Re: problem installing debian on O2
Le mardi 03 mai 2005 à 00:49 +0200, Thiemo Seufer a écrit :
> Jean-Yves Leblin wrote:
> [snip]
> > tip32: IP32 Linux tftpboot loader 0.3.8.6
> > Loading program segment 1 at 0x80004000, size = 0xZeroing memory at
> > 0x80454086,
> > size = 0x3cf9a
> > Starting kernel; entry point = 0x80419000
> > Copied initrd from 0x8185c890 to 0x80492000 (0x1a89aa bytes)
> >
> > and then hangs
>
Thanks a lot for your answer
> It probably doesn't hang but listens on the serial console instead of
> the graphical one, or vice versa. Make sure the "console" firmware
> variable points to the correct device, or override the firmware setting,
> e.g. from serial to graphical console via
>
> bootp():o2-boot.img append="console=tty0"
>
well it's not better, but i've probably found the reason (which is
probably that i'm stupid ...) : the whole boot process works perfectly
with this image (and only this one):
http://www.linux-mips.org/~glaurung/O2/linux-2.5.4/kernel/vmlinux-r10k
(i've got a kernel panic because of a root= pb but that's not the
problem right now ...), but this image has been made for R10000 which
probably meens that i have an R10000 and it seems that the method
described here :
http://www.cyrius.com/debian/o2/
only works with R5000 R5200 and R7000.
In fact I've just checked and I HAVE a R10000 (i should have started
with this ...)
Is there an existing image to install debian with this method on
R10000 ? (R10000 seem not to be well supported ...)
thanks for all (and sorry for my mistakes)
JY
Reply to: