Re: hello
thank you for all your help. I am amazed how many people actually responded to that. I tried all of the commands, none of them worked. I think the problem may be that I do not have the dummy module. I knew to install it, but it wasnt on the cd that I have. If thats the problem Im really confused on what to do from here. I am attaching a copy of some of the things that I did when I tried your commands. if you have other specific commands for me to run, please let me know
thanks,
tomas
Ipchains -L output
Chain output (policy DENY):
target prot opt source destination ports
ACCEPT all ------ anywhere anywhere n/a
ACCEPT all ------ anywhere localnet/24 n/a
ipfwadm -O -l
(this returned this error)
ipfwadm: cannot open file /proc/net/ip_output
ipmasq returned no errors
ifconfig
eth0 Link encap:Ethernet HWaddr 00:80:C7:CC:46:C5
unspec addr:[NONE SET] Bcast:[NONE SET] Mask:[NONE SET]
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5940 errors:0 dropped:0 overruns:0 frame:0
TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:3 Base address:0x310
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:3924 Metric:1
RX packets:24 errors:0 dropped:0 overruns:0 frame:0
TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
copy of /etc/init.d/network
#!/bin/sh
ifconfig lo 127.0.0.1
route add -net 127.0.0.0
IPADDR=192.168.42.42
NETMASK=255.255.255.0
BROADCAST=192.168.1.255
ifconfig eth0 ${IPADDR} netmask ${NETMASK} broadcast ${BROADCAST}
Reply to:
- Follow-Ups:
- Re: hello
- From: Charles Baker <Charles-Baker@utc.edu>
- References:
- Re: hello
- From: Alexander Clouter <alexander.clouter@ic.ac.uk>