=30000 0 0 0 0
E: REL=3
E: MSC=10
E: MODALIAS=input:b0018v06CBpCD3Ee0100-e0,1,2,4,k110,111,r0,1,am4,lsfw
E: USEC_INITIALIZED=10911761
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=pci-0000:00:15.1-platform-i2c_designware.1
E: ID_PATH_TAG=pci-0000_00_15_1-platform-i2c_designware_1
E: ID_FOR_SEAT=input-pci-0000_00_15_1-platform-i2c_designware_1
E: TAGS=:seat:
P: /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-15/i2c-SYNA2B31:00/0018:06CB:CD3E.0002/input/input15/event7
N: input/event7
L: 0
S: input/by-path/pci-0000:00:15.1-platform-i2c_designware.1-event-mouse
E: DEVPATH=/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-15/i2c-SYNA2B31:00/0018:06CB:CD3E.0002/input/input15/event7
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event7
E: MAJOR=13
E: MINOR=71
E: USEC_INITIALIZED=11094147
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=pci-0000:00:15.1-platform-i2c_designware.1
E: ID_PATH_TAG=pci-0000_00_15_1-platform-i2c_designware_1
E: LIBINPUT_DEVICE_GROUP=18/6cb/cd3e:i2c-SYNA2B31:00
E: DEVLINKS=/dev/input/by-path/pci-0000:00:15.1-platform-i2c_designware.1-event-mouse
P: /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-15/i2c-SYNA2B31:00/0018:06CB:CD3E.0002/input/input15/mouse0
N: input/mouse0
L: 0
S: input/by-path/pci-0000:00:15.1-platform-i2c_designware.1-mouse
E: DEVPATH=/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-15/i2c-SYNA2B31:00/0018:06CB:CD3E.0002/input/input15/mouse0
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/mouse0
E: MAJOR=13
E: MINOR=32
E: USEC_INITIALIZED=11039931
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=pci-0000:00:15.1-platform-i2c_designware.1
E: ID_PATH_TAG=pci-0000_00_15_1-platform-i2c_designware_1
E: DEVLINKS=/dev/input/by-path/pci-0000:00:15.1-platform-i2c_designware.1-mouse
P: /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-15/i2c-SYNA2B31:00/0018:06CB:CD3E.0002/input/input16
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-15/i2c-SYNA2B31:00/0018:06CB:CD3E.0002/input/input16
E: SUBSYSTEM=input
E: PRODUCT=18/6cb/cd3e/100
E: NAME="SYNA2B31:00 06CB:CD3E Touchpad"
E: PHYS="i2c-SYNA2B31:00"
E: UNIQ=""
E: PROP=5
E: EV=1b
E: KEY=e520 10000 0 0 0 0
E: ABS=2e0800000000003
E: MSC=20
E: MODALIAS=input:b0018v06CBpCD3Ee0100-e0,1,3,4,k110,145,148,14A,14D,14E,14F,ra0,1,2F,35,36,37,39,m5,lsfw
E: USEC_INITIALIZED=10911796
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=pci-0000:00:15.1-platform-i2c_designware.1
E: ID_PATH_TAG=pci-0000_00_15_1-platform-i2c_designware_1
E: ID_FOR_SEAT=input-pci-0000_00_15_1-platform-i2c_designware_1
E: TAGS=:seat:
P: /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-15/i2c-SYNA2B31:00/0018:06CB:CD3E.0002/input/input16/event8
N: input/event8
L: 0
S: input/by-path/pci-0000:00:15.1-platform-i2c_designware.1-event-mouse
E: DEVPATH=/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-15/i2c-SYNA2B31:00/0018:06CB:CD3E.0002/input/input16/event8
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event8
E: MAJOR=13
E: MINOR=72
E: USEC_INITIALIZED=11189003
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_INPUT_WIDTH_MM=101
E: ID_INPUT_HEIGHT_MM=66
E: ID_SERIAL=noserial
E: ID_PATH=pci-0000:00:15.1-platform-i2c_designware.1
E: ID_PATH_TAG=pci-0000_00_15_1-platform-i2c_designware_1
E: LIBINPUT_DEVICE_GROUP=18/6cb/cd3e:i2c-SYNA2B31:00
E: DEVLINKS=/dev/input/by-path/pci-0000:00:15.1-platform-i2c_designware.1-event-mouse
P: /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-15/i2c-SYNA2B31:00/0018:06CB:CD3E.0002/input/input16/mouse1
N: input/mouse1
L: 0
S: input/by-path/pci-0000:00:15.1-platform-i2c_designware.1-mouse
E: DEVPATH=/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-15/i2c-SYNA2B31:00/0018:06CB:CD3E.0002/input/input16/mouse1
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/mouse1
E: MAJOR=13
E: MINOR=33
E: USEC_INITIALIZED=11040108
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=pci-0000:00:15.1-platform-i2c_designware.1
E: ID_PATH_TAG=pci-0000_00_15_1-platform-i2c_designware_1
E: DEVLINKS=/dev/input/by-path/pci-0000:00:15.1-platform-i2c_designware.1-mouse
P: /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5
E: SUBSYSTEM=input
E: PRODUCT=19/0/0/0
E: NAME="Ideapad extra buttons"
E: PHYS="ideapad/input0"
E: PROP=0
E: EV=13
E: KEY=81000800100c03 4400000000300000 0 2
E: MSC=10
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,k94,95,BA,BE,C0,C1,CA,CB,D4,E3,F0,F7,ram4,lsfw
E: USEC_INITIALIZED=10211799
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=pci-0000:00:1f.0-platform-VPC2004:00
E: ID_PATH_TAG=pci-0000_00_1f_0-platform-VPC2004_00
E: ID_FOR_SEAT=input-pci-0000_00_1f_0-platform-VPC2004_00
E: TAGS=:seat:
P: /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5/event5
N: input/event5
L: 0
S: input/by-path/pci-0000:00:1f.0-platform-VPC2004:00-event
E: DEVPATH=/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5/event5
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event5
E: MAJOR=13
E: MINOR=69
E: USEC_INITIALIZED=10299784
E: KEYBOARD_KEY_08=f20
E: KEYBOARD_KEY_0d=rfkill
E: KEYBOARD_KEY_42=f23
E: KEYBOARD_KEY_43=f22
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=pci-0000:00:1f.0-platform-VPC2004:00
E: ID_PATH_TAG=pci-0000_00_1f_0-platform-VPC2004_00
E: XKBMODEL=pc105
E: XKBLAYOUT=be
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=19/0/0:ideapad
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1f.0-platform-VPC2004:00-event
E: TAGS=:power-switch:
P: /devices/platform/i8042/serio0/input/input0
L: 0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: SUBSYSTEM=input
E: PRODUCT=11/1/1/ab83
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PROP=0
E: EV=120013
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: MSC=10
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB83-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: USEC_INITIALIZED=1174871
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_BUS=i8042
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: TAGS=:seat:
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
L: 0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event0
E: MAJOR=13
E: MINOR=64
E: USEC_INITIALIZED=10138826
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_BUS=i8042
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=be
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=11/1/1:isa0060/serio0
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: TAGS=:power-switch:
P: /devices/platform/pcspkr/input/input6
L: 0
E: DEVPATH=/devices/platform/pcspkr/input/input6
E: SUBSYSTEM=input
E: PRODUCT=10/1f/1/100
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PROP=0
E: EV=40001
E: SND=6
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: USEC_INITIALIZED=10331603
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_FOR_SEAT=input-platform-pcspkr
E: TAGS=:seat:
P: /devices/platform/pcspkr/input/input6/event6
N: input/event6
L: 0
S: input/by-path/platform-pcspkr-event-spkr
E: DEVPATH=/devices/platform/pcspkr/input/input6/event6
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event6
E: MAJOR=13
E: MINOR=70
E: USEC_INITIALIZED=10425875
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: LIBINPUT_DEVICE_GROUP=10/1f/1:isa0061
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
P: /devices/virtual/misc/uhid/0005:046D:B015.0005/input/input22
L: 0
E: DEVPATH=/devices/virtual/misc/uhid/0005:046D:B015.0005/input/input22
E: SUBSYSTEM=input
E: PRODUCT=5/46d/b015/13
E: NAME="M720 Triathlon Keyboard"
E: PHYS="7C:B2:7D:AF:55:F9"
E: UNIQ="D3:8D:F5:E6:CF:60"
E: PROP=0
E: EV=100013
E: KEY=1000000000007 ff800000000007ff febeffdfffefffff fffffffffffffffe
E: MSC=10
E: MODALIAS=input:b0005v046DpB015e0013-e0,1,4,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,lsfw
E: USEC_INITIALIZED=19561712
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_BUS=bluetooth
E: TAGS=:seat:
P: /devices/virtual/misc/uhid/0005:046D:B015.0005/input/input22/event12
N: input/event12
L: 0
E: DEVPATH=/devices/virtual/misc/uhid/0005:046D:B015.0005/input/input22/event12
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event12
E: MAJOR=13
E: MINOR=76
E: USEC_INITIALIZED=19628933
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_BUS=bluetooth
E: XKBMODEL=pc105
E: XKBLAYOUT=be
E: BACKSPACE=guess
E: LIBINPUT_DEVICE_GROUP=5/46d/b015:7C:B2:7D:AF:55:F9
E: TAGS=:power-switch:
P: /devices/virtual/misc/uhid/0005:046D:B015.0005/input/input23
L: 0
E: DEVPATH=/devices/virtual/misc/uhid/0005:046D:B015.0005/input/input23
E: SUBSYSTEM=input
E: PRODUCT=5/46d/b015/13
E: NAME="M720 Triathlon Mouse"
E: PHYS="7C:B2:7D:AF:55:F9"
E: UNIQ="D3:8D:F5:E6:CF:60"
E: PROP=0
E: EV=17
E: KEY=ffff0000 0 0 0 0
E: REL=1943
E: MSC=10
E: MODALIAS=input:b0005v046DpB015e0013-e0,1,2,4,k110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,r0,1,6,8,B,C,am4,lsfw
E: USEC_INITIALIZED=19561255
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_BUS=bluetooth
E: TAGS=:seat:
P: /devices/virtual/misc/uhid/0005:046D:B015.0005/input/input23/event13
N: input/event13
L: 0
E: DEVPATH=/devices/virtual/misc/uhid/0005:046D:B015.0005/input/input23/event13
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event13
E: MAJOR=13
E: MINOR=77
E: USEC_INITIALIZED=19613309
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_BUS=bluetooth
E: LIBINPUT_DEVICE_GROUP=5/46d/b015:7C:B2:7D:AF:55:F9
P: /devices/virtual/misc/uhid/0005:046D:B015.0005/input/input23/mouse4
N: input/mouse4
L: 0
E: DEVPATH=/devices/virtual/misc/uhid/0005:046D:B015.0005/input/input23/mouse4
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/mouse4
E: MAJOR=13
E: MINOR=36
E: USEC_INITIALIZED=19563907
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_BUS=bluetooth
DRM Information from dmesg:
---------------------------
-- System Information:
Debian Release: bullseye/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.5.0-rc5-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.29-6
ii libdrm-intel1 2.4.100-4
ii libdrm2 2.4.100-4
ii libpciaccess0 0.14-1
ii libpixman-1-0 0.36.0-1
ii libudev1 244-3
ii libx11-6 2:1.6.8-1
ii libx11-xcb1 2:1.6.8-1
ii libxcb-dri2-0 1.13.1-3
ii libxcb-dri3-0 1.13.1-3
ii libxcb-sync1 1.13.1-3
ii libxcb-util0 0.3.8-3+b2
ii libxcb1 1.13.1-3
ii libxcursor1 1:1.2.0-2
ii libxdamage1 1:1.1.5-1
ii libxext6 2:1.3.3-1+b2
ii libxfixes3 1:5.0.3-1
ii libxinerama1 2:1.1.4-2
ii libxrandr2 2:1.5.1-1
ii libxrender1 1:0.9.10-1
ii libxshmfence1 1.3-1
ii libxss1 1:1.2.3-1
ii libxtst6 2:1.2.3-1
ii libxv1 2:1.0.11-1
ii libxvmc1 2:1.0.10-1
ii xserver-xorg-core [xorg-video-abi-24] 2:1.20.7-2
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
Reply to: