setserial use w/ pcmcia
i have a big problem with setserial. when i first
install debian, everything works well. the only
anomoly is after the first reboot i have to run
pppconfig again because modem changes from /dev/ttyS1
tp /dev/ttyS2. When i upgrade to a 2.4.x kernel, it
again changes to /dev/tttyS4.
But my problem is when i install a new version of
setserial. When I do, pppconfig is unable to find the
modem. Debconf gives three choices when configuring
it initially:
1) Auto-save Once
2) Autosave Always
3) Kernel Settings
I've tried all three without success. Always after
the first shutdown after upgrading setserial, the
modem is non-findable with a pppconfig auto-probe.
Nor does it work if i manually set the /dev.
I've tried manually setting the setserial parameters
to what they are when they work, it doesnt help. I've
tried reverting back to the original version of
setserial. I've tried a new kernel build and
pcmcia-cs build.
I dont know what i can do. Maybe someone here can help.
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
Reply to: