Fw: Re: IrDA on Nec VXI
On Wed, 07 Aug 2002 12:20:40 +0200, Werner Heuser <Werner.Heuser@web.de> wrote:
| > IRDADEV=/dev/ttyS3
| ...
| > How can I know if the SIR is correct ?
| search with dmesg for tty devices and guess the one that is
| the IrDA port, also look up the BIOS if there is FIR disable it
|
I have no FIR in my AMIBIOS. Only a Serial IR that I set to auto
for the IRQ/MEM settings.
| > ...
| > Aug 7 11:18:25 tanna irattach: tcsetattr: Input/output errors
| > ...
|
| looks like you have to use setserial to set
| /dev/ttyS3 to uart none (or even another option like irq 3, but
| this is sort of guesswork), ttyS3 is not common usually
| ttyS1 or ttyS2 is used for IrDA, please check again,
| and maybe disabling other services: PCMCIA, sound, etc.
| helps to debug the problem
|
I have made a test
SIR disabled : no ttyS03 detected
SIR enabled (auto) : ttyS03 detected
So, the ttyS3 seems to be my SIR :-)
ttyS0 is my db9 serial connector
ttyS1 is my PCMCIA modem card
ttyS2 is unknown but I have a winmodem in my laptop !:-)
it's not configured in linux but !
ttyS3 seems to be my SIR
"irda start" works if I put the irdadev to ttyS0 !:-|
Do I have to insmod other driver like
- toshoboe.o
- smc-ircc.o
- nsc-ircc.o
???
François
| ...
| > I'have red your HOWTO Werner and done all you describe (I think :-)
| > I have certainly missed something and that's why I ask for help on
| > the list .
|
| no problem you are welcome, I just wanted to make sure you know
| it and I admit IrDA isn't sometimes easy to get to work
|
| Good luck
|
| Werner
|
| PS: Please don't CC me.
|
Reply to: