Smell like the program need x in ordre to run...
Package: hplip
Version: 3.13.4-1
Severity: serious
Dear Maintainer,
My printer LaserJet1018 works no more with latest hplip package.
Printer can be detected and setup via hp-setup just nicely, but for any
job (incl. test page) I get:
stopped
"/usr/lib/cups/filter/hpcups failed"
Also, when I reboot with my printer plugged-in, my system doesn't boot.
This is I believe the relevant part from /var/log/messages:
May 28 08:42:09 sol kernel: [ 26.243235] lp: driver loaded but no devices found
May 28 08:42:09 sol kernel: [ 26.273256] ppdev: user-space parallel port driver
May 28 08:46:22 sol kernel: [ 278.743066] usb 1-1.2: USB disconnect, device number 3
May 28 08:46:41 sol hp-probe: hp-probe[5284]: warning: hp-probe should not be run as root/superuser.
May 28 08:46:48 sol kernel: [ 304.274112] usb 2-1.1: new high-speed USB device number 4 using ehci_hcd
May 28 08:46:48 sol kernel: [ 304.386512] usb 2-1.1: New USB device found, idVendor=03f0, idProduct=4117
May 28 08:46:48 sol kernel: [ 304.386519] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
May 28 08:46:48 sol kernel: [ 304.386524] usb 2-1.1: Product: HP LaserJet 1018
May 28 08:46:48 sol kernel: [ 304.386528] usb 2-1.1: Manufacturer: Hewlett-Packard
May 28 08:46:48 sol kernel: [ 304.386531] usb 2-1.1: SerialNumber: KP3FK5P
May 28 08:46:48 sol kernel: [ 304.389903] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4117
May 28 08:46:48 sol logger: loading hp_laserjet_1018 firmware 002 004
May 28 08:46:48 sol hp-firmware: hp-firmware[5293]: warning: No display found.
May 28 08:46:51 sol kernel: [ 307.498939] usblp0: removed
May 28 08:47:19 sol hp-setup: hp-setup[5325]: warning: Qt/PyQt 4 initialization failed.
May 28 08:47:52 sol hp-testpage: hp-testpage[5378]: warning: hp-testpage should not be run as root/superuser.
May 28 08:47:52 sol hp-testpage: hp-testpage[5378]: warning: Qt/PyQt 4 initialization failed.
May 28 08:48:22 sol hp-firmware: hp-firmware[5427]: warning: Qt/PyQt 4 initialization failed.
I'm ready to provide any additional info,
Andrey Paramonov
-- Package-specific info:
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (1000, 'testing'), (200, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages hplip depends on:
ii adduser 3.113+nmu3
ii coreutils 8.13-3.5
ii cups 1.5.3-5
ii hplip-data 3.13.4-1
ii libc6 2.17-3
ii libcups2 1.5.3-5
ii libdbus-1-3 1.6.10-1
ii libhpmud0 3.13.4-1
ii libsane 1.0.22-7.4
ii libsane-hpaio 3.13.4-1
ii libsnmp15 5.4.3~dfsg-3
ii libssl1.0.0 1.0.1e-2
ii libusb-1.0-0 2:1.0.15-1
ii lsb-base 4.1+Debian11
ii policykit-1 0.105-3
ii printer-driver-hpcups 3.13.4-1
ii python 2.7.3-5
ii python-dbus 1.2.0-1
ii python-gobject-2 2.28.6-12+b1
ii python-imaging 1.1.7-4
ii python-pexpect 2.4-1
ii python-reportlab 2.5-1.1
ii wget 1.14-1
Versions of packages hplip recommends:
ii avahi-daemon 0.6.31-2
ii printer-driver-postscript-hp 3.13.4-1
ii sane-utils 1.0.22-7.4
Versions of packages hplip suggests:
pn hplip-doc <none>
pn hplip-gui <none>
ii python-notify 0.1.1-3
pn system-config-printer <none>
-- no debconf information