Bug#250915: followup
Following your request, I revisited the XF86Config-4 on this machine, and am happy to report
that it is now working fine. The problem was a lack of 'Modeline' entries. With no custom Modeline entries, the driver creates Modelines that do not work on my monitor, blanking the screen. I copied the Modeline entries from my working 3.3.6 XF86Config file to the non-working XF86Config-4 file. Restarted X, and the S3 4.4.3 X server worked fine.
The monitor is an Eizo FlexScan F552-T. I took the monitor frequencies straight off this Eizo support page... http://www.eizo.com/support/discontinued/crt/f552.asp
Below is both the working and non-working output from /usr/share/bug/xserver-xfree86 > /tmp/output 3>&1
First the working output...
Contents of /var/lib/xfree86/X.roster:
xserver-xfree86
/var/lib/xfree86/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 20 May 9 2004 /etc/X11/X -> /usr/bin/X11/XFree86
-rwxr-xr-x 1 root root 1745484 Sep 28 13:09 /usr/bin/X11/XFree86
Contents of /var/lib/xfree86/XF86Config-4.roster:
xserver-xfree86
VGA-compatible devices on PCI bus:
/var/lib/xfree86/XF86Config-4.md5sum does not exist.
XFree86 X server configuration file status:
-rw-r--r-- 1 root root 2861 Nov 8 19:48 /etc/X11/XF86Config-4
Contents of /etc/X11/XF86Config-4:
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 27-65
VertRefresh 55-90
Option "DPMS"
# ModeLines copied from 3.3.6 XF86Config
ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync
Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync
Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync
Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "noaccel" # [<bool>]
#Option "swcursor" # [<bool>]
#Option "slow_dram_refresh" # [<bool>]
#Option "slow_dram" # [<bool>]
#Option "slow_edodram" # [<bool>]
#Option "slow_vram" # [<bool>]
Identifier "Card0"
Driver "s3"
VendorName "S3 Inc."
BoardName "86c764/765 [Trio32/64/64V+]"
BusID "PCI:0:13:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Modes "800x600"
Depth 1
EndSubSection
SubSection "Display"
Modes "800x600"
Depth 4
EndSubSection
SubSection "Display"
Modes "800x600"
Depth 8
EndSubSection
SubSection "Display"
Modes "800x600"
Depth 15
EndSubSection
SubSection "Display"
Modes "800x600"
Depth 16
EndSubSection
EndSection
XFree86 X server log files on system:
-rw-r--r-- 1 root root 24904 Nov 8 19:29 /var/log/XFree86.0.log
Contents of most recent XFree86 X server log file
/var/log/XFree86.0.log:
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.26 i686 [ELF]
Build Date: 28 September 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.27-1-586tsc (joshk@trollwife) (gcc version 3.3.4 (Debian 1:3.3.4-9)) #1 Fri Sep 3 06:38:00 UTC 2004
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Nov 8 19:22:29 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(WW) The directory "/usr/X11R6/lib/X11/fonts/CID/" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000800c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1250 card 0000,0000 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:07:0: chip 8086,7000 card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7010 card 0000,0000 rev 00 class 01,01,80 hdr 00
(II) PCI: 00:0d:0: chip 5333,8811 card 0000,0000 rev 54 class 03,00,00 hdr 00
(II) PCI: 00:10:0: chip 1106,3106 card 1186,1403 rev 86 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:13:0) S3 Inc. 86c764/765 [Trio32/64/64V+] rev 84, Mem @ 0xf8000000/26
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xffbefc00 - 0xffbefcff (0x100) MX[B]
[1] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[2] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
[3] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xffbefc00 - 0xffbefcff (0x100) MX[B]
[1] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[2] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
[3] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xffbefc00 - 0xffbefcff (0x100) MX[B]
[6] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
[10] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o": No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "s3"
(II) Loading /usr/X11R6/lib/modules/drivers/s3_drv.o
(II) Module s3: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.3.5
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968,
Trio32/64, Aurora64V+, Trio64V2/DX or /GX
(II) Primary Device is: PCI 00:0d:0
(--) Chipset Trio32/64 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xffbefc00 - 0xffbefcff (0x100) MX[B]
[6] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
[10] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xffbefc00 - 0xffbefcff (0x100) MX[B]
[6] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[7] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[8] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[9] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
[13] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[14] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[15] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) s3(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) s3(0): Depth 16, (--) framebuffer bpp 16
(==) s3(0): RGB weight 565
(==) s3(0): Default visual is TrueColor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) s3(0): Primary V_BIOS segment is: 0xc000
(WW) System lacks support for changing MTRRs
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) s3(0): VESA BIOS detected
(II) s3(0): VESA VBE Version 1.2
(II) s3(0): VESA VBE Total Mem: 1024 kB
(II) s3(0): VESA VBE OEM: S3 Incorporated. Trio64V+
(==) s3(0): Using gamma correction (1.0, 1.0, 1.0)
(**) s3(0): Chipset: "Trio32/64"
(--) s3(0): Framebuffer @ 0xf8000000
(--) s3(0): videoRam = 1024 Kb
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) s3(0): MCLK 54.886 Mhz
(--) s3(0): RefClock: 16000
(--) s3(0): Max pixel clock at this depth is 80 Mhz
(II) s3(0): Monitor0: Using hsync range of 27.00-65.00 kHz
(II) s3(0): Monitor0: Using vrefresh range of 55.00-90.00 Hz
(II) s3(0): Clock range: 16.00 to 80.00 MHz
(II) s3(0): Not using mode "800x600" (vrefresh out of range)
(II) s3(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1152x864" (insufficient memory for mode)
(II) s3(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) s3(0): Not using default mode "896x672" (insufficient memory for mode)
(II) s3(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) s3(0): Not using default mode "896x672" (insufficient memory for mode)
(II) s3(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) s3(0): Not using default mode "928x696" (insufficient memory for mode)
(II) s3(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) s3(0): Not using default mode "928x696" (insufficient memory for mode)
(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) s3(0): Not using default mode "960x720" (insufficient memory for mode)
(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) s3(0): Not using default mode "960x720" (insufficient memory for mode)
(II) s3(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1152x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) s3(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) s3(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) s3(0): Not using default mode "960x720" (insufficient memory for mode)
(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "832x624" (width too large for virtual size)
(--) s3(0): Virtual size is 800x600 (pitch 800)
(**) s3(0): *Mode "800x600": 60.8 MHz, 55.8 kHz, 85.0 Hz
(II) s3(0): Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -hsync -vsync
(**) s3(0): Mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) s3(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) s3(0): Mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) s3(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) s3(0): Mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) s3(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) s3(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) s3(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) s3(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) s3(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) s3(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) s3(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) s3(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) s3(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) s3(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) s3(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) s3(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) s3(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) s3(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) s3(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(==) s3(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf8000000 - 0xfbffffff (0x4000000) MS[B]
[1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xffbefc00 - 0xffbefcff (0x100) MX[B]
[7] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
[14] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[15] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[16] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(==) s3(0): Backing store disabled
(II) s3(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 color pattern filled rectangles
Solid Lines
(II) s3(0): Acceleration enabled
(II) s3(0): Using PIO
(II) s3(0): Using SW cursor
(**) Option "dpms"
(**) s3(0): DPMS enabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "auto"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse0: Buttons: 3
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "PS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
(II) 3rd Button detected: disabling emulate3Button
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) s3(0): Acceleration enabled
(II) s3(0): Using PIO
(II) s3(0): Using SW cursor
(**) s3(0): DPMS enabled
(==) RandR enabled
(II) Mouse0: ps2EnableDataReporting: succeeded
Here's the non-working output, in case your interested...
Contents of /var/lib/xfree86/X.roster:
xserver-xfree86
/var/lib/xfree86/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 20 May 9 2004 /etc/X11/X -> /usr/bin/X11/XFree86
-rwxr-xr-x 1 root root 1745484 Sep 28 13:09 /usr/bin/X11/XFree86
Contents of /var/lib/xfree86/XF86Config-4.roster:
xserver-xfree86
VGA-compatible devices on PCI bus:
/var/lib/xfree86/XF86Config-4.md5sum does not exist.
XFree86 X server configuration file status:
-rw-r--r-- 1 root root 2866 Nov 8 19:51 /etc/X11/XF86Config-4
Contents of /etc/X11/XF86Config-4:
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 27-65
VertRefresh 55-90
Option "DPMS"
# ModeLines copied from 3.3.6 XF86Config
#ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
#Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync
#Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync
#Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync
#Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "noaccel" # [<bool>]
#Option "swcursor" # [<bool>]
#Option "slow_dram_refresh" # [<bool>]
#Option "slow_dram" # [<bool>]
#Option "slow_edodram" # [<bool>]
#Option "slow_vram" # [<bool>]
Identifier "Card0"
Driver "s3"
VendorName "S3 Inc."
BoardName "86c764/765 [Trio32/64/64V+]"
BusID "PCI:0:13:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Modes "800x600"
Depth 1
EndSubSection
SubSection "Display"
Modes "800x600"
Depth 4
EndSubSection
SubSection "Display"
Modes "800x600"
Depth 8
EndSubSection
SubSection "Display"
Modes "800x600"
Depth 15
EndSubSection
SubSection "Display"
Modes "800x600"
Depth 16
EndSubSection
EndSection
XFree86 X server log files on system:
-rw-r--r-- 1 root root 24614 Nov 8 19:49 /var/log/XFree86.0.log
Contents of most recent XFree86 X server log file
/var/log/XFree86.0.log:
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione@fabbione.net)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.26 i686 [ELF]
Build Date: 28 September 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.27-1-586tsc (joshk@trollwife) (gcc version 3.3.4 (Debian 1:3.3.4-9)) #1 Fri Sep 3 06:38:00 UTC 2004
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Nov 8 19:49:39 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(WW) The directory "/usr/X11R6/lib/X11/fonts/CID/" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000003c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1250 card 0000,0000 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:07:0: chip 8086,7000 card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7010 card 0000,0000 rev 00 class 01,01,80 hdr 00
(II) PCI: 00:0d:0: chip 5333,8811 card 0000,0000 rev 54 class 03,00,00 hdr 00
(II) PCI: 00:10:0: chip 1106,3106 card 1186,1403 rev 86 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:13:0) S3 Inc. 86c764/765 [Trio32/64/64V+] rev 84, Mem @ 0xf8000000/26
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xffbefc00 - 0xffbefcff (0x100) MX[B]
[1] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[2] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
[3] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xffbefc00 - 0xffbefcff (0x100) MX[B]
[1] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[2] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
[3] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xffbefc00 - 0xffbefcff (0x100) MX[B]
[6] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
[10] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o": No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "s3"
(II) Loading /usr/X11R6/lib/modules/drivers/s3_drv.o
(II) Module s3: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.3.5
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968,
Trio32/64, Aurora64V+, Trio64V2/DX or /GX
(II) Primary Device is: PCI 00:0d:0
(--) Chipset Trio32/64 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xffbefc00 - 0xffbefcff (0x100) MX[B]
[6] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
[10] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xffbefc00 - 0xffbefcff (0x100) MX[B]
[6] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[7] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[8] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[9] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
[13] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[14] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[15] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) s3(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) s3(0): Depth 16, (--) framebuffer bpp 16
(==) s3(0): RGB weight 565
(==) s3(0): Default visual is TrueColor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) s3(0): Primary V_BIOS segment is: 0xc000
(WW) System lacks support for changing MTRRs
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) s3(0): VESA BIOS detected
(II) s3(0): VESA VBE Version 1.2
(II) s3(0): VESA VBE Total Mem: 1024 kB
(II) s3(0): VESA VBE OEM: S3 Incorporated. Trio64V+
(==) s3(0): Using gamma correction (1.0, 1.0, 1.0)
(**) s3(0): Chipset: "Trio32/64"
(--) s3(0): Framebuffer @ 0xf8000000
(--) s3(0): videoRam = 1024 Kb
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) s3(0): MCLK 54.886 Mhz
(--) s3(0): RefClock: 16000
(--) s3(0): Max pixel clock at this depth is 80 Mhz
(II) s3(0): Monitor0: Using hsync range of 27.00-65.00 kHz
(II) s3(0): Monitor0: Using vrefresh range of 55.00-90.00 Hz
(II) s3(0): Clock range: 16.00 to 80.00 MHz
(II) s3(0): Not using mode "800x600" (vrefresh out of range)
(II) s3(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1152x864" (insufficient memory for mode)
(II) s3(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) s3(0): Not using default mode "896x672" (insufficient memory for mode)
(II) s3(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) s3(0): Not using default mode "896x672" (insufficient memory for mode)
(II) s3(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) s3(0): Not using default mode "928x696" (insufficient memory for mode)
(II) s3(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) s3(0): Not using default mode "928x696" (insufficient memory for mode)
(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) s3(0): Not using default mode "960x720" (insufficient memory for mode)
(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) s3(0): Not using default mode "960x720" (insufficient memory for mode)
(II) s3(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1152x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) s3(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) s3(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) s3(0): Not using default mode "960x720" (insufficient memory for mode)
(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "832x624" (width too large for virtual size)
(--) s3(0): Virtual size is 800x600 (pitch 800)
(**) s3(0): *Mode "800x600": 60.8 MHz, 55.8 kHz, 85.0 Hz
(II) s3(0): Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -hsync -vsync
(**) s3(0): Mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) s3(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) s3(0): Mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) s3(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) s3(0): Mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) s3(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) s3(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) s3(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) s3(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) s3(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) s3(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) s3(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) s3(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) s3(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) s3(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) s3(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) s3(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) s3(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) s3(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) s3(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(==) s3(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf8000000 - 0xfbffffff (0x4000000) MS[B]
[1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xffbefc00 - 0xffbefcff (0x100) MX[B]
[7] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
[14] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[15] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[16] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(==) s3(0): Backing store disabled
(II) s3(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 color pattern filled rectangles
Solid Lines
(II) s3(0): Acceleration enabled
(II) s3(0): Using PIO
(II) s3(0): Using SW cursor
(**) Option "dpms"
(**) s3(0): DPMS enabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "auto"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse0: Buttons: 3
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "PS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
___________________________________________________
Create your own safe chat rooms.
http://www.homemaster.net - Homemaster. Come Together. Online.
Reply to: