Bug#927252: marked as done (linux-4.19.0-4-arm64: Enable SPI CAN drivers for ARM/AARCH64)
Your message dated Mon, 06 Jun 2022 20:10:09 +0000
with message-id <E1nyJ3B-000Fd1-D5@fasolo.debian.org>
and subject line Bug#927252: fixed in linux 5.18.2-1
has caused the Debian Bug report #927252,
regarding linux-4.19.0-4-arm64: Enable SPI CAN drivers for ARM/AARCH64
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)
--
927252: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=927252
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-4.19.0-4-arm64: Enable SPI CAN drivers for ARM/AARCH64
- From: Gregor Riepl <onitake@gmail.com>
- Date: Tue, 16 Apr 2019 22:04:08 +0000
- Message-id: <155545224831.3048.17308165835941698027.reportbug@matemat>
Package: src:linux
Version: 4.19.28-2
Severity: wishlist
Tags: patch
Dear Maintainer,
Please consider enabling the SPI-attached CAN bus drivers in the Debian kernel.
They are useful on ARM SoCs with an SPI bus, such as the Raspberry Pi.
The Raspbian kernel package already includes these drivers, and they do no
harm on platforms that don't use them. To load these drivers, a suitable
DeviceTree config is required.
Thank you!
Here's a patch for .config:
--- a/.config 2019-03-15 02:16:04.000000000 +0000
+++ b/.config 2019-04-16 21:46:33.124431597 +0000
@@ -1696,8 +1699,8 @@
#
# CAN SPI interfaces
#
-# CONFIG_CAN_HI311X is not set
-# CONFIG_CAN_MCP251X is not set
+CONFIG_CAN_HI311X=m
+CONFIG_CAN_MCP251X=m
#
# CAN USB interfaces
-- Package-specific info:
** Version:
Linux version 4.19.0-4-arm64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-2)) #1 SMP Debian 4.19.28-2 (2019-03-15)
** Command line:
bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 dma.dmachans=0x7f35 bcm2709.boardrev=0xa020d3 bcm2709.serial=0xffbcac2c bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=29 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=B8:27:EB:BC:AC:2C vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 root=/dev/mmcblk0p2 rw elevator=deadline fsck.repair=yes net.ifnames=0 cma=256M rootwait
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
Device Tree model: Raspberry Pi 3 Model B Plus Rev 1.3
** Loaded modules:
at24
i2c_dev
ip6t_REJECT
nf_reject_ipv6
nft_counter
ipt_REJECT
nf_reject_ipv4
xt_tcpudp
xt_comment
nft_compat
nf_tables
nfnetlink
nls_ascii
nls_cp437
vfat
fat
btsdio
bluetooth
vc4
drbg
snd_soc_core
ansi_cprng
ecdh_generic
snd_pcm_dmaengine
snd_pcm
microchip
brcmfmac
snd_timer
snd
soundcore
brcmutil
lan78xx
cec
cfg80211
drm_kms_helper
of_mdio
fixed_phy
drm
libphy
rfkill
vchiq(C)
pwm_bcm2835
bcm2835_thermal
bcm2835_rng
rng_core
bcm2835_wdt
leds_gpio
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
fscrypto
ecb
aes_arm64
dwc2
udc_core
usbcore
sdhci_iproc
sdhci_pltfm
sdhci
usb_common
bcm2835
i2c_bcm2835
phy_generic
** PCI devices:
not available
** USB devices:
not available
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: arm64 (aarch64)
Kernel: Linux 4.19.0-4-arm64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_CRAP
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-4-arm64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-4-arm64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
ii irqbalance 1.5.0-3
Versions of packages linux-image-4.19.0-4-arm64 suggests:
pn debian-kernel-handbook <none>
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-4-arm64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 20190114-1
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
--- Begin Message ---
Source: linux
Source-Version: 5.18.2-1
Done: Salvatore Bonaccorso <carnil@debian.org>
We believe that the bug you reported is fixed in the latest version of
linux, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 927252@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Salvatore Bonaccorso <carnil@debian.org> (supplier of updated linux package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Mon, 06 Jun 2022 20:45:23 +0200
Source: linux
Architecture: source
Version: 5.18.2-1
Distribution: unstable
Urgency: medium
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: Salvatore Bonaccorso <carnil@debian.org>
Closes: 927252 1008933 1011168 1012298
Changes:
linux (5.18.2-1) unstable; urgency=medium
.
* New upstream stable update:
https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.18.1
https://www.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.18.2
- netfilter: nf_tables: disallow non-stateful expression in sets earlier
(CVE-2022-1966)
- pipe: Fix missing lock in pipe_resize_ring() (ZDI-CAN-17291)
- netfilter: nf_tables: sanitize nft_set_desc_concat_parse() (CVE-2022-1972)
- [x86] fpu: KVM: Set the base guest FPU uABI size to sizeof(struct
kvm_xsave) (Closes: #1011168)
- KVM: x86: avoid calling x86 emulator without a decoded instruction
(CVE-2022-1852)
.
[ Diederik de Haas ]
* [arm64,armel.marvell] Remove duplicate MTD_SPI_NOR config option
* [arm64] Remove duplicate CAN_MCP251X config option
* drivers/net/can/spi: Enable CAN_HI311X as module (Closes: #927252)
.
[ Henning Schild ]
* [x86] drivers/platform/x86: Enable SIEMENS_SIMATIC_IPC as module
* [x86] drivers/leds: Enable LEDS_SIEMENS_SIMATIC_IPC as module
* [x86] drivers/wdt: Enable SIEMENS_SIMATIC_IPC_WDT as module
.
[ Lubomir Rintel ]
* [x86] Enable X86_ANDROID_TABLETS as a module
.
[ Michal Simek ]
* [arm64] Enable Xilinx PHY driver and SI5341 clock driver
.
[ Zhang Ning ]
* [arm64] Enable COMMON_CLK_PWM which is needed for some Amlogic SBCs
* [arm64] Enable Khadas MCU and fan
* [arm64] cpufreq: Enable SCPI cpufreq driver
* [arm64] cpuidle: Enable CONFIG_ARM_PSCI_CPUIDLE
.
[ Ben Hutchings ]
* drivers/firmware: Build ISCSI_IBFT as module on all architectures with
ACPI. Thanks to Eric Mackay. (Closes: #1008933).
* intel-iommu: Correct matching of the "intgpu_off" option value.
Thanks to Markus Kolb.
* random: Enable RANDOM_TRUST_BOOTLOADER. This can be reverted using the
kernel parameter: random.trust_bootloader=off
.
[ Bastian Blank ]
* [amd64] Enable X86_SGX.
.
[ Salvatore Bonaccorso ]
* block, loop: support partitions without scanning (Closes: #1012298)
* Set ABI to 1
Checksums-Sha1:
bbc978531c7e2163a2289e3e0bc99e99839401a1 251540 linux_5.18.2-1.dsc
a90a7730fbeee7e645054ece183fe17531c97120 131643692 linux_5.18.2.orig.tar.xz
e0619b35776f131e195dac987f6b40cdd3444646 1309660 linux_5.18.2-1.debian.tar.xz
65338b5ed8b7d44ad3a7ab4f0fb6e4cb319f9f67 6456 linux_5.18.2-1_source.buildinfo
Checksums-Sha256:
fbff0455062e7392458992cbff2373f61b7c0073fb5ef4749c4b5ded3ae19cb8 251540 linux_5.18.2-1.dsc
1f38e1d57100000738cefce48a6e0793f40ea3483673400b66a6608548813637 131643692 linux_5.18.2.orig.tar.xz
42fadd9251319aa9be5970d2b1379406411672fba4f6d91fa493593a8a12fa2f 1309660 linux_5.18.2-1.debian.tar.xz
b2653b3570fdda4bdff0138158a0e47449aba949a4089a31bc6342a280a13611 6456 linux_5.18.2-1_source.buildinfo
Files:
74154bc9d12f3b4eb0c84e95f6a9fb6f 251540 kernel optional linux_5.18.2-1.dsc
382bb41286c2d066099a85868ade9414 131643692 kernel optional linux_5.18.2.orig.tar.xz
421f4510eb8c14390b1dfdf29134c435 1309660 kernel optional linux_5.18.2-1.debian.tar.xz
2de951e2c66717a70faa5ee66660db8d 6456 kernel optional linux_5.18.2-1_source.buildinfo
-----BEGIN PGP SIGNATURE-----
iQKmBAEBCgCQFiEERkRAmAjBceBVMd3uBUy48xNDz0QFAmKeS+xfFIAAAAAALgAo
aXNzdWVyLWZwckBub3RhdGlvbnMub3BlbnBncC5maWZ0aGhvcnNlbWFuLm5ldDQ2
NDQ0MDk4MDhDMTcxRTA1NTMxRERFRTA1NENCOEYzMTM0M0NGNDQSHGNhcm5pbEBk
ZWJpYW4ub3JnAAoJEAVMuPMTQ89EaC0P/RG4h3wXhJLuHkx+lREXUpG7T4xcivco
rfxGqun9FJxVOEAnbkzdUH4aDvUNJ83/sH+1k1kUYpjyzp+6hiiPkRUd1WJYmlXf
sVvkWJIs25yxNtzCeLm419vPwS2gMCnLgg/WjsLr2Yl59ef/KIedxDDzdcdYBigG
D6yR7ecIRAq1Fuiuv1YcpEUb+TC1TwF1mjiOTOkyqCyR+4Bi9/Lg1GoTIzDfhqUe
K4As4o7XU85c/bACc/UoVrtOWLE+hQ7X9tZWOfr8CKLEOyy+pDO2GJPmUcLLpl0C
5qcz44+gQigWXMuZ1cG2cN8L8By5hJWKGBb9ny471ElPz4/x/GynHyRz6hVoaeet
1Pgyexi4Rcoc1CzLP+iDCMwowBP6PBSWFc/yj8/76wcgx1h6XlKJwNMMTOG0SCCO
WbijgEaTgSD3f/JpB7PK9i6lfnCk8PgQXsgP2Njq8ngnLBylqFZMfyX2Mu/BChzA
Nozi5zoVDqAmMvtyb5tywkdzXRYtrU8flMKCtxhi5KKmRJZYMGV4HB8nv6TY6f6f
lGLPIS4H7MQaoUiQOVfMGALEF1JKm7IHaNdVadGQNV5NBXr2ksUFv+jPqQVQE1WN
VtEtV1F63MlbLyh0ZTkF2LUHUCXS5pxhcuPYST4u4f2/mJvzzSo/syMf6xB7byxA
DMFKZchdKO03
=P5yF
-----END PGP SIGNATURE-----
--- End Message ---
Reply to: