[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: X Server for Ultra 10 with Creator 3D ??



The output of cat /dev/fb is:

0 Creator
1 ATY Mach64

I tried to run the Xsun24 server on the fb0 device, but I only get a
blank screen and the mesage is:

----------
(using VT number 7)

X connection to :0.0 broken (explicit kill or server shutdown)
-----------

Thats it ! Because there is no -probeonly option to the Xsun24 server
thats about it on information about the server and the card.

The second server, the Mach64 server starts up and stops with the
message:

----------
XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
        If the server is older than 6-12 months, or if your card is
newer
        than the above date, look for a newer version before reporting
        problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.15-pre14 sparc64 [ELF]
Configured drivers:
  Mach64: accelerated server for ATI Mach64 graphics adaptors
(Patchlevel 0)
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: model: "sun"
(**) XKB: keycodes: "sun(type5)"
(**) Mouse: type: sun, device: /dev/mouse, buttons: 3
(**) Mach64: Graphics device ID: "My Video Card"
(**) Mach64: Monitor ID: "Sony Multiscan 17seII"
(--) Mach64: Mode "1280x1024x76" needs hsync freq of 81.13 kHz. Deleted.

(**) FontPath set to
"/usr/lib/X11/fonts/misc/:unscaled,/usr/lib/X11/fonts/cyrillic/:unscaled,/usr/l

ib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Speedo/,/usr/lib

/X11/fonts/Type1/,/usr/lib/X11/fonts/misc/,/usr/lib/X11/fonts/cyrillic/,/usr/lib/X11/fonts/100dpi/,/

usr/lib/X11/fonts/75dpi/"
(--) Mach64: PCI: Mach64 RagePro rev 92, Aperture @ 0xe1000000,
Registers @ 0xe2000000, Block I/O @
0xc00100

Fatal server error:
InitIOAddresses: Sparse IO requested, can't handle on SPARC
 ----------------------------

So what is the next thing to try ??

Thank you for any help !

Peter Biechele
Peter.Biechele@uni-freiburg.de

begin:vcard 
n:Biechele;Peter
x-mozilla-html:FALSE
org:Universität Freiburg;Rechenzentrum
adr:;;;;;;
version:2.1
email;internet:Peter.Biechele@uni-freiburg.de
title:Dr.
x-mozilla-cpt:;27360
fn:Peter Biechele
end:vcard

Reply to: